|
| 1 | Part-A |
| 2 | Supply delivery at site of Submersible pumping machinery directly coupled with water proof suitable size motor having following specification and as per NIT specification : DISCHARGE:45 cubic mtr./Hr.HEAD :55 Mtr.*N.B. (A) H/Q characteristic curve chart of pump set should be submitted before delivery.(B) Test Certificate of pump & motor should be submitted during delivery.Materials should be supplied as per specification of NIT and as per direction of EIC. |
| 3 | Supply delivery at site of 4 Sq. mm. 3 core, water proof flat copper cable.Materials should be supplied as per specification of NIT and as per direction of EIC. N.B:- Cable should be supplied as per site requirement. |
| 4 | Supply delivery at site of 1.1 Kv Grade 25 sq. mm. 3-1/2core XLPE insulated Al .Ar. Armoured cable.Materials should be supplied as per specification of NIT and as per direction of EIC.N.B:- Cable should be supplied as per site requirement. |
| 5 | Supply delivery at site of 1.1 Kv Grade 12 core, 2.5 Sq. mm. Armoured copper control cable.Materials should be supplied as per specification of NIT and as per direction of EIC.N.B:- Cable should be supplied as per site requirement. |
| 6 | Supply delivery at site of 100 Amp Kit-kat rewirable porcelain fuse unit (both base and bridge)Materials should be supplied as per specification of NIT and as per direction of EIC. |
| 7 | Supply delivery at site of 100 Amp. TPN, 415V, main switch with rewireable type fuse link in sheet steel enclosure.Materials should be supplied as per specification of NIT and as per direction of EIC. |
| 8 | Supply delivery at site of 100 Amps.4 way wall mounted Bus-Bar chamber having 4 Nos. Copper Bus-Bar.Materials should be supplied as per specification of NIT and as per direction of EIC. |
| 9 | Supply delivery fitting fixing of 100 Amp. 4 pole off load change over switch.Materials should be supplied as per specification of NIT and as per direction of EIC. |
| 10 | Supply & delivery at site 2 mm thick CRCAsheet steel enclosed type Indoor wall Mounted415 V MCC cum PDB Panel having required Feeders wih PLC as per specification of NIT (15HP to 25HP)Materials should be supplied as per specification of NIT and as per direction of EIC. |
| 11 | Supply and delivery at site of80 mm dia 3 mtr long UPVC standard type column pipe [cream color] with both side threaded and one end side socketed with registered KPMG.Materials should be supplied as per specification of NIT and as per direction of EIC. |
| 12 | Supply and delivery at site of80 mm dia 1.5 mtr long UPVC standard type column pipe [cream color] with both side threaded and one end side socketed with registered KPMG Materials should be supplied as per specification of NIT and as per direction of EIC. |
| 13 | Supply and delivery at site of 80mm dia CI top & bottom adopterMaterials should be supplied as per specification of NIT and as per direction of EIC. |
| 14 | Supply and delivery at site of Heavy type suitable dia MS suspension clamp along with nuts bolts and washer.Materials should be supplied as per specification of NIT and as per direction of EIC. |
| 15 | Supply and delivery at site of Three Phase actuator operated wafer type butterfly valve PN-1.0 rating of norminal dia 80mm. Materials should be supplied as per specification of NIT and as per direction of EIC. |
| 16 | Supply and delivery at site of 80mm dia CIDF sluice valve-1 no., Non Return Valve-1 no., CIDF 90° bend-2 nos. CI flanged tee- 1 no., CI flanged short piece -2nos ,flangeetc. Materials should be supplied as per specification of NIT and as per direction of EIC. |
| 17 | Supply and delivery at site of Heavy type 250mm dia split type tube well cover with 12 mm thick clamping arrangement including holes of column pipe, air pipe and cable entry .Materials should be supplied as per specification of NIT and as per direction of EIC. |
| 18 | Supply and delivery at site ofPressure gauge [Make- H. Guru/Febig] 102 mm. dia [0-7 kg/Sq.cm] brass cock and fitting complete [ This cost includes 15 mm. dia G.I. pipes and specials]Materials should be supplied as per specification of NIT and as per direction of EIC. |
| 19 | Supply and delivery at site of Anti snapping safety device for pump set by supplying suitable size MS clamps two sets and nylon rope of required length including supplying of nuts, bolts and all other materials.Materials should be supplied as per specification of NIT and as per direction of EIC. |
| 20 | Supply delivery at site of Depth gauge 100mm dia with steel air pipe of required length with all accessories for the above work including supply of good quality hand pump [This cost includes 15 mm. dia G.I. pipes and specials.Materials should be supplied as per specification of NIT and as per direction of EIC. |
| 21 | Earthing and lighting protection for pump house and electrical installation as per ISS and IE rules and as per technical specification of NIT.Materials should be supplied as per specification of NIT and as per direction of EIC. |
| 22 | Supply delivery at site and storage of illumination arrangement like suitable size wire, switch ,switch board ,tube light fittingLED outdoor fixturecomplete as per specification of NIT.Materials should be supplied as per specification of NIT and as per direction of EIC. |
| 23 | Supply & delivery at sites chair,table,Celing Fan,wooden board, Kiox Box .Materials should be supplied as per specification of NIT and as per direction of EIC. |
| 24 | Supply & delivery at site of suitable capacity Power correction arrangement.(25 KVA)Materials should be supplied as per specification of NIT and as per direction of EIC. |
| 25 | Supply delivery at site and storage of Disinfection arrangement with Flow rate 100 LPH.Materials should be supplied as per specification of NIT and as per direction of EIC. |
| 26 | PART-B |
| 27 | Installation of all items as mentioned in Sl.No.1 to 25 (Part-A) including construction of Pump foundations, pipe supports, valve supports, laying of cables with necessary jointing materials, earthing arrangement of motors, starters, including supply of all erection items viz. rubber gaskets, nuts & bolts etc., including cost ofwelding etc. as required for complete installation as per Hydraulic standard & IE rules in compliance with specification of NITand upto entire satisfaction of EIC. |
| 28 | Painting of the installation (viz.pumps,valves, pipe lines etc.by two coats of epoxy paint (colour to be decided by EIC) over a coat of primer as per NIT specifiaction & direction of EIC. |
| 29 | Testing & Commissioning of the entire installation i.e.Pumps, Motors,valves etc. as in PART A of (Sl no. 1 to 25) as per direction and to the entire satisfaction of E.I.C. |
| 30 | Operation &guarding of the pumping machinery with full satisfaction of EIC (90days x 01 nos Tube well) = 90Days. |
| 31 | Supervision charges for electrical installation by licensed electrician as per IE Rules, 1956 read with latest amendments with overhead expenditures. |
| 32 | TOTAL OF PART - A |
| 33 | TOTAL OF PART - B |
| 34 | TOTAL |
| 35 | Add: GST @ 18% |
| 36 | TOTAL |
| 37 | Add: LW Cess @ 1% |
