|
| 1 | Taking downframe or Chowkhats (w/o taking off shutter from the frame) of any description exc. 1.50 Sqm and not exc. 4.00 Sqm each incl necessary repair to opening with CM 1:4 complete all as specifiedand directed. |
| 2 | Taking downframe or Chowkhats (w/o taking off shutter from the frame ) of any description notexc. 1.50 Sqmeach complete all as specified and as directed by Engineer-in-Charge. |
| 3 | Taking down Door shutter of any descriptionexc. 1.0 Sqm but n exc 2.0 Sqm each complete all as specifiedand directed. |
| 4 | M&L for two coats synthetic enamel paint over a coat of red oxideprimer on new steel surfaces of any description not otherwise described over 10 cm width or girth including preparation of surfaces complete all as specified. |
| 5 | Supply and fixing windows/ ventilators fabricated from 0.60mm thick rollformed section made of galvanisedsteel powder coated (Base steel as per IS-513\"D\" quality) galvanised as per IS-277 with ZINC of 120GM/SQM .Windows /ventilators having frame suitable fordual shutter i.e. inner and outer shutter with grill, glazed and wire mess shutter and all fitting, fixtures accessories incl6mmx12mm flat ironwith 10mm square bar M.S. grills complete as specified and shown in drawing No CEAF/STD-191/2014, sheet 1/2 & 2/2 dated 11.12.14(4000 series) including taking down existing windows / ventilators of any description. |
| 6 | Supply and fixing windows/ ventilators fabricated from 0.60mm thick rollformed section made of galvanisedsteel powder coated (Base steel as per IS-513\"D\" quality) galvanised as per IS-277 with ZINC of 120GM/SQM .Windows /ventilators having frame suitable forsingle shutter with grill, glazed shutter and all fitting, fixtures accessories incl 6mmx12mm flat ironwith 10mm square bar M.S. grills complete as specified and shown in drawing No CEAF/STD-191/2014, sheet 1/2 & 2/2 dated 11.12.14(3000 series) including taking down existing windows/ventilators of any description. |
| 7 | Hacking out old broken glass (any thickness, size, quality or description) from wooden/ Steel /Aluminium framesglazed with putty or fixed with bead. (Old bead to be reused to fix glass) complete all as specifiedand directed by Engr-in-charge. |
| 8 | Supply & fix sheet glass 4mm thick of selected quality n exc. 0.5 Sqm each fixed to steel frame work with oil puttycomplete all as specifiedand directed by Engr-in-charge. |
| 9 | S&F 4mm thick frosted floatglass and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specifiedand directed by Engr-in-charge. |
| 10 | S&FStainless steel 304 grade wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed to window/door framecomplete all as specifiedand directed by Engr-in-charge. |
| 11 | S&Fin repair Stainless steel 304 grade wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed to window/door framecomplete all as specifiedand directed by Engr-in-charge. |
| 12 | S&F factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with mild steel square tube completeall asspecified and directed. |
| 13 | S&F in frame at site factory made solid PVC Moulded Door shutter30mm thick with 2, 4 or 6 raised pannels design with 2mm thick Moulded PVC Sheet on front faceand 2mm plain colour PVC sheet on back face of particle board core as per specification & drawing. |
| 14 | S&F framed work as in doors chowkats or gates of angle iron or other section with gusset plates, rails braces etc complete drilled for fixing of steel sheeting or other covering doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel handing doors fittingscomplete all as specified and directed. |
| 15 | S&F 30 mm thick Flush shutters, solid core construction, with block board core & plywood face panels, commercial type on both sides complete all asspecified and directed. |
| 16 | S&F 2nd class HW glazed and Skeleton 35mm thick shutters, open rebated and prepared to receive glass gauze etc (with out sash bars) edges of framing plain, chamferedor rounded, fitted with cut and mitred beads for securing glass. Gauze etc complete all asspecified and directed. |
| 17 | Taking down of old unserviceable Cupboard incl all fixture and fittings. Note :- For measurement superficial area in elevation will be measured only. |
| 18 | S&F factory made18 mm thick pre laminated PVC Celluca ply for cup board shutters including provision of shelves, partiations,fixed with steel screws and solvent cement adhesive including 1mm thick lipping all around the edges complete all as per manufactured instructions. The celluca ply shall be manufactured by an ISO9000 certified company and celluca ply density shall not less than 600 kg/Cum. |
| 19 | S&F continous piano hinges, mild steel, bright finish or electrogalvanised of width of flap 30mm |
| 20 | M &L for125 mm magnetic catches with brass body and striking plate including letting in and fixed. |
| 21 | S&F of 125 mm Hasp and staple, safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws |
| 22 | M&L for two coats of synthetic enamel paint over a coat of pink primer on new wood surfacecomplete all as specifiedand directed. |
| 23 | S&F 100 mm long butt hinges medium weight cold rolled mild steel alloy with galvanized complete all as specifiedand directed. |
| 24 | S&F 150 mm long Aluminium door handle, cast type, anodized complete all as specifiedand directed. |
| 25 | S&F 100 mm long Aluminium handles, cast type, anodised complete all as specifiedand directed. |
| 26 | S&Fof 150 mm long Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specifiedand directed. |
| 27 | S&F of 75 mm long Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specifiedand directed. |
| 28 | S&F door stopper of aluminium, alloy body and tongue with hard drawn steel spring fixed in floors of 140 mm overall length of cover plate complete all as specifiedand directed. |
| 29 | S&F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specifiedand directed. |
| 30 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specifiedand directed |
| 31 | M&L for PCC 1:2:4 type B-1(20mm graded aggregate), 25mm thick as in sub base to the tile flooring complete all as specified and directed. |
| 32 | M&L for non skid ceramic colouredtiles 7 to 8 mm thick(square/rectangular) area of each tiles exc 0.11 sqm but n. exc 0.18 sqm, in floors or dado etc set and jointed in neat cement slurry and pointed in coloured cement to match over 15 mm thick screed bed or bedding layer in cm (1:4) complete all as specified and directed. |
| 33 | M&L forvitrified double chargetiles 8 to 10 mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floorsetc, set and jointed in neat cement slurry and pointed in white or coloured cement to match etc over 15 mm th screed in cement mortar 1:4 complete all as specified and as directed by Engineer-in-Charge. |
| 34 | M&L for Glazedcoloured ceramic tiles in vertical surface 300x 600x 7 mm/ 300X 450X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over 10 mm thick rendering in cement mortar 1:4 complete all as specifiedand directed. |
| 35 | S&F in repairs sinks made of stainless steel 1.0 mmthickkitchenorlaboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed by Engr-in Charge. |
| 36 | M&L for repair to broken sides/bottom of roof projection , facia by all means i.e. either by cement plaster of any thickness or by cement concrete 1:1.5:3 (nominal mix) type A-0, using 12.5 mm graded stone aggregate etc, using chicken wire mesh to reinforce & form work as required with Two coats of Appex paint over primer complete all as specified and as directed by the Engineer-in-Charge. |
| 37 | M&L for preparation of old decorated surfaces of walls including washing, rubbing down and stopping of distempered and painted surfaces and applying one coat of oil bound distemper (white/ tinted) on walls complete all as specified and as directed by the Engineer-in-Charge. |
| 38 | M&L for preparation of old decorative surfaces including scraping down smoke dust mould, mass and efflorescent, salt and trading oils and greasy spot etc. on ceiling including cornices, plasters etc. (plastered or unplastered surfaces) and applying one coat of white (lime) wash on old washed surfaces all as specified complete. |
| 39 | Taking down cement or cement lime plaster of any description on brick or stone walls etc including ranking out joints hacking for key scrubbing down with water etc complete all as specified and as directed by the Engineer-in-Charge |
| 40 | M&L for rendering 15mm thick on fair faces of brick work/stone work or concrete surfaces (Cement plaster 1:6) finished even and smooth without using extra cement complete all as specified and as directed by the Engineer-in-Charge |
| 41 | M&L for rendering 5mm thick cement mortar (1:3) as in ceiling, soffit of staircase, chhajjas facia etc including cement slurry etc complete all as specified and as directed by the Engineer-in-Charge. |
| 42 | M&L for Oil bound distemper two coats over a coat of primer including preparation of newly plstered surfaces of walls or unplastered surfaces of walls complete all as specified and as directed by the Engineer-in-Charge. |
| 43 | M&L for three coats of white wash on ceilingsoffit of staircase, chhajjas facia etc newly plastered surfaces including preparation of newly plastered surfaces or unplastered surfaces complete all as specified and as directed by the Engineer-in-Charge. |
| 44 | M&L for preparation of old painted wooden surface of any description, not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint. complete all as specified and as directed by the Engineer-in-Charge. |
| 45 | M&L for one coat of synthetic enamel paint including preparation of old decorated steel surfacesof any description over 10 Cm width or girth not otherwise described. complete all as specified and as directed by the Engineer-in-Charge. |
| 46 | Taking down or up steel water tubing and connections including cleaning for re-fixing/ credit of 15 mm borecomplete all as specified and directed by Engineer-in-Charge. |
| 47 | All as per above Item No 46 but 20 mm bore. |
| 48 | S & F steel water tubing, galvanised,medium grade, ISI marked with all fittings andfixed on walls and ceilingsor laid in floors bore of pipe 15 mm complete all as specified and directed by Engineer-in-Charge. |
| 49 | All as per Item No 48 above but 20 mm bore. |
| 50 | S&F in repair to rotational moulded vertical water storage tanks triple layer ( White colour) with closed tops ( cylindrical ) hoisted and fixed in position 500 litre capacity including disconnecting and refixing the existing GI fitting and pipe complete all as specified and directed by Engineer-in-Charge. |
| 51 | S&F in repair to rotational moulded vertical water storage tankstriple layer ( White colour) with closed tops ( cylindrical ) hoisted and fixed in position 1000 litre capacity including disconnecting and refixing the existing GI fitting and pipe complete all as specified and directed by Engineer-in-Charge. |
| 52 | S&F in repair ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed suitable for iron pipe 20mm bore having weight not less than 210 gms complete all as specified and directed by Engineer-in-Charge. |
| 53 | S&F in repairs HDPE PVC lid (cover) for 500/1000 Litres capacityPVC tank complete all as specified and directed by Engineer-in-Charge. |
| 54 | S&F in repair gate valves gun metal with iron wheel head screwed both ends for iron pipe and fixed 20mm bore fixed complete all as specified and directed by Engineer-in-Charge. |
| 55 | S&F in repair bib taps long body , cast copper alloy, fancy type with crutch or butterfly handles, chromium plated, screwed down to iron pipes or for brass ferrule of 15 mm borecomplete all as specified and directed by Engineer-in-Charge. |
| 56 | S&F in repair stop valves, cast copper alloy, fancy type, chromium plated with long shank & cup (concealedtype) with crutch or butterfly handle, screwed both ends for iron pipe of 15 mm bore complete all as specified and directed by Engineer-in-Charge. |
| 57 | S&F in repair stop valves, cast copper alloy, fancy type, chromium plated with crutch or butterfly handle, screwed both ends for iron pipe of 15 mm bore complete all as specified and directed by Engineer-in-Charge. |
| 58 | S&F in repair two way stop valves, cast copper alloy, fancy type, chromium plated with crutch or butterfly handle, screwed both ends for iron pipe of 15 mm borecomplete all as specified and directed by Engineer-in-Charge. |
| 59 | S&Fin repair 15 mm pillar taps swan neck cast copper alloy, with capstan heads, chromium plated screwed down high pressure, with or without lettered \"Hot\" or Cold with long screwed shanks and fly nutsscrewed for iron pipes and fixed , fancy typecomplete all as specified and directed by Engineer-in-Charge. |
| 60 | S&F in repair brass chromium plated waste coupling 32mm bore WHB complete all as specified and as directed by Engineer-in-Charge. |
| 61 | S&F in repair 15mm dia PVC Connection 450 mm long with brass nuts complete all as specified and as directed by Engineer-in-Charge. |
| 62 | S&F in repair 10 litre PVC valve less symphonic action type Low levelflushing cistern with inlet ball valve float and handle incl CIbracketand 32mm bore PVC flush pipe and connection to pipe complete all as specified and as directed by Engineer-in-Charge. |
| 63 | S&F in repair CP Towel rail 450mm long 20mm dia fixed with and including chromium platedbrass screws and wooden/plastic cleatscomplete all as specified and as directed by Engineer-in-Charge. |
| 64 | S&F in repair glass shelf assembly consisting of 5.5 mm thick sheets glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed by Engineer-in-Charge. |
| 65 | S & Fin repair corner glass shelf with bracketof Make-BEA-46 of Prayag or equivelent IN MARCO/ ZIM complete all as specified and directed. |
| 66 | S&F in repairs vitreous china wash down water closet pan (Pedestal pattern) excluding flushing cistern and flush pipe and including P or S trapcomplete all as specified and as directed by Engineer-in-Charge. |
| 67 | S&F in reapir vitreous china squatting pan “orrisa” pattern of size 580mmx440mm “white” with integral foot rest (excluding flushing cistern and flush pipe) incl provision of cement concrete bedding, CI ‘P’ trap 100mm dia connection to trap and flushing pipe, anti-syphonage complete all as specified and directed by Engineer-in-charge. |
| 68 | S&F in repairsCP bottle trap with internal partition 32mm size 300 mm x 190 mm with wall connection pipe and wall flange complete all as specified and as directed by Engineer-in-Charge. |
| 69 | S&F in repairs 32mm bore and 75cm long PVC flexible waste pipe for WHB complete all as specified and as directed by Engineer-in-Charge. |
| 70 | S&Fin repair 900mm x 600mm x 5mm thick fancy type designer fancy looking mirror of selected quality glass, mounted on 12mm thick board base and sealed the edges with PVC taping and fixed to PVC plug with chromium plated brass screws and cup washers complete all as specified and as directed by Engineer-in-Charge. |
| 71 | S&F in repairs vitreous china wash hand basin of size 550 mm x 400 mm white, flat back incl angle iron bracketsincl waste pipe of 32 mm dia of suitable length, pvc connection of 15 mm dia & 450 mm long with PTMT nuts with 32 mm dia brass chromium plated bottle trap and waste coupling complete all as specified and as directed by Engineer-in-Charge. |
| 72 | S&F in repairplastic water closet seat cover white closed pattern with flat bottom and cover incl mild steel chromium plated hinging device complete all as specified and as directed by Engineer-in-Charge. |
| 73 | S&F in repair Hand Shower (Health Faucet) with 1 Meter Long Easy Flex Tube in Chrome Finish & Wall Hookcomplete all as specified and as directed by Engineer-in-Charge. |
| 74 | S&F in repairs mild steel chromium plated grating (round) 125/150mm dia fixed over floor/nahani trap (with hole and without hole) complete all as specified and as directed by Engineer-in-Charge. |
| 75 | S& Finrepair110 mmborePVC (SWR ) pipesinglesocketedinany lengthwithrubber ringjoints, laidintrenchesorinfloorsetcincludingremovingfromsite completeallasspecifiedanddirectedbyEngr - in- charge. |
| 76 | S&F in repair PVC (SWR) bends any radius for 110 mm bore PVC pipe with cement joints complete all as specified and as directed. |
