Tender For Upgradation Of Helipad At Neyraks (By Way Of Construction Of Waiting Hall And Vip Room). (Under Sdp)
Tender Value
41.32 Lakhs
Estimated cost
Bid Submission
10 Aug 2023
0 days left
EMD
82640
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
khaltsi → Jammu And Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Upgradation Of Helipad At Neyraks (By Way Of Construction Of Waiting Hall And Vip Room). (Under Sdp)
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres:a)All kinds of soil 80% |
| 2 | Dumping stone including cost of stone On Horizontal |
| 3 | Providing and laying in position cement concrete of specified grade including curing and cost of centring and shuttering. All work upto plinth level with: 1:4:8(1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) Including cost and carriage of cement |
| 4 | Providing and laying in position cement concrete of specified grade including curing and cost of centring and shuttering. All work upto plinth level with: 1:3:6(1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) Including cost and carriage of cement |
| 5 | Random Rubble masonry with hard stone in foundation and plinth including leveling up with cement concrete 1:6:12 (1 Cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) upto plinth level and curing complete with: Cement mortar 1:6 (1 Cement : 6 coarse sand) Nallah Including cost and carriage of material complete Job |
| 6 | Dry random rubble masonry with hard stone in foundation and plinth: Without bond stoneIncluding cost and carriage of materials complete Job |
| 7 | Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing and cost of centering shuttering, finishing and reinforcement. 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) Including cost and carriage of cement |
| 8 | Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing and cost of centering shuttering, finishing and reinforcement. Including cost and carriage of cement. |
| 9 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more Including cost and carriage of steel. |
| 10 | Providing & fixing upto floor five level precast cement concrete solid blocks including hoisting and setting in position in cement mortar 1:3 (1cement:3 coarse sand), cost of required centring, shuttering and curing complete 1:3:6(1 cement : 3 coarse sand : 6 graded crushed stone aggregate 20 mm nominal size) Including cost and carriage of cement. |
| 11 | Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 50 mm thick with 20mm nominal size stone aggregate.Including cost and carriage of cement. |
| 12 | 15mm Cement plaster on the rough side of single or half brick wall of mix:1 : 4 ( 1 cement : 4 fine sand) Including cost and carriage of cement |
| 13 | 6 mm cement plaster to ceiling of mix 1 : 3 (1 cement : 3 fine sand) Including cost and carriage of cement |
| 14 | Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 2 mm thick |
| 15 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer) |
| 16 | Applying priming coat: With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) |
| 17 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work |
| 18 | Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm) |
| 19 | 20mm cement plaster finished with a floating coat of neat cement of mix : 1:4 ( 1 cement : 4 fine sand) Including cost and carriage ofcement. |
| 20 | Providing and fixing of ornamental Shingstak over door and windows Complete Job |
| 21 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately):Second class kail wood |
| 22 | Providing and fixing panelled or panelled and glazed shutters for doors,windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately) Second kail wood 35mm |
| 23 | Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. Second class Kail wood 35mm |
| 24 | Providing and fixing specified board medium density exterior grade (Grade I) to frame, backing or studding with screws etc. complete (Frames, backing or studding to be paid separately) : Flat pressed 3 layer particle board or graded wood particle board IS:3087 |
| 25 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-in charge all fitting complete Job25mm (Including all fittings complete Job) |
| 26 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-in charge all fitting complete Job32mm (Including all fittings complete Job) |
| 27 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-in charge all fitting complete Job40mm (Including all fittings complete Job) |
| 28 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank |
| 29 | Providing and fixing white vitreous china pedestal type water closet (Indian type W.C .pan) with seat and lid,10 litre low level white P.V.C. flushing cistern including flush pipe with manually controlled device (handle lever) conforming to IS:7231, with all fittings and fixtures, complete including cutting and making good the walls and floors wherever requied: W.C. pan with lSI marked white solid plastic seat and lid. of approved brand |
| 30 | Providing and fixing plain bend of required degree:100 mm dia. |
| 31 | Providing and fixing brass long nose bib cock of approved quality. 15 mm nominal bore |
| 32 | Providing and fixing FT elbow of approved make |
| 33 | Ptroviding and fixing waste coupling for wash basin and sink of approved quality and colour 38/40mm |
| 34 | Providing and fixing CP Jalli of approved make |
| 35 | Providing and fixing toilet paper holder of approved make |
| 36 | Providing and fixing mirror of superior glass( of approved quality) and of required shape and size with plastic . moulded frame of approved make and shade with 6 mm thick hard board backing Rectangular shape 1500x450 mm |
| 37 | Providing and fixing wash basin with C. I./M.S. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required: White Vitreous China wash basin size 550x400 mm with single 15 mm C.P. brass pillar taps |
