Road And Building Division has published Tender For Construction Of Civil Infrastructure For Installation Of Biomedical Waste Management Equipment At Chc Golamunda. Submission Date for this Tender is 14-08-2023. Infrastructure Work Tenders in bhawanipatna Odisha. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | Earth Workinexavationoffoundation in hard soil within initial leads of 50m & lifts of 1.5m including dressing and levelling of bed etc. and adding contractor"s profit and over head charges, etc. complete in all respect. |
2 | Supplying & filling of foundation with course sand well watered and rammed including cost, cost of all labour, carriage, royalty complete in all respect.(As Per A/R Page No-1, Item No-2) |
3 | Cement Concrete (1:3:6) using 40mmsize hard granite C.B. metal approved quality from approved quarry including cost, carriage, royalty, cost of all labour. etc complete and as directed by E.I.C. |
4 | Cement Concrete (1:2:4) using 12mmsize hard granite C.B. chips approved quality from approved quarry including cost, carriage, royalty, cost of all labour. etc complete and as directed by E.I.C. |
5 | R.C.C. M-20 grade with 20mm and down grade C.B. chips of approved quality from approved quarry including hoisting, laying hire charges of concrete mixture, vibrator, watering, curing and cost of all materials and labour, centering shuttering etc complete but excluding cost of reinforcement. |
6 | Column Base |
7 | Plinth beam |
8 | Column Beam |
9 | Lintel |
10 | Chhajja |
11 | Roof Slab |
12 | RCC at Window Sill Level |
13 | Straightening, cutting, bending bent up or coiled rods, including cranking, hooking, welding or jointing the M.S. rods or tor confirming to I.S. 432 (Plain) and 1785 (Tor) steel and binding, tying the grills, hoisting, lowering and placing in proper position required for R.C.C. works including cost, conveyance and taxes of M.S. rods or tor steel and binding wires of 18 to 20 gauge and cost of all labour etc.complete in all respect. |
14 | 25mm thick Grading Concrete (1:2:2) using 4.7 mm size C.B.H.G chips including two coats of primer,watering,curing with coat,coneyance,taxes and cost of all labour (T&P) etc, complete as per the direction ofE-I-C |
15 | Brick work with Flyash Bricks 25cm x 12cm x 8cm size having crushing strength not less than 75Kg/cm2 with dimensional tolerance ±2 percent in cement mortar (1:6) in Super Structure including watering curing, cost of carriage, royalty and taxes of all materials, cost of all labour, etc complete as per the direction of E.I.C. Foundation & plinth |
16 | Brick work with Flyash Bricks 25cm x 12cm x 8cm size having crushing strength not less than 75Kg/cm2 with dimensional tolerance ±2 percent in cement mortar (1:6) in Super Structure including watering curing, cost of carriage, royalty and taxes of all materials, cost of all labour, etc complete as per the direction of E.I.C. SUperstruture |
17 | 25mm AS flooring with cement mortar (1:2:4). Nominal mis as per Drawing and technical specification with cost & conveyance of all materials, cost of all labour, etc complete. |
18 | 12mm thick C.P.(1:6) on brick masonary to the smooth surface including watering, curing, cost, carriage, royalty of all materials, cost of all labour, etc complete as per the direction of E.I.C. |
19 | 16mm thick C.P. (1:6) over brick masonary to the smooth surface including watering, curing cost, carriage, royalty, and taxes of all materials, cost of all labour, etc complete as per the direction of E.I.C. |
20 | 6 mm thick C.P. (1:4) to RCC surfaces finished smooth including closed deep chiping and slury treatment , watering, curing cost, carriage & royaltyof all materials, cost of all labour,etc complete as per the direction ofE.I.C.Ref(A/R-2006,P-103,Item no-27) |
21 | Wall painting 2 coats with plastic emulsion paint of approved shade on new work to give an even shade including cost of paint etc complete. |
22 | Finishing out side wall suface with weather coat(I.S.I) two paint with any approved shade over a coat of primerincluding cost of all materials, labour and T&P require for the work etc. complete as directed by the E.I.C. |
23 | Supplying of M.S. Door, Window with grills, Grills made out of M.S. Angle frame, M.S. Flat, Sheetetc of approved section & design, electrically welded properly with all necessary locking arrengement, and 1 coat red oxide primer including cost of all materials, labour charges, carriage of materials to site etc. complete. |
24 | Painting two coats with approved enamel paints of approved colour, shade over a coat ofprimer including sand papering, polishing the surface, cost, conveyances of all materials and cost of all labour etc, complete as per specification & direction of E.I.C. |
25 | Providing supplying fitting and fixing of Deep Burial pit & sharp pit with pre-cast RCC Circular slab etc. complete including cost of all materials, labour with T&P etc complete in all respect. |
26 | E.I Works:- Recessed wirring tolight point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor of ISI markedMake- Finolex/Anchor/Polycab/HAVELLS/RR KABLE/KEI or equievalant reputed makeas per direction of Engineer -in -Charge. |
27 | a)Group-A |
28 | b) Group-B |
29 | c) Group-C |
30 | Recessed modular wiring to 5/6A socket outlet with 2x1mm2 PVCInsulatted S.C F.R multistand Cu.wire ISI marked in 20mm non-metalic PVC flexible conduit pipe with modular type switch. |
31 | a) Group-A |
32 | b) on existing board |
33 | Recessed modular wiring to power plug point consisting of 16A modular shuttered socket and 16A indicator type switchwith 2x4mm2 PVCInsulatted S.C F.R multistand Cu.wire ISI marked in 20mm non-metalic PVC flexible conduit along with1x1.5mm2 F.R PVC insulated S.C C.U. wire for loop earthing as required of Havels make. |
34 | Wiring to Circuit/ Sub-main along with earth wire with following size of FR PVC S.C.Cu. Wire (Make of wire Finolex/ Anchor/ Havels/HPL/L&T/ V.Guard. |
35 | 1x1.5mm2 Sub-Main Wiring for Invertor connectiom. |
36 | a) (1.8.1) 2X1.5mm2 + 1x1.5mm2 |
37 | b) (1.8.2) 2X2.5mm2 + 1x1.5mm2 |
38 | c) (1.8.3) 2X4mm2 + 1x1.5mm2 |
39 | S/Fof Modular type electronic fan regulator of havells/legrand/equivalent make |
40 | S/F of1200mm Ac ceilling Fan of model usha /Bajaj/C&G/Havells make of mentioned brand with Fan rod& Hook as per direction of engineer in charge |
41 | S/F of 300mm Exhaust Fan of model Usha turbo jet /Bajaj freshee with louvers i.e safe guard . |
42 | S/F of (4+12) way double door TPN distribution Boxfor single phase out goingincoming- 63Amp TPN MCB of havells make, outgoing- 12 x (6-32)A SP MCBas per direction of engineer in charge( DB & MCB of make Schnider/Hager/Legrand/L&T). |
43 | S/f of 18watt LED tube light fittings of phillips/ bajaj/ Havels/ HPL make. |
44 | S/F3 1/2 x 25mm2 PVC Al Armoured Cable Of ISI Marked (Polycab/Nicco/Havels) |
45 | Laying of cable on wall surface by clamping. |
46 | S/F of90wt LED Street light complete with lamp of Havels/HPL make. |
47 | Supply and Fixing of GI bend pipe for street lightincluding all accessories i.e clamp or jam lock etc |
48 | 10mm2 Multi StandCopper wiremake Finolex/Anchor/Havels/HPL/L&T/V.Guard) |
49 | S/F of Standard Earthing with G.I. earth pipe of 3mtr.Long 40mm dia ISI marked including accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal and salt as required. |
50 | S/f of extra long No.8 G.I wire for running of earth from panel to pit. |
51 | S/f of 40A TP Isolator of make V.Guard/ Havels. |
52 | G.P.H Works:- Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes conforming to IS:15778, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge |
53 | 20mm dia PVC ASTM pipe (sch-80) |
54 | 25mm dia PVC ASTM pipe (sch-80) |
55 | Supplying all materials, labour T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all joiniting materialsincluding cost & conveyance of all materials to worksite, payment oftaxes etc. allcomplete as per P.H specification and direction of the Engineer-in-charge. |
56 | 15mm dia CP angle stop cock (Con-CHR-053KN Jaquar make) |
57 | 15mm dia CP Long Body Bib cock (Con-CHR-107KN Jaquar make) |
58 | 125mm CP grating |
59 | Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer"s specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches , cost & conveyance of all materials to worksite, payment oftaxes etc.all complete as per P.H specification and direction of the Engineer-in-charge. |
60 | 110mm U-PVC SWR Pipe (Ori Plast/Finolex/Supreme Make Type-B) |
61 | 110mm U-PVC door bend(Ori Plast/Finolex/Supreme Make) |
62 | 110mm U-PVC Plain bend(Ori Plast/Finolex/Supreme Make) |
63 | 110mm U-PVC Plain tee(Ori Plast/Finolex/Supreme Make) |
64 | 110mm U-PVC Socket(Ori Plast/Finolex/Supreme Make) |
65 | Supplying all materials, labour T&P and fixing wash basins with hole for pillar taps with cast iron or M.S.brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered "Hot" and "Cold" with long screws, shanks and back nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste, cost & conveyance of all materials to worksite, payment oftaxes etc. all complete as perP.H specification and direction of the Engineer-in-charge |
66 | 550mmx400mm W.H.basin (Hindware/Parryware/Neycer make)with 15mm dia C.P.pillar cock (Plaza make) with pedestal |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail