Tender For Construction Of Bt Road From Barloot To Sarneshwwarji Temple Km 0/0 To 1/200
Tender Value
1.14 Crore
Estimated cost
Bid Submission
07 Aug 2023
0 days left
EMD
2.28 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
sirohi → Rajasthan
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Bt Road From Barloot To Sarneshwwarji Temple Km 0/0 To 1/200
BOQ
| Sl. No. | Item Description |
| 1 | Clearing and grubbing road landincluding uprooting rank vegetation, grass, bushes, shrubs, saplingsand trees girth upto 300 mm, removal of stumps of trees cut earlierand disposal of unserviceable materials and stacking of serviceable material upto a lead of 1000m including removal and disposal of top organic soil not exceeding in 150 mm thickness as per MORTH specification clause 201 By mechanical Means .A. In area ofthorny jungle |
| 2 | Earth work in excavation, including stacking/disposal of surplus material with all lifts and lead upto 495 metres, exclusive of compensation of earth [MoRTH specification : Clause 301 to 305] In Hard Soil When excavation and loading is done mechanically using Bull Dozar, F.E.Loader and carriage is done by tipper/dumper (6T capacity). |
| 3 | Extra for laying earth as per specification for compaction in 200 mm thick loose layers and dressing [MoRTH Specification Clause 305.3.5]. BY MECHANICAL MEANS, using Motor Grader, from earth in stock piles with all lead and lift but excluding rolling and watering. |
| 4 | Extra for watering the earth to bring the earth upto required O.M.C excluding rolling & Extra for rolling to specification with Power Roller, 8-10 tonne when earth is at suitable moisture content with dry field density not less than 100 % of maximum dry density (Ordi-nary Procter test).excluding watering. |
| 5 | Providing laying, spreading and compacting specified graded crushed stone in sub-base course including premixing the material at OMC in wet mix plant, carriage of mixed material, laying in uniform layers with motor grader, F.E.loader on a prepared surface and compacting with vibratory compactorto achieve the desired density including all material, labour, mach-nery, lighting barricading and maintenance of diversion complete.[MoRTH specification Clause 401] includiong 20 Km lead . For Grading II Material |
| 6 | Providing and laying granular sub-base material having P.I.not more than 6, including spreading in layers not exceeding 150 mm compacted thicknessand consolidation by 8-10 tonne power rollerto required camber and grade including cost of water and hire charges of machinery, including T&P with all lead (Compacted thickness to be measured).as per MORTH specification table 400-1, 400-2 :For grading-III with CBR value not less than 20.to attain 100% proctor density. |
| 7 | Providing, laying, spreadingand compactingstone aggregate of specfic as per table 400-7 to Water Bound Macadam specification including spreading in uniform thickness, hand packing roll-ing with vibratory rollerin stages to proper grade and camber, applying and brooming requisite type of screening and binding materials to fill-up the interstices of coarse aggregates watering (with water browser) and rolling making necessary earthen bund to protect edegs, lighting, guarding, barricading and maintenance of diversion etc. [MoRTH specfication : Clause 404] ( By manual means). Grading II , 63 mm to 45 mm@ 0.91 cum per 10 Sqm for compacted thickness of 75 mm.(Crusher broken)screening type \"B\" |
| 8 | Providing, laying, spreadingand compactingstone aggregate of specfic as per table 400-7 to Water Bound Macadam specification including spreading in uniform thickness, hand packing roll-ing with vibratory rollerin stages to proper grade and camber, applying and brooming requisite type of screening and binding materials to fill-up the interstices of coarse aggregates watering (with water browser) and rolling making necessary earthen bund to protect edegs, lighting, guarding, barricading and maintenance of diversion etc. [MoRTH specfication : Clause 404] ( By manual means). Grading III,53 mm to 22.4 mm, @ 0.91 cum per 10 Sqm for compacted thickness of 75 mm.(Crusher broken) screening type \"B\" |
| 9 | Providing and applying primer coat over prepared surface or granular base with bitumen emulsion as per IS: 8887 & manufacturer’s specifications @ 8.5 kg /10 sqm with a self propelled of towed bitumen pressure sprayer equipped for spraying the material uniformly at specified rates and temperatures as per MORTH specification CI 502,112 ( Including cleaning of road surface ) |
| 10 | Providing and applying tack coat on the prepared surface ,withbitumen emulsion as per IS : 8887 & manufacturer’s specifications @ 2.75 kg /10sqm. With a self propelled or towed bitumen pressure sprayer equipped for spraying the material uniformly at specified rates and temperatures as per MORTH specification CI.503,112 ( Including cleaning of Road Surface ) |
| 11 | Providing and laying open graded premix carpet 20mm thick (compacted) on prepared surface in a single course as wearing course aggregates as per Table 500-23, heating bituminous binder @ 14.6 Kg/10 Sqm.(VG-10 grade) and aggregates in Hot Mix Plant, transporting the mixed material with tipper and laying with paver finisher to the required level and grade, rolling with power roller, 8-10 tonne but excluding cost of tack and seal coat with lead for mix of material 1 Km.[MORTH Specification : Clause 511,112] In approved Hot Mix Plant as per clause 6.5 of Manual, including loading of aggregates with F.E loader withbitumen VG-30 |
| 12 | Providing and laying seal coat for sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall, including rolling with a smooth wheeled roller 8 - 10 tonne capacity finished to required level and grades, complete as per MORTH specification clause 513 Laying by Mechnical MeansType B - Premixed in in approved HMPas per clause 6.5 of manual having capacity 50 TPH comprising of aggregate (sand or grit) having size 2.36 mm to 180 micron @ 0.06 Cum per 10 Sqm and bitumen binder (VG-30 grade) @ 6.8 Kg / 10 sqm and laying by hydrostatic paver finisher with sensor control, including mixing, transportation, laying, rolling etc. complete - including carriage for 1 Km. lead. |
| 13 | Supply & fixing flood gauge (water gauge) as per IRC 67 standard 200cm. long fixed on angle iron post 50mmx50mmx6mm, 2.60m. Long fixed cement concrete M-15 mix size 30x30x60 cm. Complete including transportation excavation etc. complete. |
| 14 | Providing & erecting typical Cititzens infromation Board as per approved drawing & specification made of two MS Sheet of 1.6 mm thick each of xize 900mm x 750mm stiffended by angle iron 25mm x 25mm x 3mm all around the plate and plates fixed on frame of 75mm dia pipe of 12 swg sheet ( vertical post 3050mm with angle holdfasts and horizontal member 900mm) to be joined by 5mm thick MS plate at 12 places ( 65mm x 50 mm) duly embedded in cement concrete M-15 grade of block of 600mm x 600mm x 750 mm size below ground level as per enclosed drawings & as directed by engineer-in charge. All MS will by stove enameled on both side lettering figuring and border will be with ready mixed symtheic enamel paint of superior quality in required shade and colour etc. complete in all respect. all sections of framed post and steel tube will be painted with primer and two coat of epoxy paint as per drawing and and technical specifications. |
| 15 | Providing and erecting direction and place identification retro - reflectorised sign as per IRC:67 made of high intensity grade sheeting exclusive of lettering, border & signs fixed over aluminium sheeting, 2 mm thick fixed on a mild steel angle iron frame 50mmx50mmx6mm supported on mild steel angle iron post 75 x 75 x 6 mm upto the top of sign board, length of post from bottom of sign boardis 2.85 m. upto foundation level post duly painted in black and white synthetic enamelalternate ship 30cm. wide fixed to the ground by means properly designed foundation with M-15 grade cement concrete 45cm x 45cm x 60 Cm , 60 Cm below ground level as per approved drawing & as per MORTH specifications clause 801. Double angle post 120 cm. X 75 cm. |
| 16 | Providing and fixing of retro- reflectorised inclusive cautionary, mandatory and informatory sign as per IRC-67 made of high intensity grade sheeting lettering, border & signs fixed over aluminium sheeting, 1.5 mm thick, fixed on mild steel angle iron frame 50mmx50mmx6mm supported on a mild steel angle iron post 75mmx75mmx6mm upto the top of sign board, length of post from bottom of sign boardis 2.85m. upto foundation level post duly paintedin black & white synthetic enamel.fixed to the ground by means of properly designed foundation with M-15 grade cement concrete 45 Cm x 45 Cm x 60Cm, 60 cm below ground level as per approved drawing & as per MORTH specification Cl. 801. 60 Cm equilateral triangle |
| 17 | Providing & fixing Two way reflective Plastic body raised road studs with anchor with shank 100x100x19.8special reflective elements 19 degree tilted etc. complete made by swareflex at 9 m. centre to centre on edge lenes, lane lines and 1 m. centre to centre on pedestrai crossing including fixing, cost of conveyance of all materials to site including labour and hire charges for machineries involved etc. complete as per standard specifications and directions of the Engineer-in-charge.. |
| 18 | Providing and laying of hot applied thermoplastic compound inclusive type I reflectrosing glass beads as per table 800-3, 800-4 applied in uniform thickness of at least 2.5 mm and spread uniformly with reflectorising glass beads type II in addition @ 250 gms per Sqm with a road marking machine as per IRC: 35 complete with traffic diversion arrangement as per MORTH specification clause 803.4. |
| 19 | Supply & fixing of precast reinforced cement concrete M-15 grade kilometre stone of standard design as per IRC: 8-1980, fixing in position in cement concrete 1:4:8 including painting and printing etc. Ordinary Kilometre stone |
| 20 | Supply & fixing of precast reinforced cement concrete M-15 grade kilometre stone of standard design as per IRC: 8-1980, fixing in position in cement concrete 1:4:8 including painting and printing etc. 200m stone |
| 21 | Earth work in excavation for foundation of structure complete with all lift, dewatering shoring and shuttering etc.including refilling of trenches in 25.mm layers, ramming, watering and disposal of surplus soil within a lead of 1000 metres, as per drawing and technical specfication.[MoRTH Specification : Clause : 304] In ordinary Soil [MoRTH Specification : Clause : 301] Depth upto 3m |
| 22 | Providing and laying mechnically mixed and vibrated Cement Concrete in foundation upto a depth of 1.5 metres below ground level and 1.50 metres above Ground/Bed level.[MoRTH Specification : Clause 1000/1700] Cement concrete 1:3:6 mix with stone aggragate 40mm crusher broken. |
| 23 | Cement Concrete for plain/reinforced concrete in open foundation, any level, complete as per drawing and technical specifications. [MoRTH Specification Section 1700&1500]Concrete M20 grade In P.C.C. |
| 24 | Providing and laying controlled cement concrete for cement concrete pavements using OPC 43 Cement and design mix concreteincluding mixing and vibrations concrete with necessary needle vibrators and surface with screed board vibrating complete in all respect withstone aggregate (crusher broken) including anti-skid textured finish to required camber/ superelevation and grade including formwork ,curing etc. as per specification (-do-) with cement concrete M-30 grade |
| 25 | Cutting of construction joint/ longitudinal joint 4 to 6 mm. wide & 75 to 90 mm deep using mechanical concrete cutter including cost of diamond bit cutting wheel and filling of bitumen sealingcompound in groove including cost of sealing compound. |
| 26 | Providing and laying reinforced cement concrete pipes N.P.3for culverts including jointing ends and fixing collar with cement mortar 1:2 [MoRTH Specfication : Clause : 900/2900] 1200 mm dia |
| 27 | Providing and laying reinforced cement concrete pipes N.P.3 for culverts including jointing ends and fixing collar with cement mortar 1:2 [MoRTH Specfication : Clause : 1000/2900] 600mm dia |
| 28 | Providing and laying reinforced cement concrete pipes N.P.3 for culverts including jointing ends and fixing collar with cement mortar 1:2 [MoRTH Specfication : Clause : 1000/2900] 300 mm dia |
| 29 | Sand filling and compaction by mechnical means in foundation trenches, in 150mm layers, with all lead and lift, as per drawing and technical specification, to achieve field density. [MoRTH Specification : Clause : 304] |
AI Tender Summary
Tender Timeline
Jul 29, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedAug 07, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedAug 10, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender