Tender For Installation Of A New 100 Kva Dtr At Thengumvila By Stringing Ht Covered Conductor, Sooranad Under Esd Sasthamcotta On Turnkey Basis, Sooranad-Kerala

TDR : 38909867

Tender Notice
BOQ

Expired

Sooranad , Kerala

Tender Brief : Tender For Installation Of A New 100 Kva Dtr At Thengumvila By Stringing Ht Covered Conductor, Sooranad Under Esd Sasthamcotta On Turnkey Basis

Document Fees
₹ 5900 /-

EMD
₹ 71700.0 /-

Tender Value
₹ 47.79 Lakhs /-

Submission Date
11-08-2023

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	MATERIALS
2	Hardware Fittings-GI-for HT covered conductor 120 sq.mm
3	Pin Insulator 11kV Composite polymeric
4	Insulator Tie for Covered Conductor
5	Disc insulator 11 Kv composite polymeric-covered conductor
6	Covered conductor HT 70 sqmm
7	Insulation piercing connector set for covered conductor HT
8	Mid span joint set forcovered conductor HT
9	Single core outdoor termination kit for covered conductor
10	Lightning arrester 9 Kv,10 KA( Distribution class) composite polymer Housing
11	LABOUR
12	Fitting and erecting one HT A type pole in position incl. Fitting across arm,digging & back filling pit,drawing earth leads.
13	Additional rate for providing one disc set on any type of HT pole for making cut point.
14	Fitting one Additional V cross arm in existing single pole incl. Conveyance of materials.
15	Fitting one Additional 75 x 40 mm,1.8m channel cross arm in existing single pole incl.conveyance of materials.
16	Loading HT A type pole from the stacking place and unloading the same at work site ( transport by vehicle)
17	Drilling hole of various sizes on existing channel/cross arm.
18	Additional rate for refitting/redoing one disc set while renewing any type of 11 kV cut pole
19	Fitting one Additional 2.4m/3m channel cross arm ( 100x50x6mm),in existing 11 Kv DP incl.conveyance of materials.
20	Fitting one LT 2 line cross arm on HT or LT existing poles incl.fitting insulators and binding the same with LT Line.
21	Fitting one LT 4 line cross arm on HT or LT existing poles incl.fitting insulators and binding the same with LT Line.
22	Dismantling one damaged LT PSC/RCC poleafter disconnecting stays,strut etc. and stacking the same.
23	Dismantling ( without damage) one LT PSC/RCC strut pole after disconnecting stays,strut etc.and stacking the same.
24	Dismantling ( without damage) one LT PSC/RCC strut pole incl.removal of clamps and stacking.
25	Dismantling one section fuse.
26	Additional rate for refitting/redoing one shackle set and reshackling one span while renewing any type of pole.
27	Transferring LT 3ph 4/5 wire OH line to newly erected HT/LT pole and refitting all items to the new pole.
28	Dismantling and reconnecting Sph service connection from the OH line incl. Lowering down the WP portion.
29	Dismantling and reconnecting 3ph service connection from the OH line incl.lowering down the WP portion.
30	Fitting one No.Section fuse on LT line with dropping cables,crimping sockets,connecting with bolt & nut etc.
31	Dismantling one ordinary street light/CFL/LED fitting from existing pole and refitting the same on newly erected pole and reconnecting.
32	Pole numbering using printed Aluminium sheets/Painting the surface of pole with antialgal yellow paint and painting Letters with black paint as specified incl.cost of paint.
33	Providing concrete muffing ( 0.45x0.45x1.5m) inclusive of cost of all material ( as per specification).
34	Fitting and providing one HT stay for 11kV pole incl. Digging & back filling pit.
35	Stringing of one km 3 PH 11 kV line with XLPE Insulated ACSR Raccoon.
36	Dismantling ( without damage) one km 11 kV line ( 3 conductors) ,cross arm,insulators,disc,rolling the conductor and stacking.
37	Fitting one set (3 No .) 11 kV LA and giving connections excluding earthing
38	Doing straight joint on cables of sizes upto and incl. 3X185 sqmm using the cable jointing kit supplied departmentally as per specification.
39	Doing one cable end termination on cables of sizes upto and incl.3x185 sqmm using the cable jointing kit supplied departmentally.
40	Installation of insulation piercing connector for main to service line main : 25-95 sqmm, Tap: 25-95 sqmm.
41	Transporting poles by hired vehicle to a distance upto 5km and carrying upto 4 poles excluding loading & unloading
42	Providing one Coil Earth using GI earth wire,digging separate pit at standard distance away from the pole/structure & backfilling.
43	Providing one Earth using earth pipe incl. Digging & backfilling pit and supply of charcoal,salt,sand etc.
44	Fitting one set AB Switch and giving connection .
45	Fitting and erecting one HT DP using A type pole in position incl. Fitting 2 channel cross arms, digging & back filling pit,drawing earth leads.
46	Fitting and providing one strutusing HT PSC pole incl. Digging & back filling pit.
47	Loading HT PSC pole from the stacking place and unloading the same at work site( transport by vehicle).
48	Erecting one 100 KVA Transformer to existing DP and giving connections ,incl. Loading & unloading, excluding transportation
49	Fitting one additinal Fuse unit and giving connection from Transformer to fuse and DB to LT OH line.
50	Fitting 5 channel cross arms,AB switch,DO fuse,LA,HT & LT connections on existing DP,3 LT fuses.

Need a Bussiness Loan? Apply Now!
Buy Digital Signature
Bidding Support

Also Visit

Tenders

Kerala Tenders

Electrical Industry Tenders

Electrical Work Tenders

Electrification Work Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Installation Of A New 100 Kva Dtr At Thengumvila By Stringing Ht Covered Conductor, Sooranad Under Esd Sasthamcotta On Turnkey Basis, Sooranad-Kerala

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Sl. No.	Item Description
1	MATERIALS
2	Hardware Fittings-GI-for HT covered conductor 120 sq.mm
3	Pin Insulator 11kV Composite polymeric
4	Insulator Tie for Covered Conductor
5	Disc insulator 11 Kv composite polymeric-covered conductor
6	Covered conductor HT 70 sqmm
7	Insulation piercing connector set for covered conductor HT
8	Mid span joint set forcovered conductor HT
9	Single core outdoor termination kit for covered conductor
10	Lightning arrester 9 Kv,10 KA( Distribution class) composite polymer Housing
11	LABOUR
12	Fitting and erecting one HT A type pole in position incl. Fitting across arm,digging & back filling pit,drawing earth leads.
13	Additional rate for providing one disc set on any type of HT pole for making cut point.
14	Fitting one Additional V cross arm in existing single pole incl. Conveyance of materials.
15	Fitting one Additional 75 x 40 mm,1.8m channel cross arm in existing single pole incl.conveyance of materials.
16	Loading HT A type pole from the stacking place and unloading the same at work site ( transport by vehicle)
17	Drilling hole of various sizes on existing channel/cross arm.
18	Additional rate for refitting/redoing one disc set while renewing any type of 11 kV cut pole
19	Fitting one Additional 2.4m/3m channel cross arm ( 100x50x6mm),in existing 11 Kv DP incl.conveyance of materials.
20	Fitting one LT 2 line cross arm on HT or LT existing poles incl.fitting insulators and binding the same with LT Line.
21	Fitting one LT 4 line cross arm on HT or LT existing poles incl.fitting insulators and binding the same with LT Line.
22	Dismantling one damaged LT PSC/RCC poleafter disconnecting stays,strut etc. and stacking the same.
23	Dismantling ( without damage) one LT PSC/RCC strut pole after disconnecting stays,strut etc.and stacking the same.
24	Dismantling ( without damage) one LT PSC/RCC strut pole incl.removal of clamps and stacking.
25	Dismantling one section fuse.
26	Additional rate for refitting/redoing one shackle set and reshackling one span while renewing any type of pole.
27	Transferring LT 3ph 4/5 wire OH line to newly erected HT/LT pole and refitting all items to the new pole.
28	Dismantling and reconnecting Sph service connection from the OH line incl. Lowering down the WP portion.
29	Dismantling and reconnecting 3ph service connection from the OH line incl.lowering down the WP portion.
30	Fitting one No.Section fuse on LT line with dropping cables,crimping sockets,connecting with bolt & nut etc.
31	Dismantling one ordinary street light/CFL/LED fitting from existing pole and refitting the same on newly erected pole and reconnecting.
32	Pole numbering using printed Aluminium sheets/Painting the surface of pole with antialgal yellow paint and painting Letters with black paint as specified incl.cost of paint.
33	Providing concrete muffing ( 0.45x0.45x1.5m) inclusive of cost of all material ( as per specification).
34	Fitting and providing one HT stay for 11kV pole incl. Digging & back filling pit.
35	Stringing of one km 3 PH 11 kV line with XLPE Insulated ACSR Raccoon.
36	Dismantling ( without damage) one km 11 kV line ( 3 conductors) ,cross arm,insulators,disc,rolling the conductor and stacking.
37	Fitting one set (3 No .) 11 kV LA and giving connections excluding earthing
38	Doing straight joint on cables of sizes upto and incl. 3X185 sqmm using the cable jointing kit supplied departmentally as per specification.
39	Doing one cable end termination on cables of sizes upto and incl.3x185 sqmm using the cable jointing kit supplied departmentally.
40	Installation of insulation piercing connector for main to service line main : 25-95 sqmm, Tap: 25-95 sqmm.
41	Transporting poles by hired vehicle to a distance upto 5km and carrying upto 4 poles excluding loading & unloading
42	Providing one Coil Earth using GI earth wire,digging separate pit at standard distance away from the pole/structure & backfilling.
43	Providing one Earth using earth pipe incl. Digging & backfilling pit and supply of charcoal,salt,sand etc.
44	Fitting one set AB Switch and giving connection .
45	Fitting and erecting one HT DP using A type pole in position incl. Fitting 2 channel cross arms, digging & back filling pit,drawing earth leads.
46	Fitting and providing one strutusing HT PSC pole incl. Digging & back filling pit.
47	Loading HT PSC pole from the stacking place and unloading the same at work site( transport by vehicle).
48	Erecting one 100 KVA Transformer to existing DP and giving connections ,incl. Loading & unloading, excluding transportation
49	Fitting one additinal Fuse unit and giving connection from Transformer to fuse and DB to LT OH line.
50	Fitting 5 channel cross arms,AB switch,DO fuse,LA,HT & LT connections on existing DP,3 LT fuses.

Tender For Installation Of A New 100 Kva Dtr At Thengumvila By Stringing Ht Covered Conductor, Sooranad Under Esd Sasthamcotta On Turnkey Basis, Sooranad-Kerala

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us