}

Tender For Provision Of Belt Conveyor System For Loading/ Off Loading Of Cargo And Transient Luggage At Modernized Transit Facility (Mtf) At 1568 Pnr Unit Under Ge 865 Ews At Leh, Leh-Jammu And Kashmir

Military Engineer Services-MES has published Tender For Provision Of Belt Conveyor System For Loading/ Off Loading Of Cargo And Transient Luggage At Modernized Transit Facility (Mtf) At 1568 Pnr Unit Under Ge 865 Ews At Leh. Submission Date for this Tender is 25-08-2023. Conveyors and Accessories Tenders in Leh Jammu And Kashmir. Bidders can get complete Tender details and download the document.




Tender Notice

38999305
Corrigendum : Tender For Provision Of Belt Conveyor System For Loading/ Off Loading Of Cargo And Transient Luggage At Modernized Transit Facility (Mtf) At 1568 Pnr Unit Under Ge 865 Ews At Leh
Open Tender
Indian
Jammu And Kashmir
Leh
25-08-2023

Tender Details

Tender For Provision Of Belt Conveyor System For Loading / Off Loading Of Cargo And Transient Luggage At Modernized Transit Facility ( Mtf ) At 1568 Pnr Unit Under Ge 865 Ews At Leh

Corrigendum Details

Sr No CorrigendumDate Corrignedum CorrigendumType NewSubmissionDate
1 18-Aug-2023 Bid Auto Extn Corrigendum Bid Auto Extn Corrigendum 25-08-2023

Key Value

Document Fees
INR 500 /-
EMD
INR 66000.0 /-
Tender Value
INR 32.92 Lakhs /-

BOQ Items

Name of Work: PROVN OF BELT CONVEYOR SYSTEM FOR LOADING/ OFFLOADING OF CARGO AND TRANSIENT LUGGAGE AT MODERNISED TRANSIT FACILITY (MTF) AT 1568 PNR UNIT UNDER GE 865 EWS AT LEH
Sl. No. Item Description
1M&L for supply, installation testing and commissioning of Belt Conveyor system 27 Mtr with 6 mm belt, belt coveyor system 3 mtr, control panel with VFD unit including complete assessories, complete all as specified and directed by Engr-in Charge. Note 1. Technical specifications & Parameters are as under:- (i) Belt - Flame retardant, Antistatic-6-8N Per mm elogation two ply 6mm thick, Black (ii)Skelton- SHS Section segment skeleton, Lasik Frame, Non Welded Profil, 235 JR Grade steel. (iii)Drive- Helical Geared Motor Direct, High torque range, Energy efficient. (iv)Surface Finish - Power Coated, RAL 7035. (v) Electric Motors - 2X3HP, 2X1HP Motor. (vi)Electric Load-Approximate 8000 watts Note 2. Compliance with recognized standards are as under:- (i)ANSI MH29.1 - Safty requirements for industrial Conveyors. (ii)NEFA 70 - National Safety Electric Code (iii)AWS D.1- Welding Standards (iv) ANSI Z 535- Safty labeling Requirements (v) ASTM- A36- Structural Steel Standards (vi)Applicable Portions of OSHA 29 CFR 1910- General Work Place Safety (vii) ISO 9001-2008 Certified Company.
2Supplying, laying, jointing and testing underground cable PVC XLPE insulated armoured and PVC sheathed LT 1100 volts grade (heave duty) with aluminium conductor 3.5 core, 50 Sqmm, confirming to IS-1554, laid in ducts/ through pipes, in floor, on poles, in trenches, complete all as specified and directed by Engr-in-Charge. Note:-Clamps, GI Pipes, excavation, earth work, sand cushioning and brick protection cover shall be measured and paid for separately.
3Excavating in trenches, n exc 1.5m wide and n exc 1.5m in depth, for oundation etc, or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5 in depth and getting out Hard/ Dense Soil, complete all as specified and directed by Engr-in-Charge.
4Returning, filling in (soil), including spreading, leveling, watering and well ramming in layers not exc 25m, complete all as specified and directed by Engr-in-Charge.
5Removing excavated material to a distance not exc 50m and depositing where directed at a level not exc 1.5m above the strating point, complete all as specified and directed by Engr-in-Charge.
6M&L Sand cushioning to underground cables 8 cm below the cable before laying & 15 cm above the cable after laying in clause 19.75 of SSR, complete all as specified and directed by Engr-in-Charge. Note:- Punned thickness only to be measured for payment.
7M&L factory made, machine pressed, unreinforced, pre-cast concrete cable cover class LV type-I flate size 250x 150x 40mm, complete all as specified and directed by Engr-in-Charge.
8S&F sheet metal enclosure TPN for DBs with 200 Amps bus bar of 6 way 415 volts with blank plate double door, complete all as specified and directed by Engr-in-Charge.
9S&F MCB TPN 63 Amp 415 Volts C Curve, complete all as specified and directed by Engr-in-Charge.
10Supply and fixing of fully automatic air break star delta motor starter capacity 3 HP,complete all as specified and directed by Engr-in-Charge.
11Supply and fixing of fully automatic air break direct-on-line motor starter Capacity 1 HP, complete all as specified and directed by Engr-in-Charge.
12Supplying and fixing 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVCtape and overall PVC sheathed in service connections suspended by insulated hangers not more than 1 metre apart including 4 mm suspension wire, one twin core cable flat or circular 16 Sqmm 2 core, complete all as specified and directed by Engr-in-Charge.
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail