Public Works Department-PWD has published Operation & Running Maintenance Of Different Arws/Rws/Nrswp/Ridf/Jjm Schemes Under The Jurisdiction Of Dws Sub-Division, Mohanpur/Sh: Lifting & Lowering Of Different Capacity Burnt/Disorder Submersible Pump Sets(Sbdtw) Along With Column Assembly And All A. Submission Date for this Tender is 23-08-2023. Submersible Pump Tenders in agartala Tripura. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Washing and development of tube well by using hand pump or by any suitable method and testing of the well as per specification and direction of the Engineer-in-charge |
| 2 | Supplying & fitting fixing of single phase starter panel unit 3HP capacity comprise with 2 pole conductor, over load relay capacitor, volt meter, Ammeter of BCH/L&T make with necessary copper wire etc. complete as per direction of the Engg-in-charge. |
| 3 | Providing and fitting fixing steel sheet enclosed switch fuse unit (suitable for DIN fuses), triple pole with Neutral Link (TPN), 415/500 Volt, L & T / Havells / BCH make etc. complete as per specification and direction of the Engineer-incharge. |
| 4 | i) 32 amps |
| 5 | Supplying and fitting fixing M.S Pennal Box having size 75cm x 75cm x 60cm with 4 way slope roof of 18G/1.25mm MS sheet with fornt shutter (double door with proper looking arrangement fitted with 4 Nos. 50x50x5mm MS angle of 1.60mtr. long in/c providing and fitting wooden board inside box having size 70cmx70cmx1inch thick for all the electrical features like main switch, starter and electrical meter box complete in/c cost of necessary painting with epoxy paint two more coat over steel priming coat as per direction of Engg-in-charge. |
| 6 | Providing and fitting fixing GI pipe (Medium class) confurming to IS: 1239 for column pipe assemble for installation of Submersible pump motor as per direction of the Engineer-in-charge. |
| 7 | a) 40mm NB. |
| 8 | b) 32 mm dia |
| 9 | Labour charges for lifting of 2/3 HP submersible pump motor in/c column pipe assembly by chain pulley block as per direction of the Engg-in-charge. |
| 10 | Labour charge for lowering of 2/3 HP submersible pump motor in/c column pipe assembly by chain pulley block as per direction of the Engg-in-charge. |
| 11 | Supplying and installation of water lubricated submersible pump or Duke make (Modal No. DSP4RFH05) having capacity 1500 GPH at total head of 45mtr. Coupled with submersible meter 2 HP suitable for 240 volts (+10% verification) single phase 50HP. AC supply DOL starting method to run at 2880 RPM along with 35mtr. 2.5Sqm, PVC and 40mm dia GI pipe up to 100 ft. (30mtr) etc. complete as per direction of the Engineer-in-charge (required 40mm dia GI pipe will be supplied by the Deptt. at free of cost). |
| 12 | Supplying and installation of water lubricated submersible pump of Duke make (Modal No. DSP4RFH07) having capacity 2000 GPH at total head of 445mtr. Coupled with submersible meter 3 OHP suitable for 240 volts (+10% verification) single phase 50HP. AC supply DOL starting method to run at 2880RPM along with 35mtr. 2.5sqm. PVC insulated 3(three) core flat copper cable in/c fitting fixing and lowering 40mm dia GI pipe up to 100ft. (30mtr) etc. complete as per direction of the Engineer-in-charge (required 40mm dia GI pipe will be supplied by the Deptt at free of cost) |
| 13 | Providing and fitting fixing with PVC insulated 3 core flat copper cable conforming to relevant IS code for submersible motor motor with all necessary equipments and fittings as required as epr specification and direction of the Engineer-in-charge. |
| 14 | i) 2.50 sqm |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