| 77 | S& Finrepair75 mmborePVC (SWR ) pipesinglesocketedinany lengthwithrubber ringjoints, laidintrenchesorinfloorsetcincludingremovingfromsite completeallasspecifiedanddirectedbyEngr - in- charge. |
| 78 | S&F in repair PVC (SWR) bends any radius for 75 mm bore PVC pipe with cement joints complete all as specified and as directed. |
| 79 | Supply and fixing in repair Door seal, length varied from 750 mm to 900 mm complete all as specified&directedby engineer in charge . |
| 80 | S&Fin repair of150 mm long Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specifiedand directed. |
| 81 | S&F in repair 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specifiedand directed. |
| 82 | S&F in repair mild steel helical door spring 300 mm ordinary rat tail type incl roller and roller plate complete fixed with screws to wooden frame or with welding to steel frames complete all as specifiedand directed by Engr-in-charge. |
| 83 | S&F Drappery curtain rods decorative type stainless steel 304 Grade, 25mm nominal diaand having wall thickness 1.40 mm of approved quality/make including fixing oftwo number decorative brackets fixed in brick/concrete wall, Two number knob on both ends of curtain rods ( The length of each curtain rod will be 1.00m to 2.50m long) complete all as directed and specified. |
| 84 | S&F in repair 100 mm long butt hinges medium weight cold rolled mild steel alloy with galvanized complete all as specifiedand directed. |
| 85 | S&F in repair aluminium frame powder coated any colour(minimum thickness of powder coating 50 micron) for doors, windows, partiations, ventilators with one or more rebates including joining cleat for fixing etc. (without taking off shutters from the frames) complete all as specified |
| 86 | M/Lfor Powder coatedaluminium door shutters, aluminium section weighing 1.3 kg/m approx including each shutter having 2 Nos. ‘D’ type aluminium handles of 200 mm long,2 Nos. aluminium tower bolts of 200 mm long and 1 No. mortice lock of 6 lever with key in duplicate, regulated by double action hydraulic floor door spring, shutter partly glazed with 5.5 mm thick sheet glass and partly panelled with 12 mm thick pre-laminated particle board fixed with glazing clips, rubber beadings and aluminium beading complete all as specifiedand directed. Note:- ( Glass & Prelaminated particle board paid separately) |
| 87 | Supply and fix sheet glass 5.5 mm thick of selected quality (tinted glass) exc. 0.5 sqm each fixed to aluminium frame work with necessary rubber beading complete all as specified and directed by Engineer in Charge,. |
| 88 | Demolition of cement concrete in sunken portion in any position not otherwise specifically provided for complete all as specifiedand directed by Engr-in-charge. |
| 89 | M & L for 25 mm thick PCC1:2:4 type B0 (12.5mm graded aggregate) as in sub base for floor complete all as specifiedand directed by Engr-in-charge. |
| 90 | M&L for Providing and laying 20mm thick cement mortar plaster for the protection of the treatment in 1:3 mixed with Dr Fixit Pidiproof LW+complete all as specified and directed by Engineer in Charge,. |
| 91 | M & L for Providing and making fillet of 75mmx75mm in size with cement concrete in 1:2:4 in sunken portion, complete all as specified and directed by Engr-in-charge. |
| 92 | M&L for providing and applying two component based treatment having DGT of 1mm in two coats making an excellent impermeable coating by the name Dr Fixit Pidifin 2K. Surface to be prepared by cleaning with wire brush, removing all loose aggregate complete all as specified and directed by Engineer in Charge. |
| 93 | M&L for Refilling Lime concrete with brick aggregate (Course) in lime mortar1:3, 300mm thick in the sunken with the help of proper tools & equipments & plants complete all as specified and directed by Engr-in-charge. |
| 94 | M&L for Providing and making cement concrete in 40mm thickness in 1:2:4 type B0 (12.5mm graded aggregate) mixing Dr Fixit Pidiproof LW+. Complete in sunken upto the below level of tiling complete all as specified and directed by Engr-in-charge. |
| 95 | M&L for Providing and applying two coats making an excellent impermeable coating by the name Dr Fixit Pidicrete URP. Surface to be prepared by cleaning with wire brush removing all loose aggregate complete all as specified and directed by Engr-in-charge. |
| 96 | M & L for Cleaning and removing all scales and dirt, etc, from water tanks and from mouths of circulating pipes,etc (capacity of tank exc 250 ltrs & n exc 500 ltrs) and writing date of cleaning on water tank. complete all as specified and directed by Engr-in-charge. |
| 97 | S & Fin repairPTMTlong body bib tap 15mm dia pipe with crutch or butter fly handle screwed down, screwed for iron pipe and fixed complete all as specified and directed by Engr-in-charge. |
| 98 | S&F in repair PVC (SWR) gully trap 125/110 mm setting and jointing with solvent |
| 99 | S&F in repair PVC (SWR) floor trap 75mm with grating includingjointing with solvent |
| 100 | Supply and fixing in repairs Aluminium die cast Door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 36 to 60 kg complete all as specifiedand directed. |
| 101 | S&F light shade vitrified tiles9 to 10 mm thick ( Square/rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in floors etc set and jointed inneat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bedinCM 1:6 complete all as specified and directed.. |
| 102 | All as per item No 101 above but in vertical surfaces such as dado/skirting over and includingrendering 15 mm thick in cement mortar 1:4 complete all as specified and directed. |
| 103 | Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and directed. |
| 104 | M&L machine cut pre polishedkota stone slab flooring 20-25 mm thick over cement screed base 15 mm thick in cement mortar 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete. |
| 105 | All as per item No 104above but in vertical surfaces such as dado/skirting over and includingrendering 15 mm thick in cement mortar 1:4 complete all as specified and directed. |
| 106 | M&L 75mm thick PCC 1:3:6, type C-2 using 40mmgraded stone aggregate as in plinth protection finished even & fair including making groove not exc 3.00 meter interval and filling the same with mixture of sand and bitumencomplete all as specified and directed. |
| 107 | M&L cement concrete 40mm thick type B-1, 1:2:4 (using 20mm graded stone aggregate) in floors pavings etc finished even & smooth with out using extra cement. |
| 108 | S&F glass dividing strips 3mm thick and 38mm wide inserted in position. |
| 109 | Demolition of brick work or stone masonry including pillars, cornices,arches etc built incement mortar or cement lime mortar complete all as specified and dircted, |
| 110 | M&L brickwork with fly ash bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4. complete all as specified and dircted, |
| 111 | M&L brick work with fly ash bricks, straight or curved on plan exc 6m mean radius in CM 1:4 complete all as specified and directed. |
| 112 | M&L cement plaster 15mm thick inCM 1:4 on brick or concrete surfaces on external surfaces finished even and fair complete all as specified and directed.. |
| 113 | M&L applying three coats of white washon wallincluding preparation of newly plastered surfaces of wall complete all as specified and directed. |
| 114 | M&L applying two coats of super quality weatther proof exterior emulsion paint over & incl one coat of primer from the same manufacturer onexternal wall surfaces including preparation of new plastered surfaces on walls complete all as specified and directed, |
| 115 | M&L for non skid ceramic colouredtiles 7 to 8 mm thick(square/rectangular) area of each tiles exc 0.18 sqm but n. exc 0.38 sqm, in floors or dado etc set and jointed in neat cement slurry and pointed in coloured cement to match over 15 mm thick screed bed or bedding layer in cm (1:4) complete all as specified and directed. |
| 116 | All as per item No 115 above but in vertical surfaces such as dado/skirting over and includingrendering 15 mm thick in cement mortar 1:4 complete all as specified and directed. |