| 38 | Providing and fixing Salem Stainless Steel A lSI 304 (18/ 8) kitchen sink as per I.S. 13983 with C.l. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required: 510x1040mm bowl depth 250mm |
| 39 | Providing and fixing Urinal Pot approved quality |
| 40 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour: 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms. |
| 41 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, one or more coats on old work. |
| 42 | Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete.125 mm |
| 43 | Providing and fixing ISI marked oxidized M.S. tower bolt black finish, (Barrel type) with necessary screws etc complete.100x10 mm |
| 44 | Providing and laying of un-pliasticised PVC connection Including all fittings and excavation of unhygienic malbas4\" |
| 45 | Providing and laying of un-pliasticised PVC connection Including all fittings and excavation of unhygienic malbas3\" |
| 46 | Providing and fixing insullation work for PPRusing k-flex 25mm dia 13mm thickness and 19mm thick 32mm dia including tapping, glass wool, chicken mesh, polythene, aluminium sheetand heat tape of approved quality denforse or equivalent 33watt/mtrComplete Job |
| 47 | Providing insullation for water storage tank by way of using Nitrale sheet 25mm thick, glass wool 50mm thick,chicken mesh, polythene, and aluminium sheet.(Complete Job) |
| 48 | Carriage of materials from source to site of work by Mechanical transport including cost of loading,Unloading and stacking complete. a) Sand an avg lead 50 kms. |
| 49 | b) Stone sggregate an avg lead 50Km |
| 50 | c) Stone an avg lead 05Km |
| 51 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required. |
| 52 | Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. |
| 53 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.2x1.5Sq.mm+ 1 x 2.5Sq.mm earth wire |
| 54 | 2x 2.5 Sq.mm+ 1 x 2.5 Sq.mm earth wire |
| 55 | 2x10Sqmm +1x6Sq.mm earth wire |
| 56 | Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.1x 1.5 sq.mm |
| 57 | Supplying and fixing following modular typeswitch/socket on the existing switch box coverincluding connections etc. as required.5/6 A switch |
| 58 | 3 pin 5/6 A socket outlet |
| 59 | 15/16 A switch |
| 60 | 6 pin 15/16 A socket outlet |
| 61 | Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required. |
| 62 | Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. |
| 63 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 2nos 5/6 amps modular socket outlet and 2nos. 5/6 amps modular switch, connection etc.as required |
| 64 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 6 pin 5/6 amps & 15/16 amps. modular socket outlet and 15/16 amps modular switch connection etc. as required. |
| 65 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 230 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 8 way Double Door |
| 66 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole 6/16 amp. |
| 67 | Supply and fixing of following sizes of PVC conduit alongwith accessories in surface/recessed including cutting the wall and making good the same in case of recessed conduit as required. 25mm |
| 68 | Supply, installation, testing & commissioning of GI Electrode Earthing with 50mm dia GI pipe ISI marked and 3 meter length, with 5mm thick electrode, the electrode should be hot-dip galvinised. The GI Electrode shall bepre-filled with Cristaline Conductive Materila (CCM). The GI electrode shall be surrounded withBEE MOIST compound to provide maximum contact betwen the electrode and compound should be eco-friendlyGI Electrode Earthing should be maintinance free and does not requireregular manual addition of water . The earthing pit should be covered with PVC cover. |
| 69 | Supplying and laying 25mm x 5mm G.I strip at 0.50 metre below ground as strip earth electrode including connection/terminating with G.I nut, bolt, spring, washer etc. as required. ( Jointing shall be done by overlappingand with 2 sets of G.I nut bolt & spring washer spaced at 50mm). |
| 70 | Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required. |
| 71 | Supplying and fixing MCCB in cubical panel board Providing and fixing following rating and breaking capacity MCCB FP in existing cubical panel board including drilling of holes in cubical panel and making connections etc.As required ( Make as per annexure enclosed) MCCB FP100 Amp 30 KA |
| 72 | Change over Switch 63Amp MCCB Type FP |
| 73 | Fabrication ,supplying ,installation testing and commisssioning of following pannel made out of 2mm thick M.S sheet, wall mounted ,vermin & dust proof ,outdoor type with lockable type hinged doors,duly painted with provision for fixing of 1 no incomer MCCB,MCCB type change over switch -1 Noincluding supply and fixing 2 set of Aluminium Bus bar ,and strip for housingMCB,s 12 Nos , MF Digital Meter and and other allied accessories as required .(Make as per annexure) |
| 74 | Supplying and fixing of following rating 240/415 Volt\"s \"C\" Series miniature circuit breakersuitable for lighting and other loads of following poles in the existing MCB DB complete with connections, testing and commissioning. (Above to 32 Amp.). SPN 63 Amp |
| 75 | Supplying and fixing of 1.1 KV PVC insulated and PVC sheathed XLPE at Power Cable of following sizes on surface/surface cable tray,0.50 mtr bleow ground level etc. as required including carriage upto site of work. (Make as per annexure enclosed) 25Sq mm 3.5 CoreArmoured |
| 76 | 20 watt LED tube light fitting. LL20-221-XXX-65NE3 of wipro or equivalent make and model Philips/Crompton Greaves. |
| 77 | Supplying and fixing of Angle/Baten Holder with 9 watt LED Lamp polycarbonate includingmaking complete connnections etc as required.(Make as per annexure enclosed) |
| 78 | Exhaust fan 300 mm size (Heavyduty) CG transair or equivalant approved make |
AI Tender Summary
Tender Timeline
Aug 03, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedAug 10, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedAug 12, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender