Tender For Repair And Renovation Of Labour Ward And Labour Ot, At G.B. Pant Hospital Port Blair.
Tender Value
9.24 Lakhs
Estimated cost
Bid Submission
10 Aug 2023
0 days left
EMD
18493
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Port Blair → Andaman And Nicobar Islands
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Repair And Renovation Of Labour Ward And Labour Ot, At G.B. Pant Hospital Port Blair.
BOQ
| Sl. No. | Item Description |
| 1 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : |
| 2 | 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 3 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 4 | Providing and fixing ISI marked IS: 453 oxidised M.S. double acting spring hinges with necessary screws etc. complete. (copper oxidized as per IS: 1378) |
| 5 | 150 mm |
| 6 | Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete : |
| 7 | 100X58X1.90 mm |
| 8 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : |
| 9 | 100x10 mm |
| 10 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : |
| 11 | 100mm |
| 12 | Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance ±1mm),with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame to be Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturer’s specification and direction of Engineer- in-charge. |
| 13 | Extruded section profile size 42x50 mm |
| 14 | 30 mm thick factory made Polyvinyl Chloride (PVC) door shutter made of styles and rails of a uPVC hollow section of size 60x30 mm and wall thickness 2 mm (± 0.2 mm), with inbuilt decorative moulding edging on one side. The styles and rails mitred and joint at the corners by means of M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 25x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of \"H\" section, a uPVC hollow section of size 100x30 mm and 2 mm (± 0.2 mm) wall thickness fixed to the shutter styles by means of plastic/ galvanised M.S. \"U\" cleats. The shutter frame filled with a uPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness . The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer\"s specification and direction of Engineer-in-charge. |
| 15 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. |
| 16 | Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface : |
| 17 | Water thinnable cement primer |
| 18 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 19 | Finishing walls with Acrylic Smooth exterior paint of required shade : |
| 20 | New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) |
| 21 | Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade: |
| 22 | One or more coats on old work |
| 23 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : |
| 24 | One or more coats on old work |
| 25 | French spirit polishing : |
| 26 | One or more coats on old work |
| 27 | Repair to plaster of thickness 12mm to 20 mm in patches of area 2.5 sqm and under, including cutting the patch in proper shape, raking out joints and preparing plastering the wall surface with white cement based polymer modifiedself curing mortar, including disposal of rubbish, all completeas per the direction of Engineer-In-Charge. |
| 28 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. |
| 29 | Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) |
| 30 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. |
| 31 | For thickness of tiles 10 mm to 25 mm |
| 32 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: |
| 33 | White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests |
| 34 | Providing and fixing white vitreous china pedestal type water closet(European type W.C. pan) with seat and lid, 10 litre low level whiteP.V.C. flushing cistern, including flush pipe, with manually controlleddevice (handle lever), conforming to IS : 7231, with all fittings andfixtures complete, including cutting and making good the walls andfloors wherever required : |
| 35 | W.C. pan with ISI marked white solid plastic seat and lid |
| 36 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: |
| 37 | White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap |
| 38 | Providing and fixing P.V.C. waste pipe for sink or wash basin includingP.V.C. waste fittings complete. |
| 39 | Flexible pipe22.1.1) 32 mm dia |
| 40 | Providing and fixing 600x450 mm beveled edge mirror of superiorglass (of approved quality) complete with 6 mm thick hard boardground fixed to wooden cleats with C.P. brass screws and washerscomplete. |
| 41 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. |
| 42 | 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms. |
| 43 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls. |
| 44 | 20 mm nominal dia Pipes |
| 45 | 25 mm nominal dia Pipes |
| 46 | Providing and fixing uplasticised PVC connection pipe with brass unions : |
| 47 | 45 cm length26.1.1) 15 mm nominal bore |
| 48 | Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : |
| 49 | 150 mm diameter |
| 50 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : |
| 51 | 15 mm nominal bore |
| 52 | Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. |
| 53 | 15 mm nominal bore |
| 54 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 |
| 55 | 15mm nominal bore |
| 56 | Providing and fixing PTMT grating of approved quality and colour. |
| 57 | Circular type31.1.1)100 mm nominal dia |
| 58 | Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms. |
| 59 | Providing and fixing PVC Nahani trap with jali incliding cost of cutting and making good the wall & floors of approved quality etc. as per direction of Engineer-in-charge. |
| 60 | 110 x 75mm dia |
| 61 | Providing and fixing C.P Shower Arm 15 mm dia nominal bore, 1/2\"\" BSP thread 195 mm long with a bend of 45 degree (effective length of 210 mm) . |
| 62 | Providing and fixing UPVC soil,waste and vent pipe (Working pressure 6 kg/sqcm) including jointing with seal ring. |
| 63 | 110 mm Dia |
| 64 | Providing and fixing PVC moulded fittings and accessories for UPVC pipe (working pressure 6kg/sqm) i/c joining with seal ring. |
| 65 | 110 mmDoor bend |
| 66 | Providing and fixing PVC moulded fittings and accessories for UPVC pipe (working pressure 6kg/sqm) i/c joining with seal ring. |
| 67 | 110 mm Plain bend |
| 68 | Providing and fixing PVC moulded fittings /Accessories for PVC pipe including joining with seal ring leaving 10 mm gap for thermal expansion. |
| 69 | UPVC single equal Tee (with door)38.1.1) 75x75x75 mm |
| 70 | Providing and Fixing CP Brass Health Faucet of make Jaquar or equivalent (Code No: ALD-BLK-583) of good as per the direction of Engineer-in-charge. |
| 71 | Providing and fixing CPVC ball valve of approved quality. |
| 72 | 20mm nominal bore. |
| 73 | Providing and fixing CP Brass Two way bib cock of approved quality as per direction of Engineer-in-charge. |
| 74 | 15 mm nominal bore |
AI Tender Summary
Tender Timeline
Jul 31, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedAug 10, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedAug 11, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender