Tender For Construction Of C Type Quarters For Senior Civil Judge At Hinjilicut In The District Of Ganjam.
Tender Value
90.83 Lakhs
Estimated cost
Bid Submission
16 Aug 2023
0 days left
EMD
90900
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
hinjilicut → Odisha
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of C Type Quarters For Senior Civil Judge At Hinjilicut In The District Of Ganjam. Building Work
BOQ
| Sl. No. | Item Description |
| 1 | Civil Work : Earth work inexcavation of foundation in Hard soilwith all leads and lifts including dressing and leveling the bed and depositing the excavated earth at places away from work site with all leads and lifts including cost of all labour and T&P and dewatering if required for the work etc. complete and as directed by the Engineer-in-charge |
| 2 | Earth work in stoney earth and gravels mixed with stone and boulder not exceeding 0.014 cum in volume soil within 50m lead and 1.5m lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m in depth including cost of all labour and T&P and dewatering if required for the work etc. complete and as directed by the Engineer-in-charge |
| 3 | Supplying & filling in foundation & plinth with sand in 23.5cm(9”) thick layers including watering & ramming with cost, conveyance, royalties taxes the materials & labour with T&P required for the work etc.,complete as per direction of Engineer-in-Charge. |
| 4 | Cement concrete of proportion (1:4:8) in foundation and floors using 4cm size hard black crusher broken granite chips of approved quality and from approved quarry including hoisting, lowering and laying concrete, watering and curing for four weeks with cost, conveyance, taxes and royalities of all materials with labour, T&P etc. complete as per approved specification & direction of the Engineer-In-Charge. |
| 5 | Cement concrete of proportion (1:2:4) using 12 mm to 20 mm size (20 mm not to exceed 25%) hard black crusher broken granite chips of approved quality and from approved quarry including hoisting, lowering and laying concrete, watering and curing for four weeks with cost, conveyance, taxes and royalities of all materials with labour, T&P etc. complete as per approved specification & direction of the Engineer-In-Charge. |
| 6 | Flyash Brick masonry in C.M. (1:6) using 9\" size in Foundation & Plinth using of 23cmx11cmx8cm size brick having a crushing strength of not less than 75 kg per Sq.cm including splays, cuttings, circular moldings, watering & curing for 7 days, cost, conveyance, royalties of all materials, labour with T&P etc. complete in all respect as directed by the Engineer-in-charge. |
| 7 | Flyash Brick masonry in C.M. (1:6) using 9\" size in Superstructure using of 23cmx11cmx8cm size brick having a crushing strength of not less than 75 kg per Sq.cm including splays, cuttings, circular moldings, watering & curing for 7 days, cost, conveyance, royalties of all materials, labour with T&P etc. complete in all respect as directed by the Engineer-in-charge. Ground Floor |
| 8 | First Floor |
| 9 | Second Floor |
| 10 | Flyash Brick masonry in C.M. (1:4) using 9\" size in Superstructure using of 23cmx11cmx8cm size brick having a crushing strength of not less than 75 kg per Sq.cm including splays, cuttings, circular moldings, watering & curing for 7 days, cost, conveyance, royalties of all materials, labour with T&P etc. complete in all respect as directed by the Engineer-in-charge.Ground Floor |
| 11 | First Floor |
| 12 | R.C.C. work of M-20 grade having minimum compressive strength in work test of 200 Kg/Cm2 at 28 days using20 mm and down graded size black hard crusher broken granite stone chips of approved quality and from approved quarry including hoisting lowering and laying concrete and compacting by using vibrators watering, curing for 28 days, centring & shuttering and finishing the exposed surface smooth providing grooves or beads where necessary in all floors including cost, conveyance, royalties and taxes of all materials , cost of all labour with cost of all T&P required for the work etc. complete in all respect but excluding cost and conveyance of M.S. rods or steel & binding wires and labour charges for strengthening, cutting, bending grills and placing in proper position etc complete as per direction of Engineer-in-Charge.Column Footing |
| 13 | Column Ground Floor |
| 14 | Column First Floor |
| 15 | Column Second Floor |
| 16 | Plinth Beam |
| 17 | LintelGround Floor |
| 18 | LintelFirst Floor |
| 19 | LintelSecond Floor |
| 20 | Roof Beam Ground Floor |
| 21 | Roof Beam First Floor |
| 22 | Roof Beam Second Floor |
| 23 | Roof Slab Ground Floor |
| 24 | Roof Slab First Floor |
| 25 | Roof Slab Second Floor |
| 26 | Stair Case Ground Floor |
| 27 | Stair Case First Floor |
| 28 | Chajja Ground Floor |
| 29 | Chajja First Floor |
| 30 | Shelves Ground Floor |
| 31 | Shelves First Floor |
| 32 | Fins Ground Floor |
| 33 | Fins First Floor |
| 34 | Straightening bent up coiled rods cutting, bending, cracking, hooking, welding to jointing if required the M.S rod or tor steel of SAIL Brand and tying the grills hoisting lowering and placing in proper position as required for R.C.C works with cost conveyance and taxes of M.S rods or tor steeland binding wires of 18 to 20 gauge and labour with all T&P required for the work etc. complete in all floors weight of binding wires will not be considered for payment and payment will be made on weight of M.S Rods or Tor steel only) Ground Floor |
| 35 | First Floor |
| 36 | Second Floor |
| 37 | 16mm.thick cement plaster (1:6) finished smooth to inside surface of 9” thick brick walls/ stone masonary after racking out joints including watering and curing for 7 days with cost, conveyance of all materials and labour, T&P required for the work with all taxes and royalities, Cess etc.complete in all respects inas per specification and direction of Engineer-in-Charge. Ground Floor |
| 38 | First Floor |
| 39 | Second Floor |
| 40 | 12mm thick cement plaster (1:6) finished smooth to cement punningincludingracking out joints including watering and curing for 7 days with cost, conveyance, royalities, Cess and taxes of all materials and labour, T&P required for the work with all taxes and royalities etc.complete in all respect inas per specification and direction of Engineer-in-ChargeGround Floor |
| 41 | First Floor |
| 42 | Second Floor |
| 43 | 6mmthick cement plaster (1:4) finished smooth over RCC work after racking out joints including watering and curing for 7 days with cost, conveyance, royalities, Cess and taxes of all materials and labour, T&P required for the work with all taxes and royalities etc.complete in all respect inas per specification and direction of Engineer-in-Charge. Ground Floor |
| 44 | First Floor |
| 45 | Second Floor |
| 46 | 20mm. thick cement plaster (1:6) finished smooth to inside surface of 9\" thick brick walls/ stone masonary after racking out joints including watering and curing for 7 days with cost, conveyance of all materials and labour, T&P required for the work with all taxes and royalities, Cess etc.complete in all respects inas per specification and direction of Engineer-in-Charge. |
| 47 | 2.5 cm thick Grading Concrete over roof slab with cement concrete (1:2:2) using 6mmsize black hard granite crusher broken chips and screened & washed sharp sand for mortar and finished smooth to the rough surface of slab including watering and curing with cost, conveyance, royaltiesof all materials with cost of all labour, and T&P required for the work etc. complete in all respect as directed by the Engineer in charge.Ground Floor |
| 48 | First Floor |
| 49 | Second Floor |
| 50 | Supplying,fitting and fixing in position well dressed and well seasoned sal wood work framed and fixed (wrought and put up)in choukaths for doors,windows and ventilators with cost ,conveyance,royalties and of all materials with all labour T&P etc. required for the work complete in all respect as per direction of Engineer-in-Charge. Ground Floor |
| 51 | First Floor |
| 52 | Second Floor |
| 53 | Supplying fitting fixing 30mm thick flush door both sides skin modulded alkyd backer at the back and the size of out frame being of 33x57mm. Accessories / gaskets are to be used per the manufactures supply and specification like handle, lock and floor spring of approved quality including locking arrangement including all fitting, cost of all materials, taxes, labour, T&P etc complete.Ground Floor |
| 54 | First Floor |
| 55 | Supplying and fixing of Unplasticised Poly Vinyl Chloride (UPVC) (FENESTA / casement doors-60 series duly manufactured using UPVC reinforced profiles of 60mmx 56mm x 2.25 mm for outer frames, 102 mm x 60mmx 2.25mm for casement Door Sash Profile and 74mm x 60 mm x 2.5 mm mlullion profile capable of mounting single glazing system,structurally reinforced with hot dip galvanized upto 50 microns of minimum thickness of 2.0 mm prefabricated and welded through fusion welding the Door sash shall be fitted with 12mm thick WPC board of greenply make duly fixed withEPDM weathering seal resistance and accessories like closing looking system made of aluminum 1 No per set of sashed and the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing / deglazing at site etc.including cost and consveyance of all materials accessories labour charges, materialsn and product conforming to ASTM D 638-14, EN-477-95 and other applicable codes and standards as per specification and direction of Engineer-in-Charge. Ground Floor |
| 56 | First Floor |
| 57 | Supplying and fixing of Unplasticised Poly Vinyl Chloride (UPVC) (FENESTA / casement window-60 series duly manufactured using UPVC reinforced profiles of 60mmx 56mm x 2.25 mm for outer frames, 102 mm x 60mmx 2.25mm for casement Door Sash Profile and 74mm x 60 mm x 2.5 mm mlullion profile capable of mounting single glazing system,structurally reinforced with hot dip galvanized upto 50 microns of minimum thickness of 2.0 mm prefabricated and welded through fusion welding the Door sash shall be fitted with 12mm thick WPC board of greenply make duly fixed withEPDM weathering seal resistance and accessories like closing looking system made of aluminum 1 No per set of sashed and the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing / deglazing at site etc.including cost and consveyance of all materials accessories labour charges, materialsn and product conforming to ASTM D 638-14, EN-477-95 and other applicable codes and standards as per specification and direction of Engineer-in-Charge. Ground Floor |
| 58 | First Floor |
| 59 | First Floor |
| 60 | Supllying,fitting,fixing glass louvers in position in M.S.steel window frames & cutting groovesincluding cost of glassincluding cost of material, cost, conveyance, royalties of all materials, labour with T&P etc. complete in all respect as directed by the Engineer-in-charge. Ground Floor |
| 61 | First Floor |
| 62 | Providing fitting & fixing of 30mm Flush door with single shutter made of Ply wood with all fitting like door closer ddoor stopper alluminium door hingesfriction stay alluminium screews handle with lock (Brass) with all labours & cost of all materials etc complete. Ground Floor |
| 63 | Second Floor |
| 64 | Supplying,in all floors of M.S. grills, grill gates, M.S. gates, garage door, collapsible gates with top and bottom rails, steel windows, critical frames for windows, stair case and parapet railing made out of M.S Square bar of 10mm including painting two coats over a coat of redoxide primer as per approved drawing and designwith cost of all materials & labour, T&P, sundries etc. complete in all respect as per specification & direction of the Engineer-in-Charge. .Ground Floor |
| 65 | First Floor |
| 66 | Second Floor |
| 67 | Labour charges for fittingand fixing in position of M.SGates/door & window frame including mending or cutting size or grooves and drillingholes in choukaths with cost and conveyance of all materials and labour with T&P required for with work, cess, royalites etc.complete (including cost of screws ) inas per specification and direction of Engineer-in-Charge.Ground Floor |
| 68 | First Floor |
| 69 | Second Floor |
| 70 | Supplying, fitting and fixing W.I. Clamps of 33 cm to 38 cm long of 35mm x 5mm size to doors and windows and ventilators including fixingin CC (1:3:6) using 12mm to 20mm Hard black crusher broken chips with cost, conveyance, taxes of all materials with all materials and labour with T&P etc. complete as per direction of Engineer-in-Charge. Ground Floor |
| 71 | First Floor |
| 72 | Second Floor |
| 73 | Supplying, fitting and fixing vetrified tiles of premium grade having thickness 8mm to 10mm confirming to IS 13756 of size 600mm x 600mm Colour / printed series (Homogenous) of approved make in floors on 20mm thick bed of C.M. (1:4) (1 cement : 4 course sand) and filling the joint with white cement mixed with pigment to match the shades of the tile including cost of all materials, taxes, labour, cess, T&P etc. required for the work complete in all respect as directed by the Engineer in charge. Ground Floor |
| 74 | First Floor |
| 75 | Supplying, fitting, fixing of Vitrified Floor tiles in floors, treads on steps and landing on25 mm thick bed of cement mortar (1:1) jointed with cement slurry mixed with pigments to match the shade of the tiles, including rubbing & polishing etc. complete including cost, conveyance, taxes, Cess & royalities of all materials, labour with T&P complete in all respectGround Floor |
| 76 | First Floor |
| 77 | Supplying fitting, fixing of Vetfified tile in Dado of approved make on 12 mm of thick bed of cement mortar (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing etc. complete with cost, conveyance, royalties and taxes of all materials with all labour, T&P etc complete in all respects and as per direction of Engineer-in-Charge. |
| 78 | First Floor |
| 79 | Fixing of Granite tiles above 0.10 sqm (Above 0.40 sqm) of10mm thick of premium grade of size (above 0.1 sqm & upto 0.40 Sqm) in floors,trades or steps and landing on 25mm thick bed oif coment mortar (1:1) jointed with cement slurry mixed with pigments to match the shade of the tiles, including rubbing & polishing etc. complete including cost, conveyance, taxes & royalties of all materials, labour with T&P complete in all respect. |
| 80 | Fixing of Chequered tile (300mm x300mm) in floors, trades of steps & landing over 25mm thick bed of cement mortar (1:1) jointed with cement slurry mixed with pigments to match the shade of the tiles including rubbing and polishing etc. complete including cost, conveyance, taxes & royalities of all materials, labour with T&P etc. complete. |
| 81 | Providing and laying 80mm thick factory made cement concrete interlocking paver block of M-30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 20 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. |
| 82 | Supplying, fitting, fixing of stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustard of size 32mm x 32mm x 2 mm @0.09 mtr C/C and stain lell square pipe bracing of size 32mm x 32mm x 2mm in 3 row in stair case as per approved design etc. with cost of all material taxes, labour T&P etc. complete.Ground Floor |
| 83 | First Floor |
| 84 | Providing and finishing twocoats of Synthetic ENAMEL PAINT of approved manufacture and shade to wood and steel faces applied evenly to given and uniform finish as APPROVED. Allow for preparation of surface and a coat of appropriate PRIMER. including cost of paint, primer,conveyance, royality, taxes labour and T & P required completeGround Floor |
| 85 | First Floor |
| 86 | Second Floor |
| 87 | Priming one coat with wall primer water bond cement primer of approved shade including cost of all materials and labour, cesswith T&P etc. complete in all respectas per specification and direction of Engineer-in-Charge. Ground Floor |
| 88 | First Floor |
| 89 | Second Floor |
| 90 | Finishing plastered surfaces with Wall putty (water based) of approved make and finishing the surface smooth and even by sand papering to receive paint in walls, at all heights with staging wherever necessary with cost, conveyance, taxes of all materials, cost of all labour, all T&P etc. required for the work complete in all respect as per the direction of the Engineer-in-charge.Ground Floor |
| 91 | First Floor |
| 92 | Second Floor |
| 93 | Painting2 (two) coats with weather coatover coat of primer of approved shade and approved make to give an even shade after scrapping old paint with scrapper, washing with soda water, priming with approved new primerincluding cost of all material, taxes, of all materials and labour with T&P etc. complete as per direction of Engineer-in-Charge.Ground Floor |
| 94 | First Floor |
| 95 | Second Floor |
| 96 | Providing inside walls, ceiling etc. with plastic emulsion paintover a coat of primer,including finishing the surface smooth withcement putty including cost of paint, primer, Putty conveyance, royality, taxes labour etc Ground Floor |
| 97 | First Floor |
| 98 | Second Floor |
| 99 | Compound wall :Earth work in excavation of foundation in Hard soil including dressing of sides and levelling the bed up to the required depth and depositing the excavated materials away from the work site within 50m initial lead & 1.5m initial lifts with sundries & T&P required for the work complete as directed by the Engineer in charge. |
| 100 | Supplying & filling in foundation & plinth with sand in 23.5cm(9”) thick layers including watering & ramming with cost, conveyance, royalties taxes the materials & labour with T&P required for the work etc.,complete as per direction of Engineer-in-Charge. |
| 101 | Cement concrete of proportion (1:4:8) in foundation and floors using 4cm size hard black crusher broken granite chips of approved quality and from approved quarry including hoisting, lowering and laying concrete, watering and curing for four weeks with cost, conveyance, taxes and royalities of all materials with labour, T&P etc. complete as per approved specification & direction of the Engineer-In-Charge. |
| 102 | Flyash Brick masonry in C.M. (1:6) using 9\" size in Foundation & Plinth using of 23cmx11cmx8cm size brick having a crushing strength of not less than 75 kg per Sq.cm including splays, cuttings, circular moldings, watering & curing for 7 days, cost, conveyance, royalties of all materials, labour with T&P etc. complete in all respect as directed by the Engineer-in-charge. |
| 103 | Flyash Brick masonry in C.M. (1:6) using 9\" size in Superstructure using of 23cmx11cmx8cm size brick having a crushing strength of not less than 75 kg per Sq.cm including splays, cuttings, circular moldings, watering & curing for 7 days, cost, conveyance, royalties of all materials, labour with T&P etc. complete in all respect as directed by the Engineer-in-charge. |
| 104 | R.C.C. work of M-20 grade having minimum compressive strength in work test of 200 Kg/Cm2 at 28 days using20 mm and down graded size black hard crusher broken granite stone chips of approved quality and from approved quarry including hoisting lowering and laying concrete and compacting by using vibrators watering, curing for 28 days, centring & shuttering and finishing the exposed surface smooth providing grooves or beads where necessary in all floors including cost, conveyance, royalties and taxes of all materials , cost of all labour with cost of all T&P required for the work etc. complete in all respect but excluding cost and conveyance of M.S. rods or steel & binding wires and labour charges for strengthening, cutting, bending grills and placing in proper position etc complete as per direction of Engineer-in-Charge.Column Base |
| 105 | Column |
| 106 | Plinth Beam |
| 107 | Beam |
| 108 | Straightening bent up coiled rods cutting, bending, cracking, hooking, welding to jointing if required the M.S rod or tor steel of SAIL Brand and tying the grills hoisting lowering and placing in proper position as required for R.C.C works with cost conveyance and taxes of M.S rods or tor steeland binding wires of 18 to 20 gauge and labour with all T&P required for the work etc. complete in all floors weight of binding wires will not be considered for payment and payment will be made on weight of M.S Rods or Tor steel only) |
| 109 | 16mm.thick cement plaster (1:6) finished smooth to inside surface of 9” thick brick walls/ stone masonary after racking out joints including watering and curing for 7 days with cost, conveyance of all materials and labour, T&P required for the work with all taxes and royalities, Cess etc.complete in all respects inas per specification and direction of Engineer-in-Charge. |
| 110 | 12mm thick cement plaster (1:6) finished smooth to cement punningincludingracking out joints including watering and curing for 7 days with cost, conveyance, royalities, Cess and taxes of all materials and labour, T&P required for the work with all taxes and royalities etc.complete in all respect inas per specification and direction of Engineer-in-Charge |
| 111 | Priming one coat with wall primer water bond cement primer of approved shade including cost of all materials and labour, cesswith T&P etc. complete in all respectas per specification and direction of Engineer-in-Charge. |
| 112 | Painting2 (two) coats with weather coatover coat of primer of approved shade and approved make to give an even shade after scrapping old paint with scrapper, washing with soda water, priming with approved new primerincluding cost of all material, taxes, of all materials and labour with T&P etc. complete as per direction of Engineer-in-Charge. |
| 113 | Supplying of MS Gates / Window Grillsto the required sizes and specification of approved design as directed by the Officer-in-charge including cost, conveyance, of all materials with all labour and T&P required for the work etc. complete as per specification and direction of Engineer-in-Charge. |
| 114 | Providing and finishing twocoats of Synthetic ENAMEL PAINT of approved manufacture and shade to wood and steel faces applied evenly to given and uniform finish as APPROVED. Allow for preparation of surface and a coat of appropriate PRIMER. including cost of paint, primer,conveyance, royality, taxes labour and T & P required complete |
| 115 | APPROACH C.C. ROAD :Earth work in excavation of foundation in Hard soil including dressing of sides and levelling the bed up to the required depth and depositing the excavated materials away from the work site within 50m initial lead & 1.5m initial lifts with sundries & T&P required for the work complete as directed by the Engineer in charge. |
| 116 | Supplying & filling in foundation & plinth with sand in 23.5cm(9”) thick layers including watering & ramming with cost, conveyance, royalties taxes the materials & labour with T&P required for the work etc.,complete as per direction of Engineer-in-Charge. |
| 117 | Cement Concrete of prop (1:3:6) in F&P using 4cm size HG metalsof approved quality and from approved quarry including hoisting lowering and laying concrete in layers not exceeding 15 cm (6”) thick to the required level ramming, watering and curing etc. complete including cost and conveyance of all materials with all taxes and royalities and all labour with T&P required for the work etc. complete, including dewatering if required as per direction of Engineer-in-Charge. |
| 118 | Cement Concrete of Prop (1:2:4) using 12 mm size h.g. chips of approved quality and from approved quarry including hoisting lowering and laying concrete, watering and curing for four weeks with cost, conveyance, taxes and royalities of all materials with all labour and T&P required for the work etc. complete in all respect in all floors as per the direction of the Engineer-in-charge. |
| 119 | Providing,fitting and fixing in position 25mm thick compressible bituminous board in expansion joint (ISI) for finished item of workas perSection 900 & 2600 of MoRT&H Specifications for Road & Bridge works (5th Revision) and as per direction of Engineer-in-Charge. |
| 120 | Construction of embankment with earth obtained from borrow pits by mechanical means as per approved drawing and technical specifications as per Clause 305 of MoSRT&H specifications for Road & Bridge works (Latest Revision). |
| 121 | E.I Work :-Recessed wiring to light point/Fan point/ Exhaust fan point/Call bell point with 1.5sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20mm dia non-metallic PVC flexible conduit with 6Amp ,250V Modular switch ISI marked and ceiling rose ISI marked mounted on Metal box having front Modular cover of suitable size, Metal box with 1.5sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection (Make of wire-Finolex/L&T/Anchor/Havells/V-Guard/KEI/RHINO/C&S)Group-A-L.P- 40 F.P-4 C.B.P- |
| 122 | Group-B L.P- 23F.P- 12C.B.P- |
| 123 | Group-CL.P- 9F.P- C.B.P-2 |
| 124 | Supply and fixing of 6Amp plugwith 6Amp switch on existing board (Modulartype ) |
| 125 | Supply and fixing of Modularmetal box on surface or in recess with suitable size of Modular coverin front including providing and fixing of6Amp and6Amp Modular switches connection(make-Anchor/ Legrand /Roma) |
| 126 | Supply and fixing of Modularmetal box on surface or in recess with suitable size of Modular coverin front including providing and fixing of 6pin 6Amp& 16Amp socket outlet and16Amp Modular switches connection(make-Anchor/ Legrand /Roma) |
| 127 | Supply and fixing of Modularfan regulator(Cona/ Anchor/ Usha/Bajaj)Electronics step type Regulator (Modular type) |
| 128 | S/F of Multipurposeboard consisting 4nos. 6Amp plug and switchModular on metal box and Modular cover with all connections |
| 129 | Recessed submain wiring alongwith earth wire with the following sizes of PVC insulated single core multistrand copper conductor ISI marked conforming to IS-694/1990 in 20mm dia non metallic heavy duty flexible conduit 1.6 mm in surface /recessed PVC conduit as required (make of wire -Finolex/Polycab/L&T/Anchor/Havells/V-Guard/KEI/RHINO) 2 X 1.5sq.mm +1 X 1.5sqmm |
| 130 | 2 X 2.5sq.mm +1 X 1.5sqmm |
| 131 | 2 X 4sq.mm +1 X 1.5sqmm. |
| 132 | 2 X 6sq.mm +1 X 2.5sqmm. |
| 133 | Supply and fixing of superior type call bell of ISI marked, on 6\" X4\"conforming to IS-2268/1994 and bell push of ISI marked , conforming to IS-1293/1988 (make-Cona/Anchor)(Ding Dong) call bell . |
| 134 | S/F of Bakelite angle holder/batten holder of ISI marked conforming to IS-1258/1987 in place of ceiling rose . |
| 135 | Supply and fixing of copper plate earthing( 600 X 600 X 3.15mm )with running copper flat 25 X 5mm from copper plate to funnel of40mm dia G.I pipe including all accessories |
| 136 | S/L of 8 SWG Copper wire |
| 137 | Supply and fixing of following way single pole and neutral sheet steel MCB distribution board 250V on surface/recess complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required (but with out MCB/ RCCB/ Isolator) make-HPL/ Havells/ Legrand /L&T/C&S.)8way, Double door |
| 138 | Supply and fixing of 5Amp to 32A rating 240V \"B\" series MCB suitable for lighting and other loads of the following poles in the exiting MCB DB ISI marked complete with connections testing and commissioning etc. as required.(make-HPL/ Havells/ Legrand /L&T/C&S)Single pole (SP) |
| 139 | S/F of 32Amp DP MCB Hager/Legrand/C&S make including box |
| 140 | Supply and fixing ofporcelain base kit kat 415V (Anchor/Havells) 63Amp kit kat |
| 141 | Supply ,installation, testing and commissioning of main switches (IS 13940 part-3/1993 ) of following capacity on existing surface/wall mounting and completer with HRC fuse links, interconnections, earthing etc. as required(Make-Seimens/ HPL/ Anchor/ L&T/Havells/C&S/RK) 63Amp ICDP main switches with MS board |
| 142 | Supplyand fixing of 9Watt LED lamp (Philips/ Havells/ AnchorBajaj) |
| 143 | S/F of 20W 4\"LED fitting Surface LED Light fitting (Make-Havels/Philips/Bajaj/Crompton/Helonix) |
| 144 | S/F of 36W 2\"X2\" Surface/recessed on Ceiling LED fitting (Make-Havels/Philips/Bajaj/Crompton/Helonix) |
| 145 | S/F of 18W 1\"X1\" Surface/recessed on Ceiling LED fitting (Make-Havels/Philips/Bajaj/Crompton/Helonix) |
| 146 | S/F of 3Watt/2Watt Circular Surface down light LED fitting (Make-Havels/Philips/Bajaj/Crompton/Helonix) |
| 147 | S/F of 12Watt Circular Surface down lightLED fitting (Make-Havels/Philips/Bajaj/Crompton/Helonix) |
| 148 | Bed Lamp |
| 149 | S/F of 90W LED street light fitting (Make-Havels/Philips/Bajaj/ Crompton/Helonix) |
| 150 | LED Strip Light ( Make-Crompoton/Phillips/Helonix) |
| 151 | Strip Light Driver |
| 152 | S/F of G.I. Street light Bracket with M.S. Clamp |
| 153 | Gate/ Lawn light fitting with1 X 18watt CFL lamp 12\" size dia Make-Bajaj/ Philips / Crompton/ PAC/ OASIS/Helonix) |
| 154 | S/F LED Garden light fitting (Make-Crompton/Helonix) (Model No- LBLSR-10-WW) |
| 155 | Lawn light pindi size (1\" X 1\" X 2 1/2\" )with4\" steel pipe and C.C masonary |
| 156 | S/F of Geyser(15ltr) Crompton make |
| 157 | Supply and fixing of fan (make-Usha/Orient/V-Guard/Khaitan/Havells/Crompton/Almonard/V-Guard) S/F of 1200mm High speed Ceiling fan, Heavy Duty,durable, copper winding,Aluminium blade(ISI mark)Crompton Grave/Khaitan/Orient/Polycab/Bajaj/V-Guard |
| 158 | Exhaust fan 300mm |
| 159 | Wall mounted fan 400mm |
| 160 | Supply of PVC/XLPE Aluminium armored cables ISI marked.(Make- Glowstar/ Polycab/Nicco/KEI/RHINO as per letter No-309 19.1.2011 of SEEC (R&B) Odisha)6sq.mm 2core |
| 161 | Cable laying onwall surfacewithsteel shaddle 25sqmm |
| 162 | S/Fof B.H fitting CFL type complete (Bajaj/Philips with lamp |
| 163 | S/F of PVC T/C U.Balmn. Wire with No.10/12SWG G.I supporting wire6mm2 Almn. Wire |
| 164 | Supply and fixing of Modular switch ,Socket , T.V Socketand Telephone socketetc. 16Amp socket.(Modular type ) |
| 165 | Supply and fixing of A.C machine (Carrier/LG/Hitach) S/F of 1.5ton Split Type A.C machine (3 star make) |
| 166 | S/F of 4KVA voltage stabiliser (CG/Shakti/V-guard/Autotac)(I/p-130V to 270V, O/P-200V to 240V) |
| 167 | Installation charges of AC machine |
| 168 | Supply and fixing of Stand for AC Machine |
| 169 | S/F of Copper Pipe 5/8\" to 1/4\" |
| 170 | S/F of 3 core wire for AC machine |
| 171 | S/F of Drain Pipe |
| 172 | Supply of Invertor,UPS 1600VA Pure Shine wave (Make Microtech/Su-kam/Luminous/Crompton) |
| 173 | Supply of Invertor Battery 12V 150AH(Make Exide/Amrom/Su-kam/Luminous/Crompton with 48 Month warranty) |
| 174 | Supply of Invertor Stand(Make Microtech/Su-kam/Luminous/) |
| 175 | GPH WORK:-Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor CPVC/GIpipesconforming to ASTM-D-1785/89 (Sch-80) and pipe fittings of the following nominal bore with clamps including making good the wall, ceilingand floor all complete as per specification and direction of the Engineer in charge In Ground Floor20mm dia CPVCpipe |
| 176 | 25mm dia CPVCpipe |
| 177 | In First Floor20mm dia CPVCpipe |
| 178 | 25mm dia CPVCpipe |
| 179 | In Second Floor25mm dia CPVCpipe |
| 180 | 32mm dia CPVCpipe |
| 181 | Supplying all materials, labour, T&P and cutting hole in brick of stone masonry wall for taking GI pipes and fittings etc and repairing the holes after insertion of pipes etc with cement concrete (1:2:4) including finishing complete so as to make it leak proof as per direction of theEngineer in charge. In Ground Floor |
| 182 | In First Floor |
| 183 | Supplying allmaterials, labour, T&P and cutting grooves in pucca floors and walls for takingGI/ PVC pipes and making good the damages as per the direction of the Engineer in charge. In ground floor |
| 184 | Supplying all materials, labour, T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all jointing materials complete as per specification and direction of the Engineer in charge 15 mm dia CPLB Bib cock (Jaquar)CON-CHR-107KN |
| 185 | 15mm dia CP angle stop cock(Jaquar)CON-CHR-053KN |
| 186 | 15mm CP Concealed Stop Cock(Jaquar)CON-CHR-083KN |
| 187 | 15 mm dia CP two way Bib cock(Jaquar)CON-CHR-041KN |
| 188 | 15mm CP Health faucet(Jaquar)ALD-CHR-573 |
| 189 | 15mm dia CP flange |
| 190 | 15mm dia CP extension piece |
| 191 | 25mm dia brass or gun metal fullway valve(Shakti Make) |
| 192 | 32mm dia brass or gun metal fullway valve(Shakti Make) |
| 193 | 15mm dia CP Wall Mixture(Jaquar)CON-CHR-217KN |
| 194 | 15mm dia CP Revolving shower(Jaquar)OHS-CHR-1989+SHA-CHR-477 |
| 195 | 15mm dia CP Revolving shower |
| 196 | Supplying all materials,labour,T&P and fixing Rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS : 12701-1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc, including hoisting upto a height of 5 metres above ground level and placing the tank to the required position and providing 1st class K.B brickwork in cement mortar (1:6) of 0.46m height in staging and in circular protection wall to support the tank, 12mm thick cement plaster (1:6) over brickwork, R.C.C slab of size 1.60mx1.60m and 0.10m thick, R.C.C beam of 0.25mx0.30m and 2.60m average length in cement concrete(1:2:4) using 12mm size h.g chips including centering and shuttering,watering, curing, conveyance of all materials to worksite etc all complete as per specification and direction of the Engineer in charge2000litre capacity water storage tanks (Sintex/Supreme/Oriplast)(over the roof of 2nd. Floor) |
| 197 | Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No. 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricantby non-heat application method/as per manufacturer’s specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches as per specification and direction of the Engineer in charge110mm dia U-PVC SWR pipe(Supreme/Ashirvad) |
| 198 | 110mm U-PVC Door TeE |
| 199 | 110mm U-PVC Door Bend |
| 200 | 110mm dia U-PVC plain shoe bend |
| 201 | 110mm dia U-PVC cowl |
| 202 | 110mm dia U-PVC offset |
| 203 | 125mm Dia CP Grating |
| 204 | Supplying all materials, labour, T&P and cutting holes through existing brick or laterite masonry wall for taking HCI pipes and fittings including making good the damages etc all completeas per PH specification and direction of the Engineer in chargeIn Ground Floor (250mm to 375mmthick wall) |
| 205 | In First Floor (250mm to 375mmthick wall) |
| 206 | supplying all materials, labour, T&P and fitting and fixing 10 litres capacity low level flushing cistern with a pair of cast iron or M.S brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle, unions and couplings for connection with inlet, outlet and overflow pipes,32mm dia CP flush bend,15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connecting the inlet pipe with supply main etc all complete as per specification and direction of the Engineer in charge.10 litres capacity PVC LL cistern (Slimline-Deluxe-white-Parryware/Sanituf) |
| 207 | Supplying all materials , labour, T&P andfixing Vitreous chinawater closet ,squattingpan ( Indian type W.C. pan / Orissa pattern squatting pan ) duly embedded in cement concrete 1:5:10 using hard granite metal 4cm nominal sizeincluding fixing a pair of vitreous china 250mmx130mmx30mm foot rest, fixing 100mm dia hci \"P\" or \"S\" trap for water closet squatting pan including jointing the trap with pan in cement mortar (1:1), cutting the floor and mending good the damages etc. all complete as per P.H. specification and direction of Engineer-in-charge. 580mmx440mm size Orissa pan (Parryware/Hinware/Sanituf) |
| 208 | Supplying all materials, labour, T&P and fixing the following vitreous china Wash Down Water Closet(European type W.C pan) with integral ‘P’or ‘S’ trap to the floor with wooden plug and chromium plated pedestal screws including jointing the trap with soil pipe in cement mortar (1:1), fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers including polishing etc all complete as per specification and direction of the Engineer in chargeEuropean water closet with ‘P’ trap plain (Parryware/Hindware). |
| 209 | Single Piece European water closet(Hindware)92053 |
| 210 | Supplying all materials, labour, T&P and fixing wash basins with hole for pillar taps conforming to IS:2556-part-4-2004 with cast iron or M S brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered ‘Hot’ and ‘Cold’ with long screws, shanks and back nuts of 15mm dia nominal bore(Plaza make), fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste(Plaza make),etc all complete as per specification and direction of the Engineer in chargeSize 550mmx460mm Basin with porcelain pedestral |
| 211 | Table top Basin(Hindware)91067 |
| 212 | Supplying all materials, labour, T&P and fixing mirror of superior glass conforming to IS:3438-1996 mounted on 6mm thick A.C sheet or plywood sheet and fixed to wooden plugs with CP screws and washers complete as per specification an direction of the Engineer in charge Design Mirror |
| 213 | Supplying all materials,labour,T&P and fixing standard sized Glass-shelf with C.P brass bracket and guard rail complete fixed to wooden pluges with screw etc.all complete as per specification and direction of Engineer-in-charge. 600mmx460mmx200mm size glass shelf(Jaquar )CAN-CHR-1171N |
| 214 | 600mmx125mm size glass shelf with C.P gruard rail |
| 215 | Supplying all materials, labour, T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in chargeCP towel rail |
| 216 | CP towel rail (Jaquar)CAN-CHR-1101N |
| 217 | CP towel ring (Jaquar)AHS-CHR-1551 |
| 218 | Supplying all materials, labour, T&P and fixing CP Soap Holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge CP Soap Case |
| 219 | CP Soap Dish holder (Jaquar)CAN-CHR-1131N |
| 220 | Supplying all materials, labour, T&P and providing Vetrified mat finishtiles in floors, treads and landing on 25mm thick bed of cement mortar 1:1 (1 cement:1 sand) joined with neat cement slurry mixed with pigment to match the shades of the tiles etc all complete as per direction of the Engineer in charge(Ceramic tile size 600cmx600cm of Kajaria-Fogparla or equivalent make to pre-approved by the Engineer-in-charge)Ground floor |
| 221 | In First Floor |
| 222 | Supplying all materials, labour, T&P and fixing porcelain glazed tiles in dados skirting on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to match the shades of the tiles including rubbing and polishing complete as per direction of the Engineer in charge(wall tile size 450mmx300mm of Kajaria/Somany/Johnson/Orient bell to pre-approved by the Engineer-in-charge)In Ground Floor |
| 223 | In First Floor |
| 224 | Supplying all materials, labour, T&P and fixing granitge tiles in dados skirting on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to match the shades of the tiles including rubbing and polishing complete as per direction of the Engineer in charge |
| 225 | Supplying all materials, labour, T&P and providing cement concrete (1:4:8) with 4cm size hard granite metal including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in chargeGround floor |
| 226 | Supplying all materials, labour, T&P and providing cement concrete (1:2:4) with 12mm size hard broken granite chips including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge Ground floor |
| 227 | In first floor |
| 228 | Supplying all materials, labour, T&P and providing 12mm thick cement plaster (1:4) on brickwork including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge In ground floor |
| 229 | In first floor |
| 230 | Supplying all materials, labour, T&P and constructing gully trap chamber of the following inside size with 8cm thick R.C.C precast cover slab in cement concrete (1:2:4) mix using 12mm size h.g chips, foundation concrete (1:4:8) using 40mm size hard granite metal on bed and around trap, KB brickwork in cement mortar (1:6) in F&P and inside 12mm thick cement plastering (1:3) finished with a floating coat of neat cement including fixing 100mmx100mm size HCI gully trap,150mmx150mm size CI grating etc all complete as per approved drawing, specification and direction of the Engineer in charge Inside size 250mmx250mm |
| 231 | Supplying all materials, labour, T&P and constructing inspection chamber of the following sizewith cement concrete(1:3:6) using 40mm size hard granite metal on bed, 1st class KB brickwork in cement mortar(1:6), moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size h.g chips, 12mmthick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, RCC cover slab in (1:2:4) using 12mm size h.g chips with RCC man hole cover, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in chargeInside size 760mmx760mmx460mm |
| 232 | Supplying all materials, labour, T&P and constructing man hole chamber of the following sizewith cement concrete(1:3:6) using 40mm size hard granite metal on bed, 1st class K.B brickwork in cement mortar(1:6), moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size h.g chips,12mmthick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab in (1:2:4) using 12mm size h.g chips with RCC man hole cover, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge Man hole chamber Inside size 910mmx910mmx910mm |
| 233 | Supplying all materials, labour, T&P and constructing soakway pit of the following size with dry brick walling from bottom upto invert of inlet pipe and 1st class K.B brickwork in cement mortar (1:6) for the remaining height at top, cement concrete (1:4:8) using 40mm size hg chips on bed, 12mm thick cement plaster (1:4) inside and outside over masonry brickwork, gravel backing in the rear of well steining, RCC cover slab in cement concrete (1:2:4) using 12mm size hg chips fitted with iron lifting handles including earthwork in open well excavation in all kinds of soil and refilling of cavity around the pit & painting the iron works, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in chargeBrick masonry soakway pit 1.20m dia x 2.00m deep |
| 234 | Supplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized PVC pipes conforming to IS: 4985/2000 of the following outside dia for class–3 (0.60mpa) including jointing with supply of approved solvent cement by non-heat application method/as per manufacturer’s specification, providing and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the Type C-1 standard bedding surrounding or encasingincluding concrete for bedding and curing etc all complete as per PH specification and direction of the Engineer in charge.110mm dia u-pvc pipe alround concrete |
| 235 | 160mm dia u-pvc pipe alround concrete |
| 236 | Construction 1 nos 30 users RCC Septic tankEarth work in excavation of foundation in all kinds of soil within 50m initial lead and 1.5m initial lift including rough dressing & breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m in depth and as per direction of theEngineer-in-Charge. |
| 237 | - do - with addl. Depth of 1.5 m |
| 238 | Supplying all materials,labour ,T&P and filling in foundation and plinth with sand well watered and rammed including cost, conveyance of all materials to work site ,payment of royalty,taxes etc. all complete as per direction of the Engineer-in -charge In ground floor |
| 239 | Supplying all materials, labour, T&P andproviding cement concrete ( 1:4:8 ) with 4cm size crusher broken hard granite metal including watering, curing, cost of all materials,conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge.In ground floor |
| 240 | Supplying all materials, labour, T&P and providing cement concrete (1:1:5:3) with 12mm size hard broken granite chips for R.C.C works including hoisting, laying, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge |
| 241 | Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for R.C.C works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge For Roof slab |
| 242 | For RCC wall |
| 243 | Supplying all materials, labour, T&P and providing M.Sreinforcement for R.C.C work including cutting, bending, binding, and tying the grills and placing in position including cost of binding wire 18 to 20 gauge, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in chargeIn ground floor |
| 244 | Supplying all materials,labour,T&P and providing 6mm CP (1:4) with cement punning on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,paymentof royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge. |
| 245 | Supplying all materials, labour, T&P and providing,fitting and fixing 100mm x 100mm x 100mm SW Tee in wall including filling the recess with cement concrete (1:3:6) with 12mm size h.g chips all complete including watering, curing, conveyance of all materials to worksite, payment of royalty all complete as per specification anddirection of the Engineer in charge110mm dia UPVC Tee |
| 246 | Supplying all materials, labour, T&P and making MS step iron in 20mm diameter MS steel bars and fixing into walls ofman hole/septic tank duly embedded in cement concrete (1:3:6) complete as per specification and direction of the Engineer in charge. |
| 247 | Supplying all materials, labour,T&P and providing Vent base in cement concrete(1:2:4) with 12mm size hard broken granite chips for R.C.C works including hoisting, laying, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge |
| 248 | Supplying all materials, labour, T&P and fitting and fixing UPVC SWRsoil waste ventilating pipes and fittings to walls with nails, bobbins and wooden plugs or laying in trenches including earthwork in excavation in all kinds of soil and refilling of trenches as per specification and direction of the engineer in charge. 110mm diameter U-PVC SWR pipe |
| 249 | 110mm dia U-PVC Plain shoe bend |
| 250 | 110mm dia U-PVC Cowl |
| 251 | Filling in foundation and plinth with excavated materials, moorum including watering and ramming as directed by the Engineer in charge |
| 252 | 200mmx150mm Large Tube Well through DTH method.- 1 NosLabour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level through consolidated and unconsolidated rock with down the hole hammer drilling rig or combination rig as required to suit the site condition as per the direction of the Engineer in charge including use of own rig with its accessories, tools and plant and consumables etc for lowering of 200mm/150mm dia G.I/P.V.C/M.S casing pipes for housing fitted with socket and with or without well screen as per the necessity for soft, medium, hard and boulder formation(G.I/P.V.C/M.S casing pipes if required to prevent collapse of overburden is to be provided by the contractor including lowering and withdrawing after completion of the tube well), 200mm dia to 400mm dia in overburden portion including packing of gravel supplied by the contractor for 400mm dia bore onlyDrilling of 200mm dia bore 0mtr to 30mtr = |
| 253 | Drilling of 200mm dia bore 31mtr to 45mtr = |
| 254 | Drilling of 150mm dia bore 41mtr to 120mtr = |
| 255 | Lowering the following size of G.I/P.V.C/M.S housing pipes with or without slotted pipes as per the necessity from ground level up to 45.00m depth and fitted and fixed up in perfectly vertical position including cutting and threading of pipes and slotted pipes and supplying and fixing all jointing materials, tools and plant etc all complete and keeping the top of casing pipe threaded including plugging tube wells to prevent entry of foreign materials.Lowering of 200mm dia GI/P.V.C/MS casing pipes 0 mtr to 30 mtrs x2= |
| 256 | Lowering of 200mm dia GI/P.V.C/MS casing pipes 31 mtr to 45 mtrs x2= |
| 257 | Cost of 200mm dia P.V.C schedule-80 pipe = |
| 258 | Cleaning and developing the tube well with supply of compressor worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per direction of the Engineer in chargeBy DTH/Rotary Rig |
| 259 | Supplying all materials and labour,tools and plant and providing sanitary sealing by cement concrete grouting of annular space around GI/PVC/MS housing pipe upto 5 mtrs below ground level(as per drawing)to plug the bore hole excluding cost of cement all complete as per direction of the Engineer in charge. Minimum one metre of casing pipe to be inserted in the bore into the rock the bottom to ensure sanitary sealing(excluding cost of cement which willbe supplied by the Department).Sanitary sealing upto 5mtrs below ground level. |
| 260 | CC(1:2:4)with 12mm chips for grouting upto 5 mtr.Depth in sanitary sealing. |
| 261 | Supplying submerssible pump with sqirrel cage induction type submersible type submerssible electric motor to run on 3 phase/1 phase line voltage ranging from 320 volt to 450 volt conforming to IS: 8034 - 2002 with following specifications1 H.P three phase 3 stage head range 30 to 54 metres, discharge 155 to 110L.P.M with outlet dia of 32mm |
| 262 | DOL controll pannel |
| 263 | 2.50sqmm cable |
| 264 | 32mm dia steel short piece |
| 265 | Steel rope with cover |
| 266 | Well cap |
| 267 | 50mm size CI bracket |
| 268 | 25 mm PVC ASTM pipes |
| 269 | Labour charges for lowering of subersible pumpset with pipes and cables etc.with testing and commissioning at site. |
| 270 | Supplying all materials, labour, T&P and constructingBore well protectionchamber of the inside size 650x650x1000hightwith cement concrete (1:3:6) using 40mm size hard granite metal on foundation, 1st class Fly ashbrickwork in cement mortar (1:3), with base cement concrete (1:2:4) using 12mm size h.g chips,12mmthick cement plaster (1:4)inside and outside, R.C.C cover slab in (1:1.5:3) using 12mm size h.g chips, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge. Bore well protection chamber. |
AI Tender Summary
Tender Timeline
Aug 07, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedAug 16, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedAug 17, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender