Tender For Upgradation / Modernization Of Existing Parks / Green Belts.Sh: Augmentation Of Park With 4 Mtr. High Pole Alongwith Led Street Light Fittings & Led Post Top Lantern Gate Light Fitting With Other Allied Accessories At Sec 16B Park & Water Body , dwarka-Delhi

Upgradation / Modernization Of Existing Parks / Green Belts.Sh: Augmentation Of Park With 4 Mtr. High Pole Alongwith Led Street Light Fittings & Led Post Top Lantern Gate Light Fitting With Other Allied Accessories At Sec 16B Park & Water Body Dwarka. 1 Supplying, Fabrication And Installation Of 4 Mtr. High Pole Made Out Of 65 Mm Dia Nb, B Class G.I Pipe Isi Marked Duly Welded With Ms Base Plate Of Size 300 Mm X 300 Mm X 12 Mm Thick With Stiffner Of Size 130 Mm X 60 Mm X 5 Mm Thick , Supplying And Fixing Of Suitable Size Of Braket For Mounting The Light Fitting On The Pole, Suitable Earth Stud On Base Plate , Making Suitable Size Hole In Pole At A Height Of 2.5 Meter From Base Plate For Cable Entry / Exit ( As Per Drawing Approved By Engineer-In-Charge ) , Painting & Numbering Of Pole, Making Suitable Size Hole In Base Plate For Cable Entry / Exit Into The Pole And Fixing The Pole On The Existing Foundation With The Existing Nuts-Bolts, Washers Etc. Complete As Required. 2 Providing And Laying In Position 1:2:4 ( 1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate ) Reinforced Cement Concrete Foundation Of Size450 Mm X 450 Mm X 1200 Mm Deep ( 800 Mm Below Ground Level And 400 Mm Above Ground Level ) Including Excavation Of Earth, Refilling, Providing, Cutting, Bending And Placing In Position, Reinforcement Of Cold Twisted Bars Of 12Mm. Dia-1200Mm Long ( Approx ) 8Nos, And Reinforcement Ring Of Cold Twisted Bar Of 8Mm Dia -1400Mm Long ( Approx ) -6 Nos, ( With Suitable Spacing ) Including Centering & Shuttering As Required With Providing, Fixing And Positioning Of One Set Of Foundation Bolts Comprising Of 4 Nos., 16 Mm Dia, 750 Mm Long J-Type Ms Bolts ( Threaded Portion Shall Be Galvanized ) Along With 3 Nos. Gi Nuts And 2 Nos. Gi Washers Etc. Per Bolt And 1 No. Anchor Plate ( 3Mm Thick ) Of Suitable Size And Providing 63 Mm. ( O.D ) Dwc Pipe Isi Marked For Cable Entry & Exit Etc. Complete As Required. 3 Supplying, Replacement, Testing And Commissioning Of30 Watt Led Street Light Luminaire With Lens, Made Out Of Al.Pressure Die Cast Housing Enclosed With Toughened Glass, With Ip-66 Protection, Driver, All Accessories Including Providing Of Suitable Size Of Wire Mesh Protection Cover For Fitting, Connection Testing Etc Complete As Reqd. 4 Supplying, Installation, Testing And Commissioning Of 45 Watt Decorative Led Post Top Lantern Fitting Made Up Of Die Cast Aluminum Housing Offer Glare Freesymmetric Distribution Withpc Diffuser, Ip-65On The Existing G.I. Pole Etc Complete As Required. 5 Supply & Fixing Of Pole Connector Box Made Out Of Glass Reinforced Polyester Sheet Moulding Compound Conforming To Is:13410-1992 Grade S1 Of Outside Dimensions 280 Mm ( H ) X 170 Mm ( W ) X 115 Mm ( D ) ( All The Corners Of The Box Should Be Round & Not Pointed Ones ) Suitable To Mount On 40 / 50 / 65 Mm Dia Gi Pole With The Followingprovisions / Accessories Mounting In Box Complete As Reqd. ( I ) 2 Nos. Clamps Made Out Of 19Mm X 3 Mm Ms Strip Of Suitable Length For Mounting Box On The Pole. ( Ii ) Water Tight Front Cover With 2 Nos. Stainless Steel Hinges & 1 No. Screw For Tightening. ( Iii ) 4 Way, 220 V, 30 A, Dough Moulded Connector ( Smc With Stainless Steel Inserts ) ( Iv ) 16 Amp. Moulded Smc Rewireable Kit-Kat---1 No. ( V ) Suitable Size Hole At Suitable Location On Rear Wall For Cable & Wire Entry. ( Vi ) Earthing Bolt M6 X 20 Mm 6 Supplying , Replacement, Testing And Commissioning Of Floor Mounted Light Control Lt Feeder Pillar Cubical Type Double Door Of Size Of 800 Mm X 800Mm X 400 Mm Deep Duly Compartmentalized And With General Arrangement Made Out Of 2Mm Thick Crca Sheet Having Hinged Gasket Cover And Screwed Knobs With Double Locking Arrangement And Rain Protection Covers 100 Mm And Supported With Of Ms Angle Iron Legs And Bottom Frame Of Size 40Mm X 40Mm X 6Mm X 1Mtr. Long Grouted With 1:3:6 Cc Foundation And Should Be 0.7 Mtr. Above Ground Level. Legs Should Be Covered With Brick Walls, Connections, Inter Connections With Suitable Size Of Frls Pvc Insulated Copper Conductor Using Thimbles Wherever Required, Painting, Numbering I / C Supply And Fixing Of Following Accessories Complete As Required. ( A ) 100 Amps. Four Pole Mccb ( C-Series ) , 30Ka----1 No. ( B ) Analogue Timer Switch For Daily Operation And Toggle Switch Forauto / Manual --1 No. ( C ) 40 Amps. Ac-3, 3 Pole Power Contactor -----1 No. ( D ) 30 Ampere 4 Way Neutral Link / Connector ------2 Nos. ( E ) Voltmeter ( 0-500 Volt ) 96Mm X 96Mm Square Type With Selector Switch---1 No ( F ) Phase Indicating Lamp Set With Fuses ----1 Set ( G ) Danger Notice Plate -----1 No ( H ) Ai. Bus Bar 100 Amp. 4 Strip, 300 Mm Long With Sleeve And Nut Bolts-----1 Set. ( I ) Ammeter ( 0-30Amp ) 96Mm X 96Mm Square Type ----1No. ( J ) Lifting Hook On The Top Of Panel Board And Lighting Arrangement Inside The Feeder Pillar---- 1 No. ( K ) 16- 32 Amps. Sp Mcb ( C Series ) , 10Ka- 6 Nos. ( L ) 32 Amp Dpmcb, 10Ka, 2 Nos. ( M ) 63 Amp Tpmcb, 10Ka, 2 Nos. 7 Supplying Of Following Sizes Of Xlpe Insulated Pvc Sheathed Al. Cond. Armoured Power Cable Of 1.1 Kv Grade Including Connection, Testing Etc. As Required. A ) 2C X 16 Sq. Mm 8 B ) 4C X 25 Sq. Mm 9 Supplying And Drawing Following Sizes Of Frls Pvc Insulated Copper Conductor, Three Core Cable In The Existing Surface / Recessed Steel / Pvc Conduit As Required.A ) 3 X 1.5 Sq. Mm 10 Supplying And Laying Of Following Size Dwc Hdpe Pipe Isi Marked Along With All Accessories Like Socket, Bend, Couplers Etc.Conforming To Is 14930, Part Ii Complete With Fitting And Cutting, Jointing Etc.Direct In Ground ( 75 Cm Below Ground Level ) Including Excavation And Refilling The Trench But Excluding Sand Cushioning And Protective Covering Etc., Complete As Required. ( A ) 63 Mm Dia ( Od-63Mm & Id-51Mm Nominal ) 11 Laying Of One Number Pvc Insulated And Pvc Sheathed / Xlpe Power Cable Of 1.1 Kv Grade Of Following Size In The Existing Rcc / Hume / Metal Pipe As Required.A ) Upto 35 Sq. Mm 12 Providing And Fixing 6 Swg Dia G.I. Wire On Surface Or In Recess For Loop Earthing Along With Existing Surface / Recessed Conduit / Sub Main Wiring / Cable As Required. 13 Earthing With G.I. Earth Pipe 4.5 Metre Long, 40 Mm Dia Including Accessories, And Providing Masonry Enclosure With Cover Plate Having Locking Arrangement And Watering Pipe Etc. With Charcoal / Coke And Salt As Required. 14 Providing And Fixing 25 Mm X 5 Mm G.I. Strip On Surface Or In Recess For Connections Etc. As Required. 15 Supplying, Fabrication And Installation Of Wire Mesh Protection Cover Guard Made Out Of 8 Swg Ms Wire Of Size 1.5 Mtr X 1 Mtr X 1.5 Mtr ( Nominal ) Height Withm.S.Angle Iron Base Frame 40Mm X 40Mm X 6 Mmand 0.5 Mtr. Long Leg Support And Ms Strip With Support Size 40Mm X 6Mm As Per Drawing Approved By Engineer-In-Charge I / C Providing Of Suitable Size Of Door With S / F Of Godown Lock, Locking Arrangement, Painting And Grouting Of Angle Iron Frame In Cc ( 1:2:4 ) Etc. As Approved By Engineer-In-Charge Complete As Required. 16 Painting Of Existing Foundation With Two Coat Suitable Enamel Paint With Primer Etc Complete As Reqd. 17 Fabrication, Supplying And Fixing Of Wire Mesh Protection Guard Made Out Of Angle Iron Frame And 10 Swg Dia. Wire Suitable For 45 Watt Decorative Post Toplight Fitting As Approved By Engineer-In- Charge Completed Etc. As Reqd.

Refer document

INR 38196.0 /-

INR 19.09 Lakhs /-

Name of Work:-Upgradation/modernization of existing parks/green belts. SH: Augmentation of park with 4 mtr. high pole alongwith LED street light fittings & LED post top lantern gate light fitting with other allied accessories at Sec 16B park & water body Dwarka.

Sl. No.	Item Description
1	Supplying, Fabrication and Installation of 4 mtr. high pole made out of 65 mm dia NB, B class G.I pipe ISI marked duly welded with MS base plate of size 300 mm x 300 mm x 12 mm thick with stiffner of size 130 mm x 60 mm x 5 mm thick ,supplying and fixing of suitable size of braket for mounting the light fitting on the pole,suitable earth stud on base plate ,making suitable size hole in pole at a height of 2.5 meter from base plate for cable entry/exit(as per drawing approved by Engineer-in-charge), painting & numbering of pole, making suitable size hole in base plate for cable entry/exit into the pole and fixing the pole on the existing foundation with the existing nuts-bolts, washers etc. complete as required.
2	Providing and laying in position 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate)reinforced cement concrete foundation of size450 mm x 450 mm x 1200 mm deep (800 mm below ground level and 400 mm above ground level) including excavation of earth, refilling, providing, cutting, bending and placing in position, reinforcement of cold twisted bars of 12mm. dia-1200mm long (approx) 8Nos, and reinforcement ring of cold twisted bar of 8mm dia -1400mm long (approx) -6 nos, (with suitable spacing) including centering & shuttering as required with providing, fixing and positioning of one set of foundation bolts comprising of 4 nos., 16 mm dia, 750 mm long J-Type MS bolts (Threaded portion shall be galvanized) along with 3 nos. GI nuts and 2 nos. GI washers etc. per bolt and 1 no. anchor plate (3mm thick) of suitable size and providing 63 mm.(O.D) DWC pipe ISI marked for cable entry & exit etc. complete as required.
3	Supplying, replacement, testing and commissioning of30 watt LED street light luminaire with lens, made out of Al.pressure die cast housing enclosed with toughened glass, with IP-66 protection, driver, all accessories including providing of suitable size of wire mesh protection cover for fitting, connection testing etc complete as reqd.
4	Supplying, installation, testing and commissioning of 45 Watt decorative LED post top lantern fitting made up of die cast aluminum housing offer glare freesymmetric distribution withPC diffuser, IP-65on the existing G.I. pole etc complete as required.
5	Supply & fixing of pole connector box made out of Glass Reinforced Polyester Sheet Moulding Compound Conforming to IS:13410-1992 Grade S1 of outside dimensions 280 mm(H) x 170 mm(W)x 115 mm (D) (all the corners of the box should be round & not pointed ones) suitable to mount on 40/50/65 mm dia GI pole with the followingprovisions/accessories mounting in box complete as reqd. (i)2 nos. clamps made out of 19mm x 3 mm MS strip of suitable length for mounting box on the pole. (ii) Water tight front cover with 2 nos. stainless steel hinges & 1 no. screw for tightening. (iii)4 way, 220 V, 30 A, dough moulded connector (SMC with stainless steel inserts) (iv) 16 amp. Moulded SMC rewireable kit-kat---1 no. (v) Suitable size hole at suitable location on rear wall for cable & wire entry. (vi) Earthing bolt M6 x 20 mm
6	Supplying , replacement, testing and commissioning of floor mounted Light control LT feeder pillar cubical type double door of size of 800 mm x 800mm x 400 mm deep duly compartmentalized and with general arrangement made out of 2mm thick CRCA sheet having hinged gasket cover and screwed knobs with double locking arrangement and rain protection covers 100 mm and supported with of MS angle iron legs and bottom frame of size 40mm x 40mm x 6mm x 1mtr. long grouted with 1:3:6 CC foundation and should be 0.7 mtr. above ground level. Legs should be covered with brick walls, connections, inter connections with suitable size of FRLS PVC insulated copper conductor using thimbles wherever required, painting, numbering i/c supply and fixing of following accessories complete as required. (a)100 Amps. Four Pole MCCB ("C"-Series), 30kA----1 No. (b) Analogue Timer switch for daily operation and toggle switch forauto/manual --1 No. (c) 40 Amps. AC-3, 3 pole power contactor -----1 No. (d) 30 Ampere 4 way neutral link/connector ------2 Nos. (e) Voltmeter(0-500 Volt) 96mm X 96mm square type with selector switch---1 No (f) Phase Indicating Lamp Set with fuses ----1 Set (g) Danger notice plate -----1 No (h) AI. Bus Bar 100 amp. 4 strip, 300 mm long with sleeve and nut bolts-----1 Set. (i)Ammeter (0-30Amp) 96mm X 96mm square type ----1No. (j)Lifting hook on the top of panel board and lighting arrangement inside the feeder pillar---- 1 No. (k)16- 32 Amps. SP MCB ("C" Series), 10KA- 6 Nos. (l)32 Amp DPMCB, 10KA,2 nos. (M)63 Amp TPMCB, 10KA,2 nos.
7	Supplying of following sizes of XLPE insulated PVC sheathed Al. cond. Armoured power cable of 1.1 KV grade including connection, testing etc. as required. a) 2C x 16 sq. mm
8	b) 4C x 25 sq. mm
9	Supplying and drawing following sizes of FRLS PVC insulated copper conductor, three core cable in the existing surface/ recessed steel/ PVC conduit as required. A ) 3 x 1.5 sq. mm
10	Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc.conforming to IS 14930, Part II complete with fitting and cutting,jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. (a) 63 mm dia (OD-63mm & ID-51mm nominal)
11	Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of following size in the existing RCC/HUME/METAL pipe as required. a)Upto 35 sq. mm
12	Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/recessed conduit/sub main wiring/cable as required.
13	Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.
14	Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.
15	supplying, fabrication and installation of wire mesh protection cover guard made out of 8 SWG MS wire of size 1.5 mtr x 1 mtr x 1.5 mtr (nominal) height withM.S.angle iron base frame 40mm x 40mm x 6 mmand 0.5 mtr. long leg support and MS strip with support size 40mm x 6mm as per drawing approved by Engineer-in-charge i/c providing of suitable size of door with S/F of godown lock, locking arrangement, painting and grouting of angle iron frame in CC (1:2:4) etc. as approved by Engineer-in-charge complete as required.
16	painting of existing foundation with two coat suitable enamel paint with primer etc complete as reqd.
17	Fabrication, supplying and fixing of wire mesh protection guard made out of angle iron frame and 10 SWG dia. wire suitable for 45 Watt decorative post toplight fitting as approved by Engineer-in- charge completed etc. as reqd.