Andaman And Nicobar Islands Medical Education and Research Society-ANIMERS has published Tender For Repair And Renovation Of Jarawa Ward Ground Floor At G.B. Pant Hospital, Port Blair.. Submission Date for this Tender is 10-08-2023. Flooring Work Tenders in Port Blair Andaman And Nicobar Islands. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | Supplying chemical emulsion in sealed containers including delivery as specified. |
2 | Chlorpyriphos emulsifiable concentrate of 20% |
3 | Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) : |
4 | Treatment of soil under existing floors using chemical emul- sion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor: 2.1.1) With Chlorpyriphos E.C. 20% with 1% concentration |
5 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). |
6 | Centering and shuttering including strutting, propping etc. and removal of form for |
7 | Shelves (Cast in situ) |
8 | Lintels, beams, plinth beams, girders, bressumers and cantilevers |
9 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. |
10 | Thermo-Mechanically Treated bars of grade Fe-500D or more. |
11 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
12 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick : |
13 | Float glass panes 7.1.1)4 mm thick glass pane (weight not less than 10kg/sqm). |
14 | Fly proof stainless steel grade 304 wire gauge with 0.5 mm dia. wire and 1.4mm wide aperture with matching wood beading |
15 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. |
16 | Fixed to steel windows by welding |
17 | Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete : |
18 | 100x58x1.90 mm |
19 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : |
20 | 150x10 mm |
21 | 100x10 mm |
22 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : |
23 | 125 mm |
24 | 100mm |
25 | Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance ±1mm),with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame to be Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturer’s specification and direction of Engineer- in-charge |
26 | Extruded section profile size 42x50 mm |
27 | 30 mm thick factory made Polyvinyl Chloride (PVC) door shutter made of styles and rails of a uPVC hollow section of size 60x30 mm and wall thickness 2 mm (± 0.2 mm), with inbuilt decorative moulding edging on one side. The styles and rails mitred and joint at the corners by means of M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 25x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of "H" section, a uPVC hollow section of size 100x30 mm and 2 mm (± 0.2 mm) wall thickness fixed to the shutter styles by means of plastic/ galvanised M.S. "U" cleats. The shutter frame filled with a uPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness . The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer"s specification and direction of Engineer-in-charge. |
28 | Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), jointing with grey cement slurry @ 3.3kg/ sqmincluding grouting the joints with white cement and matching pigments etc., complete. |
29 | Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface : |
30 | Water thinnable cement primer |
31 | Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade : |
32 | Two or more coats on new work |
33 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
34 | Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade: |
35 | One or more coats on old work |
36 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : |
37 | One or more coats on old work |
38 | Finishing walls with Acrylic Smooth exterior paint of required shade : |
39 | Old work (One or more coat applied @ 0.90 ltr/10 sqm). |
40 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. |
41 | For thickness of tiles 10 mm to 25 mm |
42 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. |
43 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: |
44 | White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests |
45 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: |
46 | White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap |
47 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. |
48 | Flexible pipe 25.1.1) 32 mm dia |
49 | Providing and fixing 600x450 mm beveled edge mirror of superiorglass (of approved quality) complete with 6 mm thick hard boardground fixed to wooden cleats with C.P. brass screws and washerscomplete. |
50 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. |
51 | 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms. |
52 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls. |
53 | 20 mm nominal dia Pipes |
54 | Providing and fixing uplasticised PVC connection pipe with brass unions : |
55 | 45 cm length 29.1.1) 15 mm nominal bore |
56 | Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : |
57 | 150 mm diameter |
58 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : |
59 | 15 mm nominal bore |
60 | Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. |
61 | 15 mm nominal bore |
62 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 |
63 | 15mm nominal bore |
64 | Providing and fixing PTMT grating of approved quality and colour. |
65 | Circular type 34.1.1)100 mm nominal dia |
66 | Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms. |
67 | Providing, mixing and applying SBR polymer (of approved make) modified Cement mortar in proportion of 1:4 (1 cement: 4 graded coarse sand with polymer minimum 2% by wt. of cement used)as per specifications and directions of Engineer-in-charge. Note: Measurement and payment: The pre-measurement of thickness shall be done just after the surface preparation is completed and Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding / tapping with a blunt metal instrument and/or the 75mm size cube crushing strength at the end of 28 days to be not less than 30 N/Sqmm2). |
68 | 12 mm average thickness. |
69 | Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever), with all fittings and fixtures complete. (Make Parryware Item Code E8109 Economy White orequivalent) |
70 | 10 litre capacity - White |
71 | Providing and fixing UPVC Nahani trap with jali including cost of cutting and making good the walls and floors of approved quality etc. as per direction of Engineer-in-Charge. |
72 | 110 x 75 mmdia |
73 | Providing and fixing C.P Shower Arm 15 mm dia nominal bore, 1/2"" BSP thread 195 mm Long with a bend of 45 degree (effective length of 210 mm) . |
74 | Providing and fixing UPVC (SWR) soil, waste and vent pipes (working pressure 6kg/sqcm) including jointing with solvent. |
75 | 75mm dia |
76 | Providing and fixing plain lining with necessary screws/nuts and bolts/nails fixed on wooden/steel frame work, applying priming coat (wood primer) complete as per direction of Engineer-in-charge. |
77 | 19 mm thickplywood conforming to IS:710. |
78 | Providing and fixing1mm thick sunmica (any colour) on cupboardshutter front side and the edge covered with decorative beadingincluding cost of all materials complete as per direction of Engineer-in-charge. |
79 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length. |
80 | Superier Hard wood CatII A |
81 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note:- Butt hingesand necessary screwsshall be paid separately) |
82 | Superier Hard wood CatII A 44.1.1)35 mm thick shutters |
83 | Cleaning tiles with diluted hydrochloric acid including removing grout from tiles joints etc. complete as per the direction of Engineer-in-charge. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail