Military Engineer Services-MES has published Tender For Comprehensive Maintenance Of Misc Structural Repair, Dampness, Leakage, Seepage, Roof Treatment, Ceiling, Columns, Chajja, Fins, Facia, Rainwater Pipes, Flooring, Plastering, Plinth Protection, Plumbing. Submission Date for this Tender is 18-08-2023. Forming Tools Tenders in Kolkata West Bengal. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Taking down/dismantling loose/damage concrete including plaster of any description and in any position from RCC structures like chajja, fins, roof ceiling,louvers, parapet, column, beam, and of lintel by hammering with wooden mallets carefully chipping off the old concrete surface with necessary scaffolding upto 24mtr height including cutting of rusted reinforcement if so required and disposal of old debris to outside the premises including cleaning the existing surface of concrete and reinforcements as obtained after dismantling by wire brush including scrapping & cleaning with emery paper or by air blasting or sand blasting incl foreign matrials , loose concrete/aggregate etc andwashing down with water as required complete all as specified and directed. |
| 2 | Material andlabour for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending lapping etc as required and welding with existing bar complete all as specified and as directed. |
| 3 | Material and labour for TMT bars 6 to 8mm bar, cut to length, bent to shape required, including cranking, bending, lapping etc as required and welding with existing bar complete all as specified and as directed. |
| 4 | Material and labour for TMT deformed bar or twisted bars upto 10mm dia as in stirrups cut to lenth bent to shape required including cranking ,bending etc and lapping ,welding as directed to the existing one complete all as specified and as directed. |
| 5 | M & L for providing single coat of epoxy bond adhesive of prepared non metallic surface (existing surface) and applying by brush all as per manufactures instruction/specification. The bonding agent shall have minimum compressive strength of 40 N/Sqmm and complete all as specified and directed. |
| 6 | Supply and application of Epoxy Zinc rich primer on the steel surface by brush the primer shall have a minimium specific gravity 1.75 minimum weight film thickness/coat 40 microns and minimum adhesive bond strength with steel is 1.5N/mm2 including cleaning and removing loose concrete from steel surface complete all as specified and directed. |
| 7 | M&L for providing and placing in position free flow non shrink cementitious micro concrete of Grade of M-30 to the effected beam, column etc . The micro concrete shall have a minimium 1 day compressive strength of 10 Mpa and 28 days strength of 30 Mpa, minium tensile strength 5N/mm2 @ 28 days, minimium flextural strength 5N/mm2 @ 28days and complete all as specified and directed. |
| 8 | Supply, mixing and application two component structural grade polymer modified reinstatement mortar, where local spalling has taken place or shuttering is not possible . The mortar can be applied in layers not exceeding 6mm thick in each layer in and upto any thickness in smaller vertical pockets and upto any thickness in horizontal applications. The mortar should have a minimium compressive strength 12N/mm2 in 1 day and 45N/mm2 in 28 days. Minimum flexural strength should be 8 N/mm2 in 28 days. A modified styrene butadience emulsion for use as a bonding aid and gauging liquid for cementious system to be mixed with cement slurry before the application of modified polymer mortar to be used @ 6 ltr/bag of cement. The bonding agent should have minimium compressive strength 24N/mm2. Minimum tensile strength 3.5N/mm2, minimium flexural strength 6.5N/mm2 upto 25 mm average thickness complete all as specified and directed. |
| 9 | Use and waste of formwork to sides of pillars, posts, struts, piers, columns and stanchions for rough finished concrete surfaces complete all as specified and as directed. |
| 10 | Use and waste of formwork to sides of sides and soffits of beams, lintels, floors etc. for rough finished concrete surfaces complete all as specified and as directed. |
| 11 | Use and waste of formwork to parapet, RCC wardrobe and similar items for rough finished concrete surfaces complete all as specified and as directed. |
| 12 | Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar works n.exc. 200mm thick etc for rough finished concrete surfaces complete all as specified and as directed. |
| 13 | Use and waste of formwork tofins, facia, louvers. parapet, chajja etc for rough finished concrete surfaces complete all as specified and as directed. |
| 14 | Material and labour for 5 mm thick plastering in CM (1:3) on concrete surfaces as in sides of column, lintel, beam, chajja, facia, railing, RCC wardrobe etc including finish the surface even and fair without using extra cement complete all as specified and as directed. |
| 15 | Material and labour for RCC 1:1.5:3 type A1 (using 20mm graded stone aggregate) as in fins, fascias, louvres, parapets,and railings exc. 60cm in height, newels, balustrade, and the like complete all as specified and as directed. |
| 16 | M&L for reinforced cement concrete M-25 (design mix) in chajjas and like complete all as specified and directed. |
| 17 | Taking up or down 15mm dia steel tubing and connections, segregating serviceable pipe for reuse complete all as specified and as directed. |
| 18 | All as per item No. 17 above but 20mm dia complete all as specified and directed. |
| 19 | All as per item No. 17 above but 25mm dia complete all as specified and directed. |
| 20 | Supply and fix 15mm bore unplasticised PVC pipes of pressure rating 10 kgf/cm sq fixed to walls , ceiling or in floors etc complete all as specified and directed. |
| 21 | All as per item No 20 above but 20 mm outer dia complete all as specified and directed. |
| 22 | All as per item No. 20 above but 25mm dia complete all as specified and directed. |
| 23 | Supply and fix 15mm bore medium grade galvanized steel tubes with all fittings and fixed to wall or in floors etc complete all as specified and as directed. |
| 24 | All as per item No. 23 above but 20mm dia complete all as specified and directed. |
| 25 | All as per item No. 23 above but 25mm dia complete all as specified and directed. |
| 26 | Taking down chowkahts or frames with shutters (without taking off shutters from the frame) not exceeding 1.5 Sqm each complete all as specified and as directed. |
| 27 | Taking down chowkahts or frames with shutters (without taking off shutters from the frame) exceeding 1.5 Sqm but not exceeding 4 Sqm each complete all as specified and as directed. |
| 28 | Taking down shutters of any description exceeding 1 Sqmbut not exceeding 2 Sqm each complete all as specified and as directed. |
| 29 | Refixing of shutters in same opening of any descriptionexceeding 1 Sqm each with old serviceable builders hard ware articles / with new builders hard warearticles if any complete all as specified and as directed. |
| 30 | Taking down old unservicebale steel window/ ventilators frame with shutter of any description. |
| 31 | Supply and fix 2nd class hard wood , plain, solid , straight chowkhats and frames, wrought, framed, rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and as directed. |
| 32 | Materials and labour for treating back of chowkhats etc with tar or coal tar black paint,area tarred exceeding 0.10 sqm but not exceeding 0.50 sqm each complete all as specified and as directed. |
| 33 | Supply and fix 35mm thick 2nd class hard wood factory made plain framed panelled door shutters, (two panel) with lock rail and panel of 12mm veneered particle board with commercial veneered on both faces and rail and stiles as per IS 1003(Pt-I), kilnseasoned and chemically pressure treated etc. complete all as specified and as directed. |
| 34 | Supply and fix 35mm thick 2nd class Hard woodfactory made glazed and skeleton door shutters, open rebated and prepared to received glass/gauge etc (without sash bars) edges of framing plain, chamfered or rounded and mitred , beads for securing glass etc the size of member of shutter as specified in SSR Part-I, clause 8.24 (a) complete all as specified and as directed. |
| 35 | Supply and fix 30mm thick flush shutters solid core construction with particle board core and plywood face panels, one face covered with decorative face veneer with lipping / frame to match complete all as specified and as directed. |
| 36 | Supply and fix factory made solid PVC mouldeddoor shutter 28 to 30 mm thick (stiles)with 2,4 or 6 raised panel design with 2mm thick moulded PVC sheet on back face ,with particle board core ,supplying and fixing in frame at site as per specification and drawing complete all as specified and directed. |
| 37 | Supply and fix solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube with EPDM gasket as per specification and drawing complete all as specified and as directed. |
| 38 | Supply and fix factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, as per specification and drawing complete all as specified and as directed. |
| 39 | Supply and fix in repairs prelaminated particle board18/19 mm thick, interior grade one side decorative choice lamination and other sidebalancing white lamination fixedin cup boards shutters with 6mm thick teak wood lipping/edging all round complete all as specified and as directed. |
| 40 | Supply and fix in repairs prelaminated particle board18/19 mm thick, interior grade one side decorative choice lamination & other sidebalancing white lamination fixedin cup boards shelves with front side 6mm thick teak wood lipping/edgingcomplete all as specified and as directed. |
| 41 | Material and labour for PCC (1:3:6) type C1 (using 20mm graded stone aggregate) for fixing of hold fasts block and similar work including necessary form work complete all as specified and as directed. |
| 42 | Supply and fix mild steel work as in hold fast or similar article conforming to Fe-410-0 or Fe-310-0 including tarring and sanding complete all as specified and as directed. |
| 43 | Supply and fix 100 mm size stainless steel butt hinges, medium weight fixed with cadmium plated screws complete all as specified and as directed. |
| 44 | Supply and fix 100 mm size butt hinges, medium weight, cold rolled mild steel (ISI marked) complete all as specified and as directed. |
| 45 | Supply and fix300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and as directed. |
| 46 | Supply and fix 150mm long aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed. |
| 47 | Supply and fix 150mm size extruded aluminum alloy handle fabricated type anodized (ISI Marked) complete all as specified and as directed. |
| 48 | Supply and fix steel windows with side hung double shutters (both glazed and gauged shutters) in single frame including box type hinges with steel handle, and steel peg stay, complete with glazing bars for glazed shutter, dovetailed or welded including taking down old rusted unserviceable steel windowwith glass panes/wire mesh/grill/guard bar and all fittings complete all as specified and as directed. |
| 49 | Supply and fix steel windows with side hungshuttersincluding box type hinges with steel handle and steel peg stay complete with glazing bars, flush butt welded etcincluding taking down old windows with glass panes, grill/guard bar etc and all fittings complete all as specified and as directed. |
| 50 | Supply and fix 3mm thick sheet glass, ordinary quality and glazing with oil putty/wooden beadings in square n exc 0.5 sq. m in each pane fixed to wooden frame complete all as specified and as directed. |
| 51 | Supply and fix 3mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane fixed to steel frame complete all as specified and as directed. |
| 52 | Supply and fix 3mm thick frosted glass ordinary quality, glazing with oil putty in square not exceeding 0.5 Sqm in each pane fixed to wooden frame with wooden beading complete all as specified and as directed. |
| 53 | Supply and fix 3mm thick frosted glass ordinary quality, glazing with oil putty in square not exceeding 0.5 Sqm in each pane fixed to steel frame complete all as specified and as directed. |
| 54 | Supply and fix rolled mild steel Fe-410-w (grade E-250) quality A framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars and similar work complete all as specified and as directed. |
| 55 | Supply and fix 3mm thick sheet glass, ordinary quality and glazing each pane fixed to steel frame(fixed with oil putty and clips)/wooden frame(fixed with Iind cl hard wood beads) including hacking out old broken glass from metal frmae/wooden frame complete all as specified and as directed. |
| 56 | Supply and fix 3mm thick frosted glass, ordinary quality and glazingin each pane fixed to steel frame(fixed with oil putty and clips)/wooden frame(fixed with Iind cl hard wood beads) including hacking out old broken glass from metal frmae/wooden frame complete all as specified and as directed. |
| 57 | Supply and fix stainless steel wire cloth of 0.36 mm nominal dia of wire and averaging of width of aperture 1.40mm, fixed with stainless steel wire staples complete all as specified and as directed. |
| 58 | Supply and fix in repairs stainless steel wire cloth of 0.36 mm nominal dia of wire and averaging of width of aperture 1.40mm, fixed with stainless steel wire staples complete all as specified and as directed. |
| 59 | Material and labour for two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer to new steel surface including preparation of surfaces exceeding 10cm with or girth complete all as specified and as directed. |
| 60 | Material and labour for two coats of synthetic enamel paint over a coat of pink primer to new wooden surfaces of any description over 10cm width or girth including preparation of new surfaces complete all as specified and as directed.. |
| 61 | Supply and fix aluminium powder coated glazed or gauged shutter for sliding window(2 or 3 track) with aluminium channel section weighing not less than 0.55 kg per sqm including aluminium channel,including all necessary fittings such as rollar, joining cleats, glazing clips, rubber packing aluminium screw as required etc complete all as specified and as directed. (Note:Wiremess/ glass shall be measured and paid separately) |
| 62 | Supply and fixpowder coated aluminium framefor doors, windows, ventilators(including 2/3 track) with one or more rebates including joining cleat for fixing etccomplete all as specified and directed. |
| 63 | Supply and fix aluminium powder coated door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing,handles 2 Nos in each door, hinges,anodised aluminum snap beading screws etc. complete all as specified and directed. |
| 64 | Supply and fix 4mm thick sheet glass ordinary quality, glazing with aluminium beads in square/rectangularexceeding 0.5 Sqm in each pane fixed to aluminium frame complete all as specified and as directed. |
| 65 | Supply and fix 5.50mm thick sheet glass ordinary quality, glazing with aluminium beads in square/rectangularexceeding 0.5 Sqm in each pane fixed to aluminium frame including, rubber packing aluminium screw as requiredcomplete all as specified and as directed. |
| 66 | Supply and fixin repair 25mm dia powder coated aluminium curtain rod fancy type( length from 0.90m to 1.5m)with fancy type end side brackets and fancy type hanging brackets complete all as specified and as directed. |
| 67 | M&L for double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover,governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed. |
| 68 | M&L for cast brass pivot suitable for aluminium door, complete all as specified and directed. |
| 69 | S&F Brass 2lever Mortice lock, vertical type, size 100 mm complete all as specified and directed. |
| 70 | Supply and fix in repair 300mm, mild steel, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed. |
| 71 | Supplyand fixin repair bib taps of 15mm bore fancy type, chromium platedcast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for brass ferrule all complete as specified and as directed. |
| 72 | Supplyand fix in repair angular stop cock of 15mm bore fancy type, chromium plated cast copper alloy, screwed down, high pressure, with crutch handle, screwed both ends for brass ferrulecomplete all as specified and as directed. |
| 73 | Supplyand fix in repair pillar cock of 15mm bore, cast copper alloy with capstan heads fancy type, chromium plated screwed down, high pressure, with long screwed shanks and fly-nuts, screwed for iron pipe and fixedcomplete all as specified and as directed. |
| 74 | Supply and fix in repair 15mm dia Stop valve of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 90gms) complete all as specified and as directed. |
| 75 | Supply and fix in repair 15mm bore Bib tap (Minimum weight 90gms) standard of PTMT any colour high pressure screwed for iron pipe complete all as specified and as directed. |
| 76 | Supply and fix in repair 10 litre capacity PVC valve less, symphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern including PVC connections 15mm size with PTMT nuts and washer both side of length 450mm complete all as specified and as directed. |
| 77 | Supply and fix health faucet (ABS body) with 8mm dia 1 meter long flexible tube and wall hook for fixing in 15 mm dia pipe complete all as specified and as directed. Make:Jaquar or equivalent. |
| 78 | Supply and fix chromium plated two ways bib cock with wall flange for fixing in 15 mm dia pipe complete all as specified and as directed. Make:Jaquar or equivalent. |
| 79 | Suply and fix in repairs stainless steel sink with drainage board made out of 1.00 mm thick sheet for kitchen with plug washers, waste pipe including bedding in cement mortar on dwarf wall or including cast iron cantiliver brackets connecting union overall size 915 X 460 mm with bowl size 405x355x178mm or 410x357x178mm complete all as specified and as directed (Model No.BSSBSD-52 of Blue Star/SBSD 05 of Joyna/ Equivalent brand of Prayag). |
| 80 | Supply and fixin repair vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests including "P"or "S" trap (excluding flushing cistern and flush pipe) including provision of lime concrete bedding complete all as specified and as directed. |
| 81 | Supply and fix in repair Vitreous china EWC "P" or "S" Trap of size 400x365x540mm, white including Plastic water closet seat, white closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device suitable for EWC (excl flushing cistern and flush pipe) complete all as specified and as directed. |
| 82 | Supply and fix in repairs vitreous China wash basin white flat back, size 630 x 400 mm including PTMT waste coupling 32mm dia (min wt 45 gm), 15mm bore PTMT pillar tap,chain and plug and porcelain stopper etc. complete all as specified and as directed. |
| 83 | Supply and fix in repair Brass chromium plated Tubular Towel Rail , 20mm dia, D type, 600mm long between flange fixed with chromium plated brass screws complete all as specified and as directed. |
| 84 | Supply and fix in repairs PVC connection 15mm size with PTMT nuts of length 600 complete all as specified and as directed. |
| 85 | S & F in repairs Rotational moulded polyethylene water storage tanks (cylinderical vertical with closed top) 1000 Ltr Capacity, hoisted and fixed in position all as specified including dismantling existing water tank. |
| 86 | All as per item No.85 above but 500 Ltr capacity. |
| 87 | Supply and fix in repairs 20mm bore Ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe complete all as specified and as directed. |
| 88 | Supply and fixing in repair Gun-metal, globe or gate valves size 20 mm dia, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed |
| 89 | Supply and fix in repair 100mm cast iron Nahani trap, with grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B1 complete all as specified and as directed. |
| 90 | Supply and fix in repair chromium plated wall mixer with connecting legs,for fixing in 15 mm dia pipe complete all as specified and directed. Make:Jaquar or equivalent.(Cat No.- FLR-5273 UPR) |
| 91 | Supply and fix in repair chromium plated mixer with connecting legs,for fixing in 15 mm dia pipes over wash hand basin complete all as specified and directed. Make:Jaquar or equivalent.(Cat No. - FLR-5169 NB) |
| 92 | Supply and fix in repair chromium plated shower 105mm dia round shape single flow with air effect (ABS body and face plate chrome plated with rubit cleaning system) for fixing in 15 mm dia pipe complete all as specified and as directed. Make:Jaquar or equivalent. (Cat No. - OHS-1719) |
| 93 | Supply and fix in repair chromium plated concealed stop cock with fitting sleeves and adjustable wall flange with seal for fixing in 15 mm dia pipe complete all as specified and as directed. Make:Jaquar or equivalent.(Cat No.- OPR 10083 KPM) |
| 94 | Supply and fix in repair chromium plated angular stop cock with wall flange for fixing in 15 mm dia pipe complete all as specified and as directed.Make:Jaquar or equivalent. (Cat No.- ORP-10053 PM) |
| 95 | Supply and fix in repair chromium plated bib cock with wall flange for fixing in 15 mm dia pipe complete all as specified and as directed. Make:Jaquar or equivalent. (Cat No.- 10037 PM) |
| 96 | Supply and fix in repair chormium plated pillar cock for fixing in 15 mm dia pipe complete all as specified and as directed. Make:Jaquar or equivalent. (Cat No.- OPR-10001 PM) |
| 97 | Supply and fix glass shelf 600mm long with CP railings at sides complete all as specified and as directed. Make:Jaquar or equivalent (Cat No. CAN-1171 N) |
| 98 | Supply and fixtoilet paper holder with flap recessed type (stainless steel) complete all as specified and as directed. Make:Jaquar or equivalent. (Cat No.- CAN-1155S) |
| 99 | Dismantling of old unserviceable floor, hearth or wall tiling including cement mortar bedding (but not backing and rubbish off the premises complete all as specified and as directed. |
| 100 | Roughnening surface of old concrete floor by picking ,sweeping clean and washing down with water to remove dust ,etc complete all as specified and directed. |
| 101 | Material and labour for Light shade Vitrified tiles 10mm thick (square/rectangular) polished, area of each tiles n.exc. 0.36 sqm in floorsetc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour tiles over and including 20mm thick screed bed or bedding layer in CM(1:6) complete all as specified and as directed. |
| 102 | Material and labour for Light shade Vitrified tiles 10mm thick (square/rectangular) polished, area of each tiles n.exc. 0.36 sqmin skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour tiles over and including 10mm thick rendering in CM (1:4) complete all as specified and as directed. |
| 103 | Material and labour for Non-skid ceramiccoloured tiles7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but n.exc. 0.18 sqm as in floors etc set and jointed in neat cement slurry and pointed in white or colouredcement to match the colour of tiles over and including 15mm thick screed bed or bedding layer in CM(1:6)complete all as specified and as directed. |
| 104 | Material and labour for glazed ceramic colourtiles (300x200) x7mm thick in skirting/dados etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour tiles over and including 10mm thick rendering in CM(1:4) complete all as specified and as directed. |
| 105 | Demolition of cement concrete in ground floors and pavings n.exc. 15 cm thickness below or above ground level complete all as specified and as directed. |
| 106 | Demolition of brickwork built in cement mortar including all quoins, arches, pillars etc. complete all as specified and as directed. |
| 107 | Material and labour for brick work withbricks class designation 75, old size, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and as directed. |
| 108 | Material and labour for brick work with bricks class designation 75, old size, straight or curved on plan to any radius in half brick thick walls built in cement mortar (1:4) complete all as specified and as directed. |
| 109 | Taking down cement plaster of any description on brick walls including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed. |
| 110 | Material and labour for 20mm thick plaster in cement mortar (1:4) in two layers, i.e 10mm thick in each layer, top layer mixed with integral water proofing liquid admixture as per manufacturers instruction on brick or concrete surfaces of wall finished the surface fair and even complete all as specified and as directed. Note :- WPC shall be measured and paid separately. |
| 111 | Supply only integral water proofing liquid admixture for concrete and mortar (Make :CONPLAST X421IC of Fosroc /SIKA No 1 of SIKA/equivalent brand of PIDILITE) |
| 112 | Material and labour for rendering 15mm thick in cement mortar (1:6) on fair faces ofbrickwork or concrete surfaces, finished the surface even and smooth without using extra cement complete all as specified and as directed. |
| 113 | Material and labour for rendering 05mm thick in cement mortar (1:3) on concrete surfaces in ceiling and finished the surface even and smooth without using extra cement complete all as specified and as directed. |
| 114 | M&L for applying 1.50mm thick wall care putty and appling two coats of oil bound distemper over a coat of alkali resistant primer to wall to new plaster surface complete all as specified and as directed. |
| 115 | Material and labourfor preparation of new plastered surfaces of wall and applying two coats of cement base paint over a coat of alkali resistant primercomplete all as specified and as directed. |
| 116 | Material and labourfor preparation of new plastered surfaces of wall and applying three coats of white wash complete all as specified and as directed. |
| 117 | All as per item No. 116 above but in ceiling. |
| 118 | Material and labour for 40mm thick PCC (1:2:4) type B1 (using 20mm graded stone aggregate) as in floors complete all as specified and as directed. |
| 119 | Supply and fix in repairs PVC (SWR) pipe 110mm bore, type A, single socketed, in any length with rubber ring joints fixed to walls with and including PVC clip and including taking down existing rain water pipes complete all as specified and as directed. |
| 120 | Dismantling cast iron drain pipes of any dia and any description, jointed in cement mortar obtained either from trenches/wall as required complete all as specified and as directed. (Note : Excavation if required, shall be measured and paid separately) |
| 121 | Supply and fix 75mm bore cast iron (Sand cast pipes) soil, waste and vent pipes in any length with or without ears, with cement joints, fixed to wall with MS clamp complete all as specified and as directed. |
| 122 | Supply and fix 100mm bore cast iron (Sand cast pipes) soil, waste and vent pipes in any length with or without ears, with cement joints, fixed to wall with MS clamp complete all as specified and as directed. |
| 123 | Supply and fix 100mm bore cast iron bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and as directed |
| 124 | Supply and fix in repairs 75mm bore cast iron bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and as directed |
| 125 | Supply and fix in repairs 100mm bore cast iron branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and as directed. |
| 126 | Supply and fix in repairs 100mm bore cast iron cowls complete all as specified and as directed. |
| 127 | M&L for 20mm thick Granite(of any type)work(table rubbed and polished) in steps, jambs,pillars,window -cills, cooking plateforms and like in cement mortar(1:4) including pointing in white cement(1:2) using marble dust with admixture of pigment to match with shade of granite ,complete all as specified and directed. |
| 128 | Material and labour for complete removal of existing treatment of old plastered surfaces of wall including washing, rubbing down and stopping of old treatement and applyingtwo coats of oil bound distemper over a coat alkali resistant primer and finished the existing surface with 1.5mm thick wall puttyetc complete all as specified and as directed. |
| 129 | Material and labour for preparation of old treated plastered surfaces of wall and applying one coat of white wash complete all as specified and as directed. |
| 130 | All as per item No. 129 above but in ceiling complete all as specified and directed. |
| 131 | Demolition of cement concrete of any description including any treatment there to and in any position provided as in roof padding, roof curb etc complete all as specified and as directed. Note: - (a) Demolition should be done carefully to roof slab. (b) Any damage occurred in the roof surfaces during demolition shall be made good by the contractor without extra cost to the department. (c) Disposal of old debris/retrieved material to outside the premises or as directed by the Engineer-in-Charge. |
| 132 | Material and labour for providing plain cement concrete 1:2:4 type B1 using 20mm graded stone aggregate as in roof padding laid in slope as per requirementmixed with integral water proofing liquid admixture as per manufacturer"s instructions complete all as specified and as directed. Note :(i) Minimum thickness of PCC shall be 50mm. (ii)Integral water proofing liquid admixture shallbe measured and paid separately underappropriate item. |
| 133 | Material and labour for water proofing treatment with APP based standard membrane over PCC padding in roof with the following courses of treatment :- (a) Applying bituminous primer (IS 3384) @ 0.40 Kg per sqm of the surface area including cleaning the surfaces completeall as specified and directed. (b) Applying APP plastomeric bitumen based mineral finished water proofing membranepolyester reinforced(4 Kg/Sqm) with 10cm over laps and torch bonded at joints including surface preparation before and after application of treatment as per manufactures instruction complete all as specified and directed. |
| 134 | Taking down carefully copper / aluminium point wiring (light, fan, socket or power) complete including fittings and fixtures such as switches, Bell push, call bell, ceiling rose, sockets, switch sockets, regulator, lamp holderetc by unscrewing from board carefully and keep aside serviceable materials for reuse including making good of the disturbed surfaces, complete all as specified and directed. |
| 135 | Material and labour for point wiring (surface type) with PVC insulated 1100 volts grade FRLS unsheathed single core multi-stranded copper conductors 1.5 sqmm (nominal area) for phase, neutral and 1.5 sqmm PVC insulated unsheathed multi-stranded copper conductor cable for earth continuty conductor drawn through and including PVC casing-N- caping (medium duty) double lock type,size of casing caping as required at site but not less than 20mm with fittings and accessories pressed steel sunken terminal box in concealedmade out of 1.6 mm thick MS sheet duly painted with two coats of synthetic enamel paint of approved colour over a coat of red oxide zinc chrome primer and covered with 3 mm thick bakelite sheet cover for fixing switches, sockets, regulator etc and earth continuty conductor shall be connected to common earth and earth dollyfor one light/ fan point controled by one, one way 5 Amp switch complete all as specified and as directed. |
| 136 | All as per item No 135 here in above but for One 3/5pin 6Amp Socket outlet on the same board with other switches complete all as specified and as directed. |
| 137 | All as per item No 135 here in above but for One 3/5pin 6Amp Socket outlet on the independent board complete all as specified and as directed. |
| 138 | All as per item No 135 here in above but for One call bell point controlled by one bell push switch complete all as specified as directed. |
| 139 | All as per item No 135 here in above but for one light point controlled by two 2 way modular switch complete all as specified as directed. |
| 140 | All as per item No 135 here-in-before,for one 15 Amps socket outlet but using 2.5 sq mm,copper conductor with 2.5 sq mm,PVC insulated single core cable for earth continuity conductor complete all as specified and directed. |
| 141 | M&L for cutting chases, pinning in making good to facing where required and pointing in cement mortar (1:3) to ends or edges of landing, steps, cills, sunshades sheleves, lintels, etc and cutting chases for concealed water tubing or concealed conduict wiring etc and making good cutting not exc 10 cm grith complete all as specified and directed. |
| 142 | Supply and fix switch piano flush button 5/6 Amp single pole, one way complete all as specified and as directed. |
| 143 | Supply and fix socket outlet 5 Pin, 5/6 Amps flush type complete all as specified and as directed. |
| 144 | Supply and fixSwitch socket combination5 Pin, 5/6 Amp flush type complete all as specified and as directed. |
| 145 | Supply and fix switch socket combination 5 Pin 15/16 Amp flush type with complete all as specified and as directed. |
| 146 | Supply and fixing switch flush type, 6 Amps, single pole, two way complete all as specified as directed |
| 147 | Supply and fix lamp holder insulated body with back plate for angle/batten fittings complete all as specified and directed. |
| 148 | Supply and fix ceiling rose surface bakelite, 65 x 50mm, three terminals complete all as specified and directed. |
| 149 | Supply and fix bell push, flush type 6 Amps complete all as specified and directed. |
| 150 | Supply and fix electronic fan regulator stepped type flush type AC 240 volt complete all as specified and as directed. |
| 151 | Supply and fix in replacement call bell Ding Dong, AC, 230V single pole complete all as specified as directed. |
| 152 | Material and labour for sub-main wiring (surface type) with two run of PVC insulated, unsheathed, FRLS single core, multistranded copper conductor of size 4.0 Sq mm and one run of 4.0 Sqmm copper conductor as continuity earth wire, drawn through and includingPVC casing caping including taking down old sub main wiring with casing caping complete all as specified and directed. (Note:Two run of 4.0 sqmm copper conductor cable, one run of 4.0 sqmm earth continuity cable and one run of PVC casing capping shall measured as one unit). |
| 153 | Material and labour for sub-main wiring (surface type) with two run of PVC insulated, unsheathed, FRLS single core, multistranded copper conductors of size 6.0 Sq mm and one run of 6.0 Sqmm copper conductor as continuity earth wire,drawn through and including PVC casing caping including taking down old sub main wiring with casing caping all as specified and as directed. (Note:Two run of 6.0 sqmm copper conductor cable, one run of 6.0 sqmm earth continuity cable and one run of PVC casing capping shall measured as one unit). |
| 154 | Material and labour for sub-main wiring (Concealed type) with two run of PVC insulated,unsheathed,FRLS single core,multistranded copper conductors of size 4.0 Sq mm and one run of 4.0 Sqmm copper conductor as continuityearth wire, drawn through and including PVC conduit (medium grade) of adequate sizewith fittings and accessoriesas required at site and taking down old sub main wiring with conduit complete all as specified and as directed. Note:- (Note:Two run of 4.0 sqmm copper conductor cable, one run of 4.0 sqmm earth continuity cable and one run of PVC conduit shall measured as one unit). (ii)Cost of cutting of wall, if any, for housing ofGI box and also making good the disturbed surfaces are deemed to be included in unit rate. |
| 155 | Material and labour for sub-main wiring (Concealed type) with two run of PVC insulated,unsheathed,FRLS single core,multistranded copper conductors of size 6.0 Sq mm and one run of 6.0 Sqmm copper conductor as continuityearth wire, drawn through and including PVC conduit (medium grade) of adequate sizewith fittings and accessoriesas required at site and taking down old sub main wiring with conduit complete all as specified and as directed. Note:- (i):Two run of 6.0 sqmm and one run of 6.0 sqmm copper conductor ( for Phase,Neutral and Earth)+One run PVC conduit shall measured as one unit). (ii)Cost of cutting of wall, if any, for housing ofGI box and also making good the disturbed surfaces are deemed to be included in unit rate. |
| 156 | Supply and fix in repair powder coated sheet metal enclosure (in concealed) single pole & neutral for DBs (Double door) 4 way, 240 V with 200 amps rated busbar DIN channel, neutral link & earth link superline complete all as specified as directed. |
| 157 | All as per item No 156 here in above but for 8 way SPN DB complete all as specified as directed. |
| 158 | All as per item No 156 here in above but for 12 way SPN DB complete all as specified as directed. |
| 159 | Supply and fix of 4 way vertical type TPN DB in double door suitable for four pole MCCB as incomer including make good of damaged surface/wall including re-connection with existing earth wire to DB incuding taking out the oldunserviceable one complete all as specified and as directed. Make: Havells Cat No. DHDLVDRWGOFO04/ LTVD04N of L&T/ INDOASIAN Cat No.811888/ Equivalent Makes specified in PS to tender document. |
| 160 | Supply andfix MCCB four pole63 amps, 240 volts, 16 KA, with all incoming / outgoing connections suitablefor fix 4 way vertical type TPN DB in double doortwith proper size of aluminium lugs complete all as specified as directed Make: Havells Cat No. IHLGNF0063 / INDOASIAN Cat No. 830006/ C&S/ Equivalent Makes specified in PS to tender document. |
| 161 | Supply and fix sheet metal enclosure /TPNDBs (Double door) 4 way with 200 amps rated busbar suitable for MCB including taking down old unserviceable enclosure one complete all as specified and directed. |
| 162 | Supply andfix MCB triple pole & neutral 63 amps, 240 volts, 10 KA, "C" series with all incoming / outgoing connections suitablefor4 waytype TPN DB in double door (itrm no 36)with proper size of aluminium lugs completeall as specified and directed . |
| 163 | Supply andfix in repair, MCB triple pole & neutral 63 amps, 240 volts, 10 KA, "C" series with all incoming / outgoing connections suitablefor 4 way type TPN DB in double door (itrm no 36)twith proper size of aluminium lugs completeall as specified and directed . |
| 164 | Supply andfix MCB single pole & neutral 6 to 32 amps, 240 volts, 10 KA, "C" series with all incoming / outgoing connections with proper size of aluminium lugs completeall as specified and directed. |
| 165 | Supply and fix, in repair, MCB single pole & neutral 6 to 32 amps, 240 volts, 10 KA, "C" series with all incoming / outgoing connections with proper size of aluminium lugs complete all as specified and directed. |
| 166 | Supply and fix MCB single pole6 to 32 amps, 240 volts, 10 KA, "C" series with all incoming / outgoing connections with proper size of lugs completeall as specified as directed. |
| 167 | Supply andfix in repair, MCB single pole6 to 32 amps, 240 volts, 10 KA, "C" series with all incoming / outgoing connections with proper size of lugs completeall as specified as directed. |
| 168 | Material and labour for earthing with galvanized steel earth plate electrode 600 x 600 x 6 mm thick, buried directly in ground ( earth pit not less than 2.25 mtrs deep below GL) with top edge of the plate not less than 1.5 mtrs below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel, earth lead wire protected by and including 15mm dia GI pipe (Light grade) and 20mm dia GI pipe (medium grade) for watering and connected to control switch as directed including necessary earthwork as in soft/loose soil, concrete pit in PCC (1:3:6) type C1, pre cast RCC (1:1.5:3) type A1 cover slab duly reinforced with 8mm dia TMT bar @ 150mm C/C both way and two Nos lifting handle made of 8mm dia TMT bar and set in cement mortar (1:4), funnel, wire mesh, char coal or coke and salt in alternate layer, testing, etc complete and as specified in electrical plate No 3 of SSR Pt I including taking down old earthing complete all as specified and directed. |
| 169 | Supply and fix GI wire as earth continuity conductor including taking down old unserviceable earth wire compleate all as specified and as directed. |
| 170 | Supply andfix GI pipe 15 mm bore (dia), light-grade for protection of earth electrode including taking down old unserviceable GI pipe complete all as directed and as specified. |
| 171 | S&F LED tube light fitting, 1 x 18 watt, 4 feet, 220 volt AC decorative type with driver holder and led lamp including connecting up with three core flexible cable copper conductor including taking down old unserviceable light fitting all as specified and directed. |
| 172 | S&FLED building security light fitting 35 watt energy saving versatile pressure die-cast aluminium IP65 building security luminaire with suitable GI bracketcomplete with all accessories and including connecting up with twin core twisted flexible copper conductor cable with suitable size of 230V, 50 HZ complete including taking down old unserviceable light fitting all as specified and directed. |
| 173 | S&F LED post top lantern with post top made in cast aluminium spigot housing with decorative opal acrylic diffuser and IP 65 protection including 40 Watt LED lamp with all accessories and fixing in existing post including taking out old unserviceable/broken light fittings complete all as specified and directed. |
| 174 | Material and labour for point wiring (concealed type) with PVC insulatedFRLS(Fire reatrdant low smoke) cable 1100 volts grade unsheathed single core multi-stranded copper conductors 1.5 sqmm (nominal area) for phase, neutral and 1.5 sqmm PVC insulated unsheathed multi-stranded copper conductor cable for earth continuty conductor drawn through and including PVC conduit (medium grade) of adequate sizewith fittings and accessoriesas required at site including suitable size of modular GI boxes of thickness not less than 0.8 mm thick with suitable size of modular inner and outer cover combine plate and accessories complete for fixing of modular switches, sockets, regulator etc and earth continuty conductor shall be connected to common earth and earth dolly for one light/fan point controlled by one way modular switch complete all as specified and directed. Note :(i)Cost of cutting of wall, if any, for housing of modular GI box and also making good the disturbed surfaces are deemed to be included in unit rate. (ii) Cost of modular GI box of suitable module and suitable outer & inner combined cover plate shall be deemed to be included in the qouted rate. |
| 175 | All as per item No 174 above but for one 3/5 pin 6 Amps socket outlet on the same board with other switches complete all as specified and directed. |
| 176 | All as per item No 174 above but for one 3/5 pin 6 Amps socket outlet on the independent board complete all as specified and directed. |
| 177 | All as per item No 174 above but for One call bell point control by one bell push switch complete all as specified and directed. |
| 178 | All as per item No 174 above but for one light point controlled by two 2 way switch complete all as specified and directed. |
| 179 | Material and labour for point wiring (Concealed type)with FRLS PVC insulated 1100 volts grade unsheathed single core multi-stranded copper conductors 2.5 sqmm (nominal area) for phase, neutral and 2.5 sqmm PVC insulated unsheathed multi-stranded copper conductor cable for earth continuty conductor drawn through and including PVC conduit (medium grade) of adequate sizewith fittings and accessoriesas required at site including suitable size of modular GI boxes of thickness not less than 0.8 mm thick with suitable size of modular inner and outer cover combine plate and accessories complete for fixing of modular switches, sockets, regulator etc and earth continuty conductor shall be connected to common earth and earth dolly for 3/5 pin 16 amps socket point on independent board complete all as specified and directed. Note :(i) Cost of cutting of wallfor housing of modular GI box, conduit and making good the disturbed surfaces are deemed to be included in unit rate. (ii) Cost of modular GI box of suitable module and suitable outer & inner combined cover plate shall be deemed to be included in the quoted rate. |
| 180 | Supply and fix modular switch 1 way, 6 A, 1 module including modular white cover plate with frame complete all as specified and as directed. |
| 181 | Supply and fix modular switch 1 way,16A, 1 module including modular white cover plate with frame complete all as specified and as directed. |
| 182 | Supply and fix socket 6A 2/3 pin combined 2 module including modular white cover plate with frame complete all as specified and as directed. |
| 183 | Supply and fixsocket 6A/16A, 2/3 pin combined 2 module including modular white cover plate with frame complete all as specified and as directed. |
| 184 | Supply and fix modular switch 2 way, 6 A, 1 module including modular white cover plate with frame complete all as specified and as directed. |
| 185 | Supply and fix fan regulator modular type120 W, 2 module complete all as specified and as directed. |
| 186 | Supply & Fix Bell push switch designer modular type 1 module complete all as specified and directed. |
| 187 | Supply and fixing sheet metal enclosure single pole and neutral enclosure with a two pin and earth plug socket and plug top 20 Amp complete with one single pole MCB 20 Amp complete all as specified and directed. |
| 188 | Taking down Geysers of any make/ model / type / capacity after disconnecting all electrical and water supply line for repair/ replacement of parts and components, refixing in old position after repair/replacement complete all as specified and as directed. Note:- i)The unit rate quoted is deemed to include for the labour element involved in replacing the spares as mentioned herein below. (ii) The spares replaced shall be measured and paid as supply only items herein below. (iii) The spares shall suit the exisiting makes of geyser or as per existing make of spares, as approved by the GE. Existing makes of Geyser:- Bajaj, Peon |
| 189 | Supply only Apparatus assembly plate ( 8/9 hole) for Geyser of 25 Ltrs / 50 Ltrs capacity (as per existing sample) complete all as specified and directed. |
| 190 | Supply only Thermostat straight stem type complete all as specified and directed. Make : Bajaj/ Elcon/Girish/EGO. |
| 191 | Supply only Heating Element 1500 watt suitable for Geyser of 25 Ltrs capacity Triangular/Round type complete all as specified and directed. Make : Bajaj / Rex/ as per existing make |
| 192 | Supply only Indicating (Red/Green) lamp LED type (square/Round) button type for Geyser of 25/50 Ltrs capacity complete all as specified and directed. |
| 193 | Supply only PVC flexible cold water inlet pipe 15 mm dia 600 mm long complete all as specified and directed. Make : Make:-Prince / supreme / Prayag /Polytuf /. M/S Sak Plast Pvt Ltd. |
| 194 | All asperitem No. 194here-in-before but Hot water pipe ( Inlet wiremess type) complete all as specified and directed. |
| 195 | Supply and fix in repair of Chromium plated stop cock 15mm bore including taking down old unserviceable cast copper alloy stop cock complete all as specified and as directed. . |
| 196 | Supply and fix in repair of round type 3 core incoming copper cable of size 2.5 sqmm for 25/50 Ltrs capacity Geyser complete all as specified and as directed. |
| 197 | Taking down carefully Ceiling Fans of any make, model and capacity from their existing places for servicing i. e. lubricating / Greasing and for rewinding / painting by dismantling the same and keep the blades, canopy, splitpin and other parts and components in safe custody and hanging / fitting on it"s previousposition after repair /rewinding / painting / replacement of spares etc complete all as specified and directed. Note:- i)The unit rate quoted is deemed to include for the labour element involved in replacing the spares as mentioned herein below. (ii) The spares replaced shall be measured and paid as supply only items herein below. (iii) The spares shall suit the exisiting makes of geyser or as per existing make of spares, as approved by the GE. (iv) Rewinding and painting shall be measured and paid separately. Existing makes :- Bajaj, Khaitan, Usha, Himadri |
| 198 | All as per item No. 197 above but Exhaust fan,any make, Model andsize complete all as specified and directed. Existing makes :- Orison, Garg Udyog |
| 199 | All as per item No. 197 above , but wall mounted,any make, Model andsize complete all as specified and directed. Existing makes :-Bajaj |
| 200 | Supply only GM Bush for ceiling fan 1200/1400 mm sweep complete all as directed. |
| 201 | Supply only GM Bush for Exhaust Fan 230/300/350/450 mm sweep complete all as specified and directed. |
| 202 | Supply only Ball bearing (cat No. 6201) for ceiling Fan/Exhaust Fan complete all as specified and directed. Make:- SKF / NBC / Any other reputed make as approved by the GE, |
| 203 | All as per item No. 202 above but cat No. 6202 complete all as specified and directed. |
| 204 | All as per item No. 202 above but cat No. 6203 complete all as specified and directed. |
| 205 | Supply and fix in repair capacitor 2.5 mfd, 220 volts complete all as specified and directed. Make:-Tipcon/Universal / Usha / Bajaj / CG / |
| 206 | All as peritem No. 205above but 3.0/4.0 mfd complete all as specified and directed. (Make:Tipcon/Universal) |
| 207 | Supply and fix in repair of louver shutter for 300 mm sweep exhaust fan made of MS sheet folded type complete all as specified and directed. Make:- Orison, Garg Udyog |
| 208 | Allas peritem 207 here-in-before but for 450 mm sweep exhaust fan complete all as specified and directed. Make:- Orison, Garg Udyog |
| 209 | Material and labour for painting by spraying with synthetic enamel paint, first quality, glossy finish, to Ceiling Fans,any make, Model andsize,including Blades/ Down rods/ Canopy/ Stand, Casing/ Cage andall accessories after preparation of surfce including thoroughly rubbing /cleaning old rusted spot complete all as specified and directed. |
| 210 | All as per item No. 209 above but fo Exhaust Fans,any make, Model andsize complete all as specified and directed. |
| 211 | All as per item No. 209 above but forwall mounted Fans,any make, Model and size complete all as specified and directed. |
| 212 | Material and labour for Rewindingof ceiling fans armature of 1200 mm/1400 mm sweep of any make & Model with replacing the burntout winding by new super enameled high grade copper wire of existing gauge and number of turns and all insulating materials including heat vernishing and testing complete all as directed Make of wire -Finolex / KEI / Havells / ICC / Devidayal / KEI / HPL / C&S / RR Kabel.. |
| 213 | All as peritem No. 212 above but for exhaust fan 230mm/ 300mm sweep, single phase, 230 volts complete all as specified and directed. |
| 214 | All as peritem No. 212 above but for exhaust fan 450 mm sweep, single phase, 230 volts complete all as specified and directed. |
| 215 | All as peritem No. 212 above but for wall mounted fans single phase, 230 volts complete all as specified and directed. |
| 216 | Supply and fix in repair fan blades for exhaust fan of 300 mm sweep as per existing make and type complete all as specified and directed. |
| 217 | All as per item No. 216 above but for exhaust fan of 450 mm sweep complete all as specified and directed. |
| 218 | S&F in repair of incoming twin core copper flexible wire of size 14/0.0076from ceiling rose to ceiling fan / exhaust fans complete all as specified and directed. Make : FINOLEX / HAVELLS / POLYCAB/ KEI / HPL / RR kabel / Mescab. |
| 219 | Supply and fix in repair 3 pin plug top 5 Amps complete all as specified and directed. Make : Anchor / Havells / Crabtree / C&S / HPL / Cona / Bajaj. |
| 220 | Supply and fix in repair 3 pin plug top 15 Amps complete all as specified and directed.Make : Anchor / Havells / Crabtree / C&S / HPL / Cona / Bajaj. |
| 221 | S&F LED tube light fitting of 2 feet long but replacing of the FTL fitting of 20 wattwith energy saving LED luminarries fitting of 10 Watt including taking down old unserviceable LED fitting complete all as specified and as directed. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
