|
| 1 | Taking down chowkats or frames incl shutters (without taking off shutters from the frames) n.exc. 1.50 sqm each, and removing from site, complete all as specified and directed. |
| 2 | Taking down chowkats or frames incl shutters (w/o taking off shutters from the frames) exc. 1.50 sqm but n.exc. 4 sqm each and removing from site, complete all as spfd and directed. |
| 3 | S&F Mild steel door frame by using M.S angle/flat iron including M.S butt hinges 100mm size, formial provision of double rebate to recive door shutter including necessary hold fast and pcc block in cement concrete 1:2:4 type B1 complete all as specified and directed. |
| 4 | M&L mild steel hold fast & similar articles confirming to Fe-290 Gde E-165 complete all as specified and directed. |
| 5 | M&L PCC 1:2:4, type B-0 (Using 12.5mm graded stone aggregates) as in filling of steel chowkats or frames, cills and hold fast etc.complete all as specified and as directed. |
| 6 | S&F 35mm thick Glazed and skeleton shutters using second class hard wood, open rebated and prepared to receive glass, gauze, etc. divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed. |
| 7 | Materialand labourfor 18mm thickMulti layerwaterproof plywood(Make-Radium/sunriseorequivalent fixedwithscrewstotimberframeworkforcabinetcarcasebothsidescoveredwitho.80mmthick decorativelaminates,\"Mica\"type1ofsurfacefinished,colourandpatternasapprovedfixedwith approved adhesive as per makers instructions complete all as specified and directed. |
| 8 | S&F35mmthickFlush shutters \"factory made\", solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed. |
| 9 | S&F Galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples/wooden beads complete all as specified and directed. |
| 10 | M&L for preparing new wood and wood based surfaces by knotting, stopping etc of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified. |
| 11 | S&F 3 mm thick Sheet glass ordinary quality and glazing with oil putty in squares n.exc. 0.50 sqm in each pane, complete all as spfd and directed |
| 12 | S&F 3 mm thick figured glass pin head type and glazing with oil putty in squares n.exc. 0.50 sqm in each pane, complete all as spfd and directed |
| 13 | S&F solid PVC door frame of size, 50x47mm, made out of 5mm thick plain colour PVC sheet, reinforced with MS square tube fixed with screw/plugs to brick walls complete all as specified and directed. |
| 14 | S&F Factory made solid panel PVC door shutter 30mm thick (stile) consisting of frame made out of MS tubes for top and bottom rails.MS frame shall be covered with heat moulded plain colour PVC channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rails and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to in stiles & rails with suitable PVC sheet beading and joinned together with solvent cement S&F in frames at site as per specification and drawing shown in SSR Part-II, complete all as specified and directed. |
| 15 | S&F Steel windows with Glazing bars and side hung shutters including Box type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified. |
| 16 | S&F Steel windows with out glazing bars side hung shutters including Box type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or weldedincluding Galvanised MS wire cloth 0.56 mm nominal dia of wire and average width of apperture 1.18 mm fixed with M.S beads of size 12mmx3mm by using Stainless steel screws complete all as specified. |
| 17 | S&F Steel Ventilator with top hung shutter including hinges, steel pegstay complete all as specified. |
| 18 | S&F mild steel framed work such as grills for aluminium windows, gratings etc with ends of bars shouldered and / or riveted or forged into spikes framed guard bars barred iron doors ladders framed balusters walkways railingsframework of water tanks and similar work conforming to Fe 290 Grade E-165complete all as specified and directed. |
| 19 | M&L Preparing of new surfaces of steel of any description, over 10 cm width or girth not other wise described and appliying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome primer, complete all as specified and directed. |
| 20 | M&Lfor built in steel cup board with pressed steel frame of size 75 mmx45mmx1.25 mm th with pressed steel shutter 1mm th Godrej pattern fixed to masonry wall by hold fast made out of 25x3 mm flat iron including ms hanging rod of 10 mm dia with bracket fixed on inner side of one leaf of shutter and on other leaf provision of ms peg set of 3 pegs including spray including locking arrangement painting with two coats of synthetic enamel paint over one coat of red oxide primer all around and both sides on steel surface of frame & shutter and making good disturbed portion in cm 1:3 or PCC 1:2:4complete all as specified and directed. |
| 21 | S&F Mild steel cold rolled butt hinges, medium weight, 100mm long, complete all as specified and directed. |
| 22 | S&F Aluminium anodised barrel tower bolt of extruded section, 150mm long complete all as specified and directed. |
| 23 | S&F Aluminium anodised barrel tower bolt of extruded section, 200mm long complete all as specified and directed. |
| 24 | S&F 150mm long aluminium handle, cast type, anodised complete all as specified and directed. |
| 25 | S&F Mild Steel sliding door bolts, 300 mm long, plate type, stove enamelled black, with bright bolts not less than 12mm dia with & including a minimum of 6 boltsand nuts, four on bolt plate and two on staple plate etccomplete all as specified and directed. |
| 26 | S&F300 mm long MS ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed. |
| 27 | S&F 2 nd class hard wood Small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including all necessary\" labours; articles n exc 200 cu. cm eachcomplete all as specified and directed. |
| 28 | Dismantling floor, hearth wall tiling incld cement mortar bedding (but not backing) removing servicable tiles to store & rubbish off the premises complete all as specified and directed. |
| 29 | M&L forjoint free coloured glazed ceramic tiles 7 mm to 8 mm thick of size 300x 450x 7 mm, 300X 600X 7mm as in skirting / dado etc laid over and including 10 mm thick backing coat in cement mortar 1:4, set and jointed in neat cement slurry and pointed with coloured cement to match the tiles complete all as specified and directed. |
| 30 | M&L for Non skid, joint free coloured ceramic tiles 7 to 8 mm thickarea of each tile 300X300 mm / 400X400 mm as in floors etc laid over and including 15 mm thick screed bed or bedding layer in cement mortar 1:6, set and jointed in neat cement slurry and pointed with coloured cement to match the tiles complete all as specified and directed. |
| 31 | M&L for Non skid (Matt finish/Sugar finish) of joint free (edge cut) coloured ceramic tiles 7 to 8 mm thickarea of each tile 600 x600 mm as in floors etc laid over and including 15 mm thick screed bed or bedding layer in cement mortar 1:6,set and jointed in neat cement slurry and pointed with coloured cement to match the tiles complete all as specified and directed. |
| 32 | ditto as above item No 33 but in skerting.including 10 mm thick backing coat in cement mortar 1:4, set and jointed in neat cement slurry and pointed with coloured cement to match the tiles complete all as specified and directed. |
| 33 | M&L for cement concrete type B-1, 1:2:4 (20mm graded stone aggregate) 25mm thickas in leveling course offlooring & roof complete all as specified and directed. |
| 34 | Demolition of stone slabs and tiles laid beddedof any description or any thickness in floors, aprons etc. complete all as specified and directed. |
| 35 | M&L 18 to 20mm thick granite (of any type) tiles, bedded and jointed with grey cement slurry and pointed with white cement (1:2) with admixture of pigment to match the shade of granite stone incl grinding and polishing complete over 15mm thick screed bed in CM 1:6,complete all as specified and directed. |
| 36 | Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided, complete all as specified and directed. |
| 37 | M&L RCC 1:2:4, type B-1 (using 20mm stone aggre) as in slab supported on walls, beams and columns in floors, roofs, landing, balconies, canopies, deck slabs and in shelves and the like, complete all as spfd and directed. Note -Reinforcement if used shall be measured and paid separately under relevant item. |
| 38 | M&L Form work to sides and soffits of suspended slab, such as roof slab, floor slab, landing and similar work n.exc. 200mm thick (horizontal or sloping) for fair finished surfaces, complete all as specified and directed. |
| 39 | M&L TMT bars 10mm dia and over, cut to length, bent to shape reqd, incl cranking, bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire (annealed) not less than 0.9mm dia, complete all as spfd and directed. |
| 40 | Taking down cement plaster incl tiles of any description on brick or stone or cement concrete walls incl raking out joints, hacking for key, scrubbing down with water etc,complete all as specified and directed. |
| 41 | M&L Rendering 12 mm thick in cement mortar 1:6 on fair face of brick work/ concrete surfaces (either surfaces) of wall and finished even and smooth without using extra cement complete all as specified and directed. |
| 42 | M&L Rendering 5 mm thick in cement mortar 1:4 over a layer of 10mm thick rendering in cement mortar 1:6 on fair face of brick work/ concrete surfaces of wall with water proofing admixturefinished even and smooth without using extra cementcomplete all as specified and directed. (WPC will be measured and paid separatly) |
| 43 | M&L Rendering 5mm thick on concrete surfaces as in facia or ceiling in CM 1:3 finished even and fair without using extra cement, complete all as spfd and directed. |
| 44 | M&L for preparing newly plastered surfaces of walls and applying three coats of white wash complete all as specified and directed. |
| 45 | M&L for complete removal of existing decorative treatment of any description of ceiling, cornices etc including washing and rubbing down etc and applying two coats of white wash complete all as specified and directed. |
| 46 | M&L for preparation of newly plastered surfaces of walls and applying 2.00mm thick wall care putty of approved make on wall surfaces and two coats of oil bound distemper (White or tinted) over a coat of primer complete all as specified and directed. |
| 47 | M&Lpreparationofnew plastered surfaceofwall and applying 2mm thick wall care putty and making the surface smooth and applying andFinishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) on wall surfaces complete all as specified and directed. |
| 48 | M&L Preparation of newly/old plastered surfaces of walls and applying two coats of colour wash on walls complete all as specified and directed. |
| 49 | Dismantling of floor of WC and bath not exc 300mm deep and removing out the cinder/concrete from sunken portion, cleaning of RCC surface to remove dust, loose particle with compressed air or any other suitable method depending on site conditions, grinding any sharp edges etc complete all as specified and directed. (b) Cleaning or RCC surface to remove dust, loose particle etc with compressed air or any other particles or any other suitable techniques on site conditions etc.(c) M&L for a glass fiber reinforced acrylic modified cementitious coating system with base coat@ 1.50 Kg/Sqm glass fiber reinforcement and top coat with Sika Top® Seal-107 @ 1.50 Kg/Sqm or equivalent of Fosroc or MC Bauchemie India Pvt Ltd.(d) M&L for protection plaster 15mm thick on cement mortar 1:3 admixed with appropriate integral water proofing compound with as specified.(e) M&L for providing 25mm dia GI pipe spout projecting at least 150mm beyond outer face of wall.(f) M&L for sunken portion filled with 40 mm graded brick bats and finished with 50 mm thick PCC 1:2:4 type B1 all as specified and directed.(g) The area of Each WC portion is n.exc 2.00Sqm each.(h) Cost of the above aspect shall be deemed to be included in the quoted rates of the respective item and nothing extra shall be paid on this account.Note : The work will be executed by authorised manufacturers/applicator. |
| 50 | M&L for repairing the edges / corner of Chajja / roof projection and similar work by removing of plaster width / girth exceeding 15 cm & n exc 30 cm and making good with 15 mm thick rendering in cement mortar 1:3 to match with including chicken wiremesh netting of weight not less than 2.0 Kg per Sqm on existing surface complete allas specified and directed. |
| 51 | Demolition of brick work or stone / boulder masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and directed . |
| 52 | M&L for brick work in cement mortar (1:6) using old size sub class ‘B’ bricks, straight or curved on plan exc 6 m mean radius complete all as specified and directed. |
| 53 | Demolition of concrete etc in ground floors and paving n exc. 15cm thickness (below or above ground level) un-reinforced concrete & removal of rubbish off outside defense land complete all as specified and directed. |
| 54 | M&L 75 mm thickcement concrete 1:3:6 type C-2 (40mm graded aggrete) as in plinth protection/path finish even and smooth without using extra cement complete all as specified and directed. |
| 55 | Demolition/ Dismantling of 75/110 mm dia PVC drain pipes/(Salt glazed ware, AC or Reinforced concreteset in cementmortar removing where directed complete all as specified and directed. |
| 56 | S&F in repair 75 mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls as rain water pipe and similar workincluding taking down old existing pipe complete all as specified and directed. |
| 57 | S&F in repair 110 mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls as rain water pipe and similar workincluding taking down old existing pipe complete all as specified and directed. |
| 58 | S&F PVC (SWR) bends 75 mm bore dia complete all as specified and directed. |
| 59 | S&F PVC (SWR) bends 110 mm bore dia complete all as specified and directed. |
| 60 | S&F PVC (SWR) branch piece,110 mm bore single (single Y) equal or unequal complete all as specified and as directed. |
| 61 | S&F in repair 75mm PVC (SWR) multi floor trap with grating including jointing with solvent cement including dismentling of old one and making the surface good complete all as specified and directed. |
| 62 | S&F 500 ltr Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc and including 25 mm size Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe (including dismantling) complete all as specified and directed. |
| 63 | S&Fin repairs Vitreous china squatling pan water closet, orissa pattern, size 580 x 440 mm white with integral foot rests (excluding flushing cistern and flush pipe) including PVS (SWR) \"S\" trap,provn of lime concrete and jointing to flush pipecomplete all as specified and directed. |
| 64 | S&Fin repairs Vitreous china, wash hand basin with pedastral (white) of size 550mmx400mm including brass CP waste coupling 32mm dia with long screwed shank and fly nuts, PVC medium grade 32mm dia waste pipe, chain and plug, porcelain stopper , PVC connection 15mm dia, 450mm long with brass CP nuts and washers at both ends complete all as specified and as directed. |
| 65 | S&F in repairs 10 Liter capacity PVC symphonic action type flushing cistern (ISI Marked) low level with inlet ball valve, float and handle & PVC flush pipe, fixed in position and connecting complete all as specified and as directed. |
| 66 | S&Fin repairs PVC Connections 15 mm size with PTMT nuts of length 450mm complete all as specified and as directed. |
| 67 | S&F In repair Tubular towel rail, 20mm dia, 60 cm long, CP with a pair of brackets, fixed to wall with CP brass screw and PVC rowl plugs ,complete all as specified and as directed. |
| 68 | S&F in repair Stainless steel cromium plated Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed. |
| 69 | S&Fin repairs 600mm x 450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC plain building board or commercial ply wood and fixed to wooden plug with chromium plated brass screw and cup washers complete all as specified and as directed. |
| 70 | S&F in repair bib taps 15mm bore cast copper alloy long body fancy typewith crutch or butterfly, handle, screwed down, screwed for iron pipe complete all as specified and as directed. |
| 71 | S&F in repair 15 mm bore stop valve/angle cock cast copper alloywith screwed down high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and as directed. |
| 72 | S&F in repair20 mm Gun metal Gate valves fitted for iron pipe complete all as specified and as directed. |
| 73 | S&F swivel shower of PTMT any colour for fixing with 15mm dia pipe (Min weight 40 gms) complete all as specified and as directed. |
| 74 | S&F shower arm 15mm size 195mm long with bend of 45 degree with flange of PTMT any colour(Min weight 40 gms) complete all as specified and as directed. |
| 75 | Taking up or down steel tubing and connections for pipe complete all as specified and directed.(a) 15 mm bore GI tubing |
| 76 | (b) 20 mm bore GI tubing |
| 77 | S&F GI water tubesmedium grade with all fittings and fixedcomplete to walls and ceilling or laid in floors Of Concealed type all as specfied and as directed(a) 15 mm bore GI tubing |
| 78 | (b) 20 mm bore GI tubing |
| 79 | 40 mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished, complete all as specified and directed |
| 80 | S&F Stainless steel cold rolled butt hinges, medium weight, 50 mm long, complete all as specified and directed. |
| 81 | S&F in repairstainless steelsink AISI 316 grade without drainage board of 1 mm thickwith plug , washer and waste, including bedding in cement mortar to dwarf wall or including CP Waste , PVC Down pipe etc andfixing cantilever brackets and connecting union to pipe overall size 495mm x 420mm bowlsize 410mm x 330mm x 160mm or more complete all as specified and directed. |
| 82 | S & F 25mm MS steelcurtainrod withfancy typebracket andend caps completeallasspecifiedand directed. |
| 83 | M&L 75 mm thick, PCC 1:3:6 type C-2 (using 20mm graded crushed stone aggregates) as in path finished even and smooth without using extra cement, complete all as specified and directed. |
| 84 | M&L machine pressed pre castconcrete interlocking paver ( with grey cement and pigment) any shape and size confirming to IS -15658-2006 of 60 mm thickness ,M-35 grade over and including 25mm thick sand cushioning layer complete all specified and directed |
| 85 | Dismantling brick tiles or terracing tiles, single layer on roofs complete all as specified and directed |
| 86 | Demolition of mud in roofs andy thickness incl plastering and leeping (wheather full thickness removed or only a part thereof) complete all as specified and directed |
| 87 | M&L for providing cement concrete type B-1, 1:2:4 (20 mm graded aggregate) as in padding/ mass concrete using water proofing compound complete all as specified and directed |
| 88 | M&L for screed bed 10 mm thick in CM 1:4 using coarse sand (mixed with WPC) on concrete surface of roof finished fair and even before application of APP of roof treatmentcomplete all as specified and directed |
| 89 | Material & labour for cleaning of concrete or plasteredsurfaces of roof and applying priming coat using with bituminous primer @ 0.30kg per Sqm followedevenly by a tack coat @ 1.20 kg per Sqm using 85/25 grade industrial hot blown bitumen over it laid with 3mm thickAPP modified polymeric waterproofing membrane minimum weight 3.6 Kg per Sqm reinforced with non-woven polyester fabric (weightnot less than160gmperSqm)unrolled& bondedtosubstratewithsideandendlaps75mm & 100mm asper manufacturer’s instruction andapplying over it a tack coat using 85/25 grade industrial hot blown bitumen@ 1.20 kg per Sqm and finally finished the top of polymericwater proofing membrane with a coat [email protected]’sinstructions over,completeallas specified & directed. (Note:-Removal of existing membrane laid on roofs deemed to be included in the quoted rate of this item) |
| 90 | M&L for cleaning of concrete or plastered roof surfaces and applying priming coat using bituminous primer @ 0.30 kg per sqm followed evenly a tack coat @ 1.2 Kg per sqm using 85/25 grade industrial hot blown bitumen over it laid 3 mm thick APP modified polymeric water proofing membrane minimum weight 3.6 Kg per sqm reinforced with non-woven polyester fabric (weight not less than 160 gm per sqm) rolled & bonded to substrate with side and end laps 75mm & 100mm as per manufacturer\"s instruction and applying over it a tack coat using industrial hot blown bitumen 85/25 grade @ 1.20 Kg per sqm and finally finished the top of polymeric water proofing membrane complete all as specified and directed. (Note:- Dismantling & Romoval of existing old water prrofing menbrane deemed to be included in quoted rate of this item) |
| 91 | M&L for 40 mm thick brick tiles laid on beddingin CM 1:6 using coarse sand and joints grouted flush and pointed in cement mortar (1:3) complete all as specified and directed |
| 92 | Dismantling and taking down carefully U/S copper / aluminium point wiring (light, fan, socket, power) complete fitting such as switches, ceiling roses, pendants, lamp holder, light fitting etc including CI/Pressed steel terminals, switch box, and making good the disturbed surface of wall/floor etc, to match with the existing surfaces of wall/floor complete all as specified & directed. |
| 93 | Material and labour for point wiring with1.5 sq mm PVC insulated, unsheathed, stranded copper conductor (FRLS) cable single core 1100 Volt grade in and including rigid PVC conduit medium grade 20mm dia or more ISI Marked concealed conduit and conduit accessories and cutting chases of suitable girth where required on brick/concrete surface &making gooddisturbed surface,provision of GI/Pressed steel terminal switch box with plastic laminatedsheet 3 mm thick fixed with brass screw and washers along with 1.5 sq mm PVC insulated unsheathed stranded copper conductor cable ( FRLS ) as earth wire connected with main common earth dolly complete all as specified and directed for the following :- (a)One light/fan/bell/exhaust fan point controlled by one, one-way Piano type switch 5/6 Amp complete all specified and directed. |
| 94 | (b)One 3pin/5pin 5/6 Amps socket out let on same board controlled by one, one-way Piano type switch complete all specified and directed. |
| 95 | (c) One 3pin/5pin 5/6 Amps socket out let onindependent board controlled by one, one-way Piano type switch complete all specified and directed . |
| 96 | (d)One light point controlled by two No. two way switch complete all as specified and directed |
| 97 | All as per item No 2 here-in-before but wiring with 2.5 sqmm single core multi stranded copper condcutor1100 V grade PVC insulated FRLSbut unsheathed single core for16 Amps power point on independent board and 2.5 sqmm FRLS cable as earthwire complete all specified and directed. |
| 98 | S&F switch piano flush type whitefinish 5/6Amps, single pole one way , 230 volts, 50 hz complete all as specified & directed. |
| 99 | S&F switch piano flush type whitefinish 5/6Amps, single pole two way , 230 volts, 50 hz complete all as specified & directed. |
| 100 | S &F socket out let2 pin 5/6 Amps & 3 pin 5/6 Amps flush type, 230 volts, 50 hz all as specified and directed. |
| 101 | S&F switch piano flush type whitefinish 15/16 Amps single pole one way, 230 volts, 50 hzall as specified and directed |
| 102 | S &F socket out let5 pin 15/16 Amps & 3 pin 5/6 Amps flush type, 230 volts, 50 hz all as specified and directed. |
| 103 | M&L bell push AC, SP 240 volts flush type 5/6 Amps, 230 volts, 50 hz complete all as specified and directed. |
| 104 | S&F fan regulator socket type 100W, fulsh stepped type ,electronic ,450 watt completeall as specified and directed. |
| 105 | Supply and fix in replacement of electric call bell ding dong type, AC, 240V, 50Hz complete all as specified and directed. |
| 106 | M&L ceiling rose 3 terminal / PVC/ polycarbonate, isolated body all as speccified and directed |
| 107 | Supply & fixing lamp holder (Angular/Straight ), insulated body, with back plate for batten fitting complete all as specified & directed. |
| 108 | Supply and fix LED bulb 12 watt B-22 suitable for holder complete all as specified and directed. |
| 109 | S&F LED tube light batten 20 watts 4 fts extruded aluminium housing, translucent diffuser with LED light source , 2200 lumen, natural white ,surge protection range- 2KV, voltage protection range 120-280 VAC with intergrated driver and surge protection complete all as specified and directed. |
| 110 | S&F Decorative ultra slim round profileLED Tube light fitiing with extruded polycarbonate, energy efficient for mirror light 9/10 Watt 2 ft with LED light source with uniform light output, fixed on site with all accessories all as specified & directed. |
| 111 | Taking down old unserviceable ceiling fan & S&F Ceiling fan complete with three blades down rod , accessories 230 V, 1200mm sweep with minimum air delivery of 210 CFM(BLDC)complete all as specified and directed .Note: Old Ceiling fan to be deposited in MES store Yard |
| 112 | S&F Exhaust fan Steel body AC single phase 230/240 Volt of size 300 mm sweep complete with louvers including making whole on wall to fix exhaust fan and grouting of nut bolts etc and making good the disturbed sufaces of wall all as specified and directed . |
| 113 | S&F Exhaust fan PVC body AC single phase 230/240 Volt of size 250 mm sweep with copper windingcomplete with louvers shutter including making whole and grouting of nut bolts etc and making good the disturbed sufaces of wall all as specified and directed . |
| 114 | Supply and fix water heater storage type of capacity 25 Ltr , five star rated AC sinle phase 230 volts 50 Hz, vertical mounting type with stainless steel inner tank of approved colour, with adjustable temperature, plug top and Hot and cold PVC connection complete all as specified and directed. |
| 115 | Supply and fix single pole & neutral plastic enclosure prewired power unit with 25 Amp rated MCB and 25 Amp rated 3 pin plug, 240 V, 50 Hz complete including cutting the wall surfaces for flush mounting of socket board including taking down existing unserviceable plug & socket board of any description and making good with cement plaster, putty and paint to match with the existing surface all as specified. |
| 116 | Supply and fix LED 20 watt Building security light fitting mounting type made out of one piece in pressure die-cast aluminium housing with high efficient LED as lighting source and PC Cover separate compartment for driver,including bracket clamp and fixing accessories complete with electronic driver and all accessories. The fitting shall IP 66 protection, duly prewired complete all as specified and directed. |
| 117 | Taking down old submain wiring & Supply and fixing sub main wiring two single core 6 sq mm PVC insulated unsheathed stranded copper conductor cable ( FRLS ) 1100Volts grade drawn in & including rigid PVC conduit 20mm dia or more medium grade concealed in wall along with 4.00 Sq mm PVC insulated unsheathed copper conductor cable (FRLS ) as earth wire and wire connected withmain earth dolly including cutting chasing and making good disturbed portionall as specified and directed |
| 118 | Taking down old submain wiring & Supply and fixing sub main wiring two single core 4 sq mm PVC insulated unsheathed stranded copper conductor cable ( FRLS ) 1100Volts grade drawn in & including rigid PVC conduit 20mm dia or more medium grade concealed in wall along with 2.5 Sq mm PVC insulated unsheathed copper conductor cable (FRLS ) as earth wire and wire connected withmain earth dolly including cutting chasing and making good disturbed portionall as specified and directed |
| 119 | Supply and fixing sheet metal enclosure double door type for MCBs DB SPN(Single pole and neutral) 240V AC 8 way with 200 Amps rated busbar all as specified and directed. |
| 120 | Supply & fixing MCB , SP, AC, 240 volts of 06 to 32Amps capacity 10KA, \"B\" series and making connections with suitable size of copper lugs complete all as specified & directed. |
| 121 | Supply & fixing MCB, SPN, AC, 240 volts of 40 Amps capacity 10KA, \"B\" series and making connections with suitable size of copper lugs complete all as specified & directed. |
| 122 | Supply and fix in replacement of MCCB / MCB distribution board, Vertical TPN, 4 way, 415 V, 3 phase, AC with MCCB as incomer and MCBs as outgoing in sheet steel powder painted enclosure double door type with minimum IP 43 degree of protection with built in copper bus bar, neutral link and earth link complete including cutting the wall surfaces for flush mounting of DB and making good with cement plaster, putty and paint to match with the existing surface including taking down existing unserviceable MCB DB of any description complete all as specified and directed. Note: MCCB / MCBs shall be measured and paid separately. |
| 123 | Supply and fix MCCB 125A, 16 KA, 4 Pole, 415 V, 50 Hz with fixed thermal magnetic release fixed in Vertical TPN complete all as specified and directed. |
| 124 | Dismantling & taking out old unserviceable LT Service cable & Supplying & laying in replacementofLT UG cable ( Conforming to IS 1554) ISI marked1.1 KV grade XLPE insulated PVC sheathed steel armoured aluminum stranded conductor in trenches / ducts / throughpipe under roads of size 16 sqmm 4 core complete all as specifed and directed. Note;- The earth work shall be measured and paid sepretely under appropriate item of Sch A |
| 125 | Excavation in trenches in soft/disintegrated soil not exc 1.5 m wide and not exceeding1.5m in depth forlaying UG cable/foundation etc complete all as specified and directed. |
| 126 | Returning filling in soft/disintegrated soil including spreading levelling watering and well ramming in layers n.exc 25cm each layer complete all as specified and directed. |
| 127 | Removal of excavated surplus soft/disintegrated soil to a distance not exc 50 mtrand depositing where directedat a level not exc 1.5 mtrabove the starting point complete all as specified and directed. |
| 128 | M&L river washed and screeened dry fine sand filling in trenches below and above / around under ground cable for cable protection including punniing around cable complete all as specified and directed. |
| 129 | M&L for well brunt bricks sub class \"B\" in old size as cable protection laid flat width wise complete all as specified and directed. |
| 130 | Supply and laid GI medium grade pipe for cable protection/hanging ceiling fan of size 40 mm dia complete all as specified and directed |
| 131 | Supply and fix galvanised steel water tubing medium grade including all fittings such as bends, elbows, tees, reducers, sockets, union etc and laid in floor fixed on wall or ceiling of size 20 mm complete all as specified and directed. |
| 132 | Supply and fix galvanised steel water tubing medium grade including all fittings such as bends, elbows, tees, reducers, sockets, union etc and laid in floor fixed on wall or ceiling of size 15 mm complete all as specified and directed. |
| 133 | Supply and fix or lay in trenchesgalvanised steel water tubing medium grade including all fittings such as bends, elbows, tees, reducers, sockets, union etc and laid in floor fixed on wall and ceiling complete all as specified and drected of size 20 mm bore |
| 134 | Drilling and tapping cast iron water mains (in position) for branch connection of the internal dia of 20 mm completeall as specified. |
| 135 | M&L for Straight plain brass ferrules (or connecting screws ) screwed both ends and fixed to water mains for tapping branch connection of size 20 mm bore complete all as specified. |
| 136 | Supply and Fix Gun metal gate valve, ISI marked, with iron wheel head screwed both ends for iron pipe, fixed in repairs complete of size 20 mm bore |
| 137 | S&F single phase Energy meter with LCD display, class I, base mounting of rating 10-60 Amps, AC 240 Volt, 50 HZ, confirming to IS13779 IP 54 with parameter to show data, time, current reading,, load, PF, voltage and KWHmounting on wooden box of suitable size and making incoming and outgoing electric connection complete all as specified and directed. Note: Old Energy meter to be deposited in MES store Yard |
| 138 | Supply fix and fabricate 18mm thick prelaminated Particle board , interior grade, with screws & hinges to timber/wood/welded to angle iron frame for meter box , coloured and patteren as approvedincluding hinge, locking arrangement and stainless steel bright finish handle complete all as specified and directed. |
| 139 | Supply, Installed & fix maintenance free earthing copper bonded steel earth rod of 10 feet long having diameter of 17.2mm with copper bonding thickness of 250 micron,UL listed,CPRI Tested at 25 KA fault current for one second and is provided with universal clamp made of SS earth enhancing compound shall be of 50kg/pit(resistivity is less than 0.12 Ohm meter) tested as per IEC 62561-7.The above arrangements shall be provided with heavy duty earth poly plastic pit cover of 6000 kg load bearing capacity (Size:270 x 240 x 200mm) andFRLS insulated copper conductor of size 6 sqmm, single core cable drawn through and including light grade GI pipe of size 15 mm upto 7 mtr incl cutting and chases on wall and floor and making good using PCC complete all as specified and directed. |
