|
| 1 | HSR 24.2.5.1:- Laying and fixing of cable on surface/ cable tray etc. as required:- 2.5 Sq mm to 10 Sq mm 2 to 4 Core |
| 2 | HSR 23.24.3.3:- Supply and erection of metal clad bus bar chamber made from 1.6 mm thick M.S. sheet and fixing with rag bolts on wall or on existing pedestal/angle iron frame including bonding, detachable top and bottom including painting and necessary connection etc. (Aluminum bars). 100 amp 4 bars of 100 cm each (cross section 25 mm x 6 mm) chamber over all size 1.10 m x 45 cm x 18cm. AS PER APPROVED MAKE |
| 3 | HSR 20.114.1:- Supplying erection, testing of fully automatic electric control panel board for T/Wells in Pump Chamber consisting of MS sheet of thickness 14 gauge duly painted box type floor mounted made of angle Frame containing 1 no. fully automatic air brake starter suitable for Motor of the following capacity, Min switch of suitable range with HRC fuse, 1 no. volt meter (0 to 500 volts), 1 No. Amp. Meter of 0 to 100 amp. 3 sets of indicating lamp capacitor of suitable capacity and 1 no. single phase preventers with the timer switch including wiring in panel board and suitable electric energy meter wiring in Electric Control Panel Board complete in all respect as per specification given in Schedule No. II, Including MCB, suitable, Capacitor, Wooden Box etc. as per site requirement complete in all respect. 10 HP Motor, Make: - L&T, SIEMENS, BCH, SCHNEIDER. |
| 4 | HSR 21.105.14:- Supplying, erection, testing and commissioning of Submersible motor pumping set non-clog for sewerage having head 12.00 m as per the indicated requirements of discharge in 700 LPM and power capacity in 5 BHP Make: KSB, CRI, Kirlosker, Crompton Greaves, Lubi) |
| 5 | HSR 21.105.10:- Supplying, erection, testing and commissioning of Submersible motor pumping set non-clog for sewerage having head 12.00 m as per the indicated requirements of discharge in 500 LPM and power capacity in 02 BHP Make: KSB, CRI, Kirlosker, Crompton Greaves, Lubi) |
| 6 | HSR 20.11.2:- Providing & fixing cast iron double flanged swing check type reflux (non-return) valves PN-1.6 marked with IS:5312 including nuts & bolts marked with IS:1363, rubber sheet marked with IS:638 etc., carriage loading, unloading, stacking, handling, re-handling etc. Complete in all respect to the satisfaction of Engineer-in-charge. 100 mm, Make :- Kejriwal, Arkoo, SS |
| 7 | HSR 20.69.1:- Providing, lowering, laying in trenches, aligning, fixing in position and jointing at all level/depths cast iron (Cl) standard specials plain /flanged/ socketed confirming to IS13382 with rubber ring, nut bolts and rubber sheet such as tees, bends, tapers, caps etc. complete including all material, labour, testing and commissioning along with pipe line as per Technical Specifications and as per direction of Engineer. Up to 300mm dia |
| 8 | HSR 20.21.9:- Labour for laying jointing, fixing and testing G.1./P.V.C./W.I. pipe lines and special tees, bends, sockets, elbows etc. in trenches in the ground cutting, threading and testing, etc. complete. 100 mm internal diameter |
