Construction Of Bus Shelter Ward No.12 Atadi-Dravidar Colony In Pennathur Town Panchayat
Tender Value
7.50 Lakhs
Estimated cost
Bid Submission
11 Aug 2023
0 days left
EMD
7500
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
pennathur → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Bus Shelter Ward No.12 Atadi-Dravidar Colony In Pennathur Town Panchayat
BOQ
| Sl. No. | Item Description |
| 1 | Earth work excavation for foundation in all clauses of soils and sub soils to full depth as may be directed except in hard rock requiring blasting but inclusive of shoring strutting and boiling out water whenever necessary et complete complying with standard specification |
| 2 | Supplying and filling in basement with filling stone dustin layer of not more than 15 cm thick well rammed etc., complete. |
| 3 | Cement concrete 1:4:8 mix ( one cement four sand and eight aggregate)using 40mm gauge handbroken granite tone jelly for foundation including dewatering if found ecessary and laid in layers of not more than 15 cm thick and compacted,etc., complete complying withstandard specfication |
| 4 | Brick work in cm 1:5 mix(one cement and five sand )using country bricks ground maded of size 23 x 11 x 7 cm includingcuring,finishing and cost & Conveyance of all materials etc., complete. |
| 5 | Supplying and erecting centering for sides Centering for soffits of RCC slabs of plane surface like lintels, beams ,etc.,including strutting 3m high using mild steel sheets of size 90cm X60cm X and B.G 10 stiffened with M.S angles of size 25mm X 25mm X \"3mm laid over silver Oak (C.W) joists of size 10cm X 6.5cm (spaced at about 90cm c/c )and supported dy casurina props of 10cm to 13cm dia (spaced of 75cm C/C) complying with standard specification. |
| 6 | Grade beam |
| 7 | Colunm |
| 8 | Supplying fabricating and placing in position of ribbed steel rods for reinforcement to all RCC works as per the design given including cost ofsteel and binding wire also in all floors etc., complete |
| 9 | RCC 1: 1/2 :3 mix using 20 mm ISS HBG metal for RCC items of work excluding items of works excludingcentering,shuttering, and ost of reinforcement grill ,out including curing etc complete and also including fixingfan clamps and ixtures in rcc works wherever necessary as directed by departmental officer etc., complete. |
| 10 | Plastering surfaces of RCC itemssuch as slabs,beams,sunshades with cement mortar 1:3 -10mm thick including packing, providing cement mortar beading for sunshades staircase ,steps, lands slabs etc. complete complying with standard specifications. |
| 11 | Plastering with cm 1:5 mix( one cement and five sand ) to 12 mm thick including cost and conveyance of all materials in all floors etc.,as directed by departmental officers etc, complete complying with standard specifications. |
| 12 | Plain Cement concrete 1:2:4 mix ( one cement two sand and fouraggregate)using 20mm gauge handbroken granite tone jelly for foundation including dewatering if found ecessary and laid in layers of not more than 15 cm thick and compacted,etc., complete complying withstandard specfication |
| 13 | Weathering course with Best Quality of Brick jelly 20mm with Lime concrete including all cost and all labou charges etc… |
| 14 | Finishing top roof mix one course machine pressed tiles of size 20 cm x 20 cm x 2 cm approved qty with,CM.1:312 mm thick mixed with WPC at 2% by weight of cement used and top pointed with the same mortar etc |
| 15 | Providing floor finshing Granite mixusingCM 1:3: 20mm thickand granit stone cutting with laying including all cost and all laour Charge etc… |
| 16 | Painting two coats with ready mixed Exterior Emulsion paint of approved qualityand colour over a priming coat, including through scrapping,clean removel of dirt etc complete . |
| 17 | Wiring with 2 x 1.5 sq.mm. (22 / 0.3) PVC insulated single core unsheathed copper conductor of 1100V grade insuitable PVC rigid pipe on wall and ceiling with PVC accessories and with TW switch box and 5A FT switch withpainting of suitable colour for open PVC Tube light point / fan point (for electronic regulator) (6 points per coil) SD-20 |
| 18 | Wiring with 2 x 1.5 sq.mm. (22 / 0.3 ) PVC insulated single core unsheathed copper conductor cable of 1100V gradein suitable heavy gauge MS conduit pipe on wall and ceiling with MS accessories with 150mm x 100mm x 75mm MSswitch box for 5A 3 pin non interlocking flush type CS plug wfth painting of suitable colour with continuous earthwire connection of 14 SWG TC wire for open plug point SD-10 |
| 19 | Supply and fixing of 300mm (12\") sweep AC exhaust fan complete with necessary wall opening and making good of the wall.etc, complete as per standard specifications. SD 115 |
| 20 | Supply and fixing of single box type 4\"36 W flu fitting complete with copper choke and condensor with TW round blocks on wall or ceiling with flu tube with PVC unsheathed Copper leads from terminals to the fitting etc, complete as per standard specificationsSD 87 |
AI Tender Summary
Tender Timeline
Aug 04, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedAug 11, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedAug 11, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender