Tender For Development Of Parking, Construction Of Covered Approach To Temple And Installation Of Children Playing Equipments At Jandi Fort Hiranagar
Tender Value
39.83 Lakhs
Estimated cost
Bid Submission
21 Aug 2023
0 days left
EMD
79660
Bank guarantee accepted
Document Fee
600
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
billawar → Jammu And Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Development Of Parking, Construction Of Covered Approach To Temple And Installation Of Children Playing Equipments At Jandi Fort Hiranagar
BOQ
| Sl. No. | Item Description |
| 1 | Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead upto 50 m and lift upto1.5 m in -All kinds of soil. |
| 2 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: All kinds of soil : 25 meter beyond 1 m from cutting edge |
| 3 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) |
| 4 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) |
| 5 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 6 | Providing and laying 60mm thick factory made cement concrete interlocking paver block of M-30 grade made by block making machine with strong vibratory compaction and of approved size and design/shape laid in required colour and pattern over and including 50mm thick compacted bed of fine sand, filling the joints with coarse sand etc. all complete as per direction of Engineer-in-charge. |
| 7 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting , hoisting , fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. |
| 8 | Providing and fixing precoated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
| 9 | Providing and fixing precoated galvanised steel sheet roofing accessories0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : Ridges plain (500 - 600mm) |
| 10 | Centering and shuttering including strutting, propping etc. and removal of form work for: Retaining wall/Breast Wall |
| 11 | Centering and shuttering including strutting, propping etc. and removal of form work for: Foundations, footings, bases for columns |
| 12 | Construction of ornamental type view point incement concrete 1:2:4 mix in platform and M-15 grade in pillars and roof to the shape of bamboo finish including cost of pillars and roof to be RCC modelled as tree truncks , RCC shuttering, strutting propping etc, cost of reinforcement and curingand even cost of plastering, painting of approved shade & Brand matching cement conctrete as bamboo type incl; carriage of materials by mechanical transport from source to site of work with all leads , lifts, Complete Job. specifications include |
| 13 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade.Two or more coats on new work |
| 14 | Carriage of materials by MT |
| 15 | Sand Avg Lead 8 Km |
| 16 | Aggregates Avg Lead 8Km |
| 17 | Children Playing equipments as per instruction of Engineer-in Charge |
| 18 | Providing and installation/commissioning of chain swing of approved brand and manufacture of standard size made out of 75mmsq pipe .40 mm sq pipes.8mm pipe with foundation base of 0.75 * 0.75 * 1 .0 Meters in RCC 1:2:4 mix with cost of E/W, Mud mat. Soling. Shuttering including all transportation charges upto site of workcomplete. MAIN FRAME:M.S STRUCTURE |
| 19 | Providing and installation of merry-go-round 6 seater of approved brand and manufacture of 2.15 * 2.15 * 3.65 m size made out of 40mmsq pipes etc with foundation base of 0.75 * 0.75 * 1.7 Meters in RCC 1:2:4 mix with cost of E/W. Mud mat, Soling. Shuttering including all transportation charges upto site of work complete. Merry Go Round 6 SEATER MAIN FRAME:M.SSTRUCTURE |
| 20 | Providing and installation of rocket climber of approved brand and manufacture of size 2.15x2.15x3.65m with foundation base of 0.75 * 0.75 * 1 Meters in RCC 1:2:4 mix with cost of E / overline W . Mud mat. Soling. Shuttering 7 including all transportation charges upto site of work complete |
| 21 | Providing and installation/commissioning of monkey climber size and shape of approved brand made out of 40mm sq pipes etc with foundation base of 0.75 * 0.75 * 1 .0 Meters in RCC 1:2:4 mix with cost of F/W, Mud mat, Soling. Shuttering including all transportation charges upto site of work complete |
AI Tender Summary
Tender Timeline
Aug 05, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedAug 21, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedAug 22, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender