Military Engineer Services-MES has published Tender For Provision Of Toilet Block For Ors Additional / Alternator To Building No.T-08 And Provision Of Pathway With Chequred Tile Near Bldg No T-17 And T-18 At Lekhapani. Submission Date for this Tender is 30-08-2023. Toilet Bathroom Tenders in Shillong Meghalaya. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 23-Aug-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 30-08-2023 |
| Sl. No. | Item Description |
| 1 | Surface excavationnot exceeding 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil complete all as specified and directed. |
| 2 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth for foundations,manholes,laying cables,pipe lines,etc and getting out in soft/ loose soil complete all as specified and directed. |
| 3 | Excavating over areasn exc 1.5m deep and getting out in soft/loose soil complete all as specified and directed. |
| 4 | All as per item No.03 above but exc 1.5 m deep and n. exc 3 m deep complete all as specified and directed. |
| 5 | Returning filling in including spreading, levelling, watering and well ramming in layers n.exc 25 cm of soft loose soil,complete all as specified and as directed. |
| 6 | Removing excavated soil to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed. |
| 7 | M&L PCC (1:4:8), type D-2, (using 40mm graded stoneaggregates) asin foundations, filling, mass concrete etccomplete all as specified and directed. |
| 8 | M&L RCC M-25 (Design mix)(using 20mm graded stone aggregate) as in foundations, including rafts,footings,plinth beams;etc comlpete all as specified and directed. |
| 9 | M&L RCC M-25 (Design mix)(using 20mm graded stone aggregate) as in beams, cantilevers, bressummers, lintels over 1.5 m spanetc complete all as specified anddirected. comlpete all as specified and directed. |
| 10 | M&L RCC M-25 (Design mix)(using 20mm graded stone aggregate) as inslabs, supported on walls beams and columns in floors, roofs, landings, balconies, canopies, deck slabs,in shelves and the like includingslabs of septic tank, soak well etc complete all as specified and directed |
| 11 | M&L Precast RCC M-25 (Design mix)(using 20mm graded stone aggregate)as in cover slabs for manholes, septic tanks,soakage well,etc and set in CM (1:4)with plain fair faces incl chamfered, weathering, throating etc incl necessaryform workcomplete all as specified and directed. |
| 12 | M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM (1:6) complete all as specified and directed. |
| 13 | M&L Brick work with sub class old size "B" bricks, straight or curved on plan to any radius, built in CM (1:4) as in half brick thick walls complete as specified and directed. |
| 14 | M&L Brickwork with sub class ‘B’ bricks in one brick thick honey comb walling, built in CM (1:6) complete all as specified and directed. |
| 15 | M&L Loose filling with broken brick aggregates of gauge 80 to 150 mm in soakage pit, soak well etccomplete all as specified and directed |
| 16 | Use and waste of form work to sides of concrete foundation, footings, base of coloumns, raft beams, sides and soffits (if any) of foundation and plinth beams and similar work vertical or to batter for rough finished flat surfaces of concrete complete all as specified and as directed. |
| 17 | Use and waste of form work to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc complete all as specified anddirected. |
| 18 | Use and waste of form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200 mm thick, for rough finished flat surfaces of concrete complete all as specified and directed. |
| 19 | Taking down chowkat or frame with shutters (without taking off shutters from the frame) not exceeding 1.5 sqm each and making good to disturbed surfaces complete all as specified and as directed by the Engineer-in-Charge. |
| 20 | Taking down chowkat or frame with shutters (without taking off shutters from the frame) exceeding 1.5 sqm but not exceeding 4.0 sqm each and making good to disturbed surfaces complete all as specified and directed by the Engineer-in-Charge. |
| 21 | M&L for fixed in repairs for 2nd class soft wood scantling, clean swan, timber fixed as in framed work to replace old and decayed timber (incl piecing, scarfing, etc, of old and new timbers if required) and removing defective portions complete all as specified and as directed. |
| 22 | S&F 2nd class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed. |
| 23 | M & L for Plain fillets square, rectangular or triangular in section clean sawan secured with nails or bradsexc 3 and nexc 6 sqcm complete all as specified and as directed. |
| 24 | S&F 30 mm thick, Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides & both face is covered with decorative face veneer with lipping / frame to match & fixed to chowkats complete all as specified and directed. |
| 25 | S&F 35 mm thick, hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) fitted to chowkats complete all as specified and directed. |
| 26 | S&F Steel ventilatorsfixed type complete with glazing bars dovtailed or welded,etc complete all as specified and as directed |
| 27 | M&L Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plainflushdoor shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisturproof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer- In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) |
| 28 | S & F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ S & F Ceosetory windows & other Frames/Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives(maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). |
| 29 | M & Lin fixed in repairs 4mm thick Asbestos cement plain building boards, fixed to timber framework with screws fixed in ceiling flat or sloping complete all as specified andas directed by Engineer – in - Charge. |
| 30 | S & F for aluminum powder coated (powder coated of required colour) three track sliding windows frame top & sides of size 92 x 31.75 x 1.50mm (section No 20831) bottom of size 92 x 31.72 x 1.50mm (Soction of 20832) and shutter top & bottom of size 40 x 18 x 1.55 (section 20738) and lock side shutter frame of size 40 x 15 x 1.45mm (Section 20737) with rubber gasket, beading and locking arrangement including making good to the disturbed portion complete including stainless steel wire mesh 0.36mm nominal dia with 1.40mm average aperture and fixed with stainless steel wire staples and fixing 5mm thick glass with necessary rubber beading gasket etc complete all as specified and directed by Eng-in-charge. |
| 31 | S&F 100 mm butt hinges, type B-21, extruded aluminium alloy with galvanised mild steel hinge pin, anodised & fixed todoor complete all as specified and directed. |
| 32 | S&F 200 mm size, aluminium anodised , barrel tower bolts of extruded section & fixed completeall as specified and as directed. |
| 33 | S&F 150 mm size, aluminium anodised , barrel tower bolts of extruded section & fixed completeall as specified and as directed. |
| 34 | S&F 150mm size aluminium handles, cast type, anodized and fixed complete all as specified and directed. |
| 35 | S&F 300 mm length of bolt, aluminium alloy, anodized,sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed. |
| 36 | S&F4 mm thick sheet glass, ordinary quality and glazing with oil putty in squares n exc 0.5 sq. m in each panecomplete all as specified and as directed |
| 37 | S&F Galvanised steel wire cloth. 0.56 mm nominal dia of wire and average width of aperture 1.18 mm fixed withsteel wire staples complete all as specified and directed. |
| 38 | S&F in repair galvanised steel wire netting 0.91 mm dia and 12 mm size of mesh for lathing, fixed with tinned of wire staples to wooden frame in all including all laps, cutting and waste complete all as specified and directed. |
| 39 | S&F MS chromium plated curtain rod 25 mm dia with and including MS chromium plated decorative round finials on either end provide a visually balanced appearance including MS chromium plated brackets fixed to wall with 30 mm wooden steel screws and PVC rawl plug, anchors, and installation as in repair complete all as specified andas directed by Engineer – in - Charge. |
| 40 | S&F Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips,complete all as specified and as directed. |
| 41 | All as per Item No.40 above,, but 5 mm dia and over upto and including 10 mm dia in stirrups, spacrs and binders.complete all as specified and as directed.. |
| 42 | S&F Mild Steel work in tubular trusses etc including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S. 1161-1979 grade St.-240 complete all as specified and directed. |
| 43 | S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework ofwater tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 44 | Dismantling of plain or corrugated steel sheeting any guage, thickness including Nanital or similar pattern roof coverings complete all as specified and as directed. |
| 45 | M&L for pre-painted hot dip aluminium-zinc alloy metallic coated corrugated steel sheet, any pattern corresponding to IS15965:2012 of durability class 3, atmospheric classification category 3, coating class AZ 150, 0.50mm thick of an approved colour and having yield strength of 550 MPa as in roof covering fixed with self tapping screws as specified including necessary scaffolding and safety measures at any floor complete all as specified and as directed |
| 46 | M&L for hot dip aluminium-zinc alloy metallic coated plain steel sheet as per IS 15965:2012 of durability class 3, atmospheric classification category 3, coating class AZ 150, 0.50mm thick of an approved colour and having yield strength of 550MPa as in ridge/valley/gutter/eaves boardings fixed with self tapping screws as specified including necessary scaffolding and safety measures at any floor complete all as specified and as directed. |
| 47 | Demolition of unreinforced cement concrete in ground floors and pavings n. exc 15 cm thickness (below or above ground level) removing debris beyond the premises complete all as specified and directed. |
| 48 | M&L PCC ( 1:3:6) type C-2 (using 40 mm gradedstone aggregate), as infoundations, bed concrete,filling sub base, surface channels and mass concrete,etc complete all as specified and directed. |
| 49 | M&L 50 mm thick PCC (1:3:6)type C-2 (using 40 mm graded stone aggregates) as in plinth protection etc, finishing cement concrete surface even and smooth with out using extra cement including making joints with hot bitumastic mix in proportion of bitumen and sand 1:2 complete all as specified and as directed.. |
| 50 | M & L 50 mm thick, plain cement concrete 1:3:6, type C-2, using 40 mm graded mechanically crushed stone aggregates, laid in 1:20 slope as in plinth protection/pavings/shafts including making joints at 3.00 metre intervals and at each corner, the joint shall be filled with mastic filling (to full depth) comprising of one part heated hot blown bitumen 85/ 25 & two parts heated sand (by volume), surface finished even and smooth without using extra cement, complete all as specified. Note: The concrete shall be laid at a stretch not exceeding 3 metre in length and width of joint shall not be more than 12 mm, complete as specified and directed. |
| 51 | M&L Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. including brushing neat cement slurry with 3.0 kg of cement per sqm complete all as specified and as directed. |
| 52 | M&L for coloured non skid joint free ceramic tiles of 7mm to 8mm thick area of each tile exceeding 0.11 Sqm but not exceeding 0.18 sqm in floors, etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed or bedding layer in CM (1:6) for laying floor finishes complete all as specified and directed. |
| 53 | M&L for glazed coloured ceramic tiles in vertical surface 450x300 x 6 to 7mmthick, set and jointed in neat cement slurry and pointed in white or colour cement to match the colour of tiles laid over & including 10 mm thick rendering as in backing wall plaster in CM (1:4) complete all as specified and directed. |
| 54 | Demolition of stone slabs and tiles laid bedded and pointed in any mortar of any description or thickness in floors, aprons etc. removing serviceable tiles to store and rubbish off the premises all complete all as specified and as directed. |
| 55 | M&L for Providing, PCC (1:2:4) type B1 using (20mm graded stone aggregate) as in roof kerbs or mud stops, rounded or chamfered on edgescomplete all as specified and directed. |
| 56 | M & L for Chequred cement corcrete tile cast in rouber moulded glossy finish of approved coloured general purpose of size 25cm x 25xm x 22 mm thick with mixture of white or grey cement in equql proportion and pigments, set, jointed and pointed in neat cement slurry in floor with and including 15mm thick screed bed or bedding layer in CM(1:6) complete all as specified and as directed. |
| 57 | Demolition of reed, lathing, single or double, including battens and plaster or chicken wire lathing complete all as specified and directed. |
| 58 | M&L Rendering 10.mm thick CM (1:6) on fair faces of brick work or concrete surfacesincluding finishing top even and faircomplete all as specified and as directed. |
| 59 | M&L Rendering 15 mm thick in CM (1:4) on fair faces of brick work or concrete surfacesincludingfinishing fair and evencompleteall as specified and directed. |
| 60 | M&L Rendering 15 mm thick in CM (1:4) on fair faces of brick or concrete surfaces in two layers 5 mm thick finishing layer over 10 mm thick backing layerfinished fair and even with mixing water proofing compound to top layer as per manufacturers instruction complete all as specified and directed. Note: WPC will be measured separetely. |
| 61 | Supply only Integral water proofing compound of approval brand complete all as specified and directed. |
| 62 | M&L for complete removal of existing treatment on old plastered surfaces of walls and preparing surfaces as directed by applying thin layer of wall care putty of 1 to 2mm thick and finally applying two coats of distemper oil emulsion over primer complete all as specified and directed. |
| 63 | M&L Preparation of new plastered surfaces of walls andapplying three coats of white wash complete all as specified and directed. |
| 64 | M&L Preparation of old plastered surfaces in ceilings and applying two coats of white wash complete all as specified and directed. |
| 65 | M&L Preparation of old plastered surfaces in ceilings and applying one coat of white wash complete all as specified and directed. |
| 66 | M&L Preparation of new plastered surfaces of walls andapplying two coats of cement base paint complete all as specified and directed. |
| 67 | M&L Prepration of newly plastered surface of walls and applying two coats of cement base paint over a coat of primer complete all as specified and directed. |
| 68 | M&L Preparation of old painted or plastered surfaces of walls etc by washing, rubbing down and applying one coat of cement base paint complete all as specified and directed.. |
| 69 | M & L for preparation of new plastered surfaces of wall and applying two coats of distemper oil emulsion over a coat of primer complete all as specified and directed. |
| 70 | M&L Preparation of new wood & wood basd surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed. |
| 71 | M&L Preparation ofoldwood & wood based surfaces of any description, not otherwise described, over 10cm width or girth and applyingtwo coat of synthetic enamel paint complete all as specified and directed. |
| 72 | M&L Preparation of new or previously un treated steel surfaces of any description, over 10 cm width or girth, not otherwise described and evenly applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 73 | S&F 15 mm dia bore of pipes, (medium grade), galvanised iron, with all fittings and fixed complete to walls and ceiling or laid in floors completeall as specified and directed. |
| 74 | S&F 20 mm dia bore of pipes, (medium grade), galvanised iron, with all fittings and fixed complete to walls and ceiling or laid in floors completeall as specified and directed. |
| 75 | S&F Vitreous china wash down watercloset, "Orissa pattern, size, 580x440mm white, with integral foot rest (excluding flushing cistern and flush pipe) but including provision of P or S trap embedded in cement concrete bedding,etccompleteall as specified and directed. |
| 76 | S&F, Wash basins white, vitreous China, flat back, size 580x450mm,excluding taps, waste, chain and plug and porcelain stopper but including bracketsfixed to wall complete all as specified and directed. |
| 77 | S&F Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) Vitreous China urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement; , grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe)complete all as specified and as directed. |
| 78 | S&F PVC High/Low level flushing cistern 10 litres capacity including all fittings i.e float valve, syphon,flush pipe, brackets,etc completeall as specified and directed. |
| 79 | S&F PVC connection 15mm size with PTMT nuts of length 600mm completeall as specified and directed. |
| 80 | S&F 15mm dia Bib taps,fancy type long bodycast copper alloy,chromium plated screwed down to iron pipe or for brass ferrule & fixed completeall as specified and directed. |
| 81 | S&F 15 mm dia pillar taps,fancy type swan long necksuitable for countershunk basin, cast copper alloy with capstan heads,chromium plated , screwed down high pressure, with or without lettered "Hot" or "Cold" with long screwed shanks & fly nuts, screwed for ironpipe & fixed completeall as specified and directed. |
| 82 | S&F 15mm bore dia angle valves, cast copper alloy, fancy type, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 83 | S&F 40 mm Low density polyethylene (LDPE) pipes of pressure rating 6 kgf/sqm as in waste water pipes complete fixed all as specified and directed. |
| 84 | S&F32mm waste coupling of PTMT (half or full threaded) (minimum weight 40mm-60 gms) fixed complete all as specified and as directed. |
| 85 | S&F Rotational moulded polyethylene water storage tanks of 1000 Ltrs capacity,(cylindrical vertical with closed top) double layered hoisted and fixed in position all as specified in SSR part-I and as directed by Eng-in-charge. |
| 86 | S&F 20 mm dia ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball, screwed for iron pipe & fixed (Minimum weight 210 gms) complete all as specified and directed. |
| 87 | S&F600 mm x 450 mm looking mirror of selected quality glass, mounted on 4mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers fixed complete all as specified and as directed. |
| 88 | M&L 75mm dia PVC (SWR) floor trap/nahani trap, plain with grating including jointing with solvent cement in repair complete all as specified and directed. |
| 89 | S&F PVC (SWR) pipes 110mm diasingle socketed, in any length with rubber ring joints, laying in trenches/floors complete all as specified and as directed. |
| 90 | S&F PVC (SWR) pipes 75mm diasingle socketed, in any length with rubber ring joints, fixed to wallscomplete all as specified and as directed. |
| 91 | S&F PVC (SWR) pipes 75mm diasingle socketed, in any length with rubber ring joints, laying in trenches/floors complete all as specified and as directed. |
| 92 | S&F PVC (SWR) bends 110mm dia any radius all as specified and directed. |
| 93 | S&F PVC (SWR) bends 75mm dia any radiusall as specified and directed. |
| 94 | S&F 75 mm dia PVC (SWR) vent cowl fixed with pipe complete all as specified and directed. |
| 95 | S&F PVC (SWR) pipes 160 mm diasingle socketed, in any length with rubber ring joints, laid on trenches/floorsrepair complete all as specified and as directed. |
| 96 | Material and labour for Point wiring with 1.5 Sqmm copper conductor unsheathed, multistranded, PVC insulated, single core cable FRLSHwith earth continuity conductor of 1.5 sqmm PVC insulated copper conductor and including concealed type rigid PVC conduit of suitable size but not less than 20mm dia. and allaccessories fixed to the surface of the roof/ walls etc., including terminal boxes made out of MS sheet of thickness should be not lessthan 1.2mm thickfor fixing of switches, fan regulators socket outlet etc along-with 3mm thick top laminated bakelite sheet for housing switches etc, complete all as specified and as directed for One light /Fan /Ex Fan point controlled by one, one way switch complete all as specified and directed. |
| 97 | All as per Item No.96 above,but One socket outlet 3 or 5 Pin, 6 Amp on same board,complete all as specified and directed. |
| 98 | All as per item No 96 above,but with 2.5 sqmm copper cable in and including concealed type rigid PVC conduitfor socket outlet 3 or 6 pin 15 Amps.complete all as specified and directed. |
| 99 | S&F Switch piano flush button, single pole, one way 5 Amp complete all as specified and directed. |
| 100 | S&F Socket outlet, 2 in 1, 5 pin 5 Amp flush type complete all as specified and directed. |
| 101 | S&F Switch socket combination, 5 in 1, multipurpose 5/15 Amps flush type universal complete all as specified and directed. |
| 102 | S&F Ceiling rose, 3 terminals, surface bakelite, /PVC/ Polycarbonate,.complete all as specified and directed. |
| 103 | S&F MCB single pole (SP) 6 to 32 Amp 240 Volts 10 KA "C" series with all incoming/outgoing connection with proper size lugscomplete all as specified and directed. |
| 104 | S&F MCB single pole and neutral (SP&N) 32 Amp 240 volts 10 KA "C" series with all incoming/outgoing connections with proper size lugs complete all as specified and directed. |
| 105 | S&F Single pole and neutral DB wall mounting type, 240 Volts, 4 Way with 200 Amps rated bus bar, double door suitable for fixing MCB"scomplete all as specified and directed. |
| 106 | S&F LED tube light fitting 4 ft. 1 x 18/20 watt with 230 volts AC, complete with all accessories internally pre-wired and fixed to walls/ceiling with screw including connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and directed. |
| 107 | S&F LED building security light fitting 1 x 35 Watt new generation energy saving and environmental friendly long life LED street light made up of pressure diecast aluminium housing with high power LED as lighting source and lens embedded PC cover having top opening seperate driver compartment with IP65 protectionincl mounting bracket of suitable size and connection complete all as specified and directed. |
| 108 | S&F Exhaust fans with louvers 300 mm sweep, 1440 RPM, Heavy duty single phase 240 Volts, AC 50 Hz, steel body and connecting up including louvers including making necessary opening on stone /brick masonry wall of suitable size, finishing it properly and provision of cable 3 core of suitable size from ceiling rose to fan complete all as specified and as directed. |
| 109 | S&F Electric water heater (Geyser) storage type steel body with anti-corrosive inner tank and heating element upto 2 kw capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV &CP connection complete all as specified and directed. |
| 110 | M&L for brick protection over cables inside the trench by using common burnt clay building bricks,sub-class"B" laid dry and flat and width wise along the axis of the trench complete all as specified and as directed by Engineer-in-Charge. |
| 111 | M&Lfor sand cushioning in cable trenches over & under the cables, with river washed coarse sand, as per standard practice with proper compaction complet all as specified anddirected by Engr-in-Charge. Note:Punned thickness shall be considered for payment. |
| 112 | Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sq mm 2 core, complete all as specified and directed. |
| 113 | Supply and laying 40 mm dia GI tubing (light grade)with all fittings (ISI Marked) laid in trenches/fixed on pole/wallcomplete all as specified and directed. |
| 114 | M&L Boring of holes under road, pavement, hard standing by using trenchless technology for passing the cable through GI pipe complete all as specified and directed by Engr -in-Charge. Note: GI Pipe shall be measred and paid seperately. |
| 115 | M&L Cutting existing steel tubing for alteration or addition (each cut measured ) bore of pipe 40 mm / 50 mm /80mm complete all as specified and directed. |
| 116 | M&L Screwing existing steel tubing for alterations or additions (or lengthening screw on pipe to form connector)complete all as specified and directed. |
| 117 | S&F GI water tubing, 25 mm dia (medium grade) including fittings/accessories like sockets, bend, elbow, union etc laying in trenches/wall/road complete all as specified and directed. |
| 118 | S&F GI water tubing, 20 mm dia (medium grade) including fittings/accessories like sockets, bend, elbow, union etc laying in trenches/wall/road complete all as specified and directed. |
| 119 | M&LGunmetal globe/gate valve of size 25 mm bore, ISI marked, with iron wheel head, screwed both ends complete all as specified and directed. |
| 120 | M&LGunmetal globe/gate valve of size 20 mm bore, ISI marked, with iron wheel head, screwed both ends complete all as specified and directed. |
| 121 | M & L Brick valve chamber of internal size 90 cm x 90 cm x 90 cm by using brick masonry with with 23 cm thick wall in CM (1:6) including excavation, earth work in any strata,75 mm thick PCC (1:4:8) foundation type D-2 (using 40 mm graded stone aggregate),including 20 mm thick PCC (1:2:4) type B1(using 20 mm graded stone aggregate) on top of brick walls and plastering the internal and external surfaces with 10 mm thick CM (1:4), providing 3.15 mm MS sheet chamber cover double opening arrangement center lock system with40x40x6mm angle iron frame duly painted with two coast of black bituminous paint over one coat of red oxide primer complete all as specified and directed by Eng-in-charge. |
| 122 | Material and labour for earthing complete with galvanized steel earth plate electrode 600 mm x 600 mm x 6 mm buried directly in ground vertically to a depth not less than 2.25 meter below normal ground level (with top edge of earth plate not less than 1.5 meter below ground level) connected to galvanized iron earth lead wire 4mm dia, (main earthing lead ) by means of galvanized bolts, nuts and washers all as shown in electrical plate No 3 of MES Schedule Part-I (2009) with connected to earth test point & to main switch board with & including adequate quantity of charcoal dust and common salt alround earth plate & 15 mm dia GI pipe light grade for earth lead protection pipe for suitable length and GI pipe 20 mm dia light grade for watering pipe with funnel & wire meshincluding necessary earth work and PCC (1: 3 : 6) type C-1 for earth pit and 40 mm thick pre-cast RCC cover ( 1 : 2 : 4) type B1 (using 20 mm graded stone aggregate)with 3 Nos 8 mm dia TMT bars both ways and testing on completioncompleteall as specified and directed by Engineer-in-Charge. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
