}

Supply, Installation, Testing And Commissioning Of Street Light Including All Necessary Equipment’S From (1) Ekta Mall To Bhumaliya ,(2) Ekta Dwar To Garudeshwar Bypass Cross Road & (3) Gora To Ekta Nursery & Modification In Old Section Pillar Under, Narmada-Gujarat

Statue of Unity area Development and Tourism Governance Authority-agecode007 has published Supply, Installation, Testing And Commissioning Of Street Light Including All Necessary Equipment’S From (1) Ekta Mall To Bhumaliya ,(2) Ekta Dwar To Garudeshwar Bypass Cross Road & (3) Gora To Ekta Nursery & Modification In Old Section Pillar Under. Submission Date for this Tender is 19-08-2023. Electrification Work Tenders in Narmada Gujarat. Bidders can get complete Tender details and download the document.




Tender Notice

38892316
Corrigendum : Supply, Installation, Testing And Commissioning Of Street Light Including All Necessary Equipment’S From (1) Ekta Mall To Bhumaliya ,(2) Ekta Dwar To Garudeshwar Bypass Cross Road & (3) Gora To Ekta Nursery & Modification In Old Section Pillar Under
Open Tender
Indian
Gujarat
Narmada
19-08-2023

Tender Details

Supply, Installation, Testing And Commissioning Of Street Light Including All Necessary Equipment’S From ( 1 ) Ekta Mall To Bhumaliya , ( 2 ) Ekta Dwar To Garudeshwar Bypass Cross Road & ( 3 ) Gora To Ekta Nursery & Modification In Old Section Pillar Under The Jurisdiction Of Souadtga, Ekta Nagar , Narmada , Gujarat.- ( A ) Street Light Pole Steel Tubular ( Swaged ) 12 Mtr: ( B ) Foundation For 12 Mtr Pole ( C ) Octagonal Pole 7 Mtr: ( A ) Pole Arm Bracket For 12 Mtr Pole ( B ) Pole Arm Bracket For 7 Mtr Pole ( A ) Pole Box For Steel Tubular Pole: ( B ) Junction Box For Wall Mount: Hgs Pipe For Steel Tubular Pole ( A ) Led Street Light Fixture For 12 Mtr Pole ( B ) Led Street Light Fixture For 7 Mtr Pole C ) Led Flood Light Fixuture For Bridge Section Pillar ( A ) Earthing For Pole ( B ) Earthing For Main Panel: C ) Earthing Strip A ) Dwc Pipe :Providing & Laying Approved Make Double Walled Corrugated Pipes ( Dwc ) Of Polyethylene ( Conforming To Is 14930 Ii With Necessary Connecting Accessories Of Same Material At Required Depth In Existing Trench For Laying Of Cable. Below Ground / Road Surface For Enclosing Cable Having 50 Mm Outer Dia B ) Trench : Making Trench In Soft Soil Of Suitable Width Of 90 Cm Deep Or As Per Requirement Of Engineer In Charge For Laying Cable Or Locating The Fault All Over The Run And Back Filling The Same And Making The Surface As Normal Ground. C ) Drilling The Road : Drilling The Road Without Breaking The Road Surface ( Asphalt ) For Laying Of Cable For Feeding Power Supply By Making Up To Up To 100 Mm Bore Dia Size Of Holes At Both Ends Complete. D ) Covering: Covering Of Cable With Second Class Bricks Or Cement Tiles Laid Cover The Cable Crosswise & Also On Both Sides With Covering Of 7. 5 Cm. Layer Of Sand Above & Below Cable ( 16 Bricks Per Meter ) E ) Gi Pipe For Road Crossing :Supplying Following Size Of Light Duty “A” Class G.I . Pipe & Erecting As Directed By Engineer-Incharge. A ) Pvc Copper Cable For Internal Pole Wiring : Supplying And Erecting Flexible Pvc Insulated Multi Strand Multi Core 1.1 Kv Grade Isi Marked Copper Wires Of 1.50 Sq.Mm 3 Core Round Pvc Sheathed Size To Be Erected As Directed. ( Make - Havells / Polycab / Rrkable / Finolex / Anchor ) B ) Aluminium Cable : Providing And Erecting Xlpe ( Is:7098 ) ( I ) -88 Isi Armoured Cable Multistrand Aluminium Conductor For 1.1 Kv. To Be Laid On Wall With Necessary Clamps Or In Existing Trench / Pipe Of Following Size Of Cables ( Make - Havells / Polycab / Rrkable / Finolex / Anchor ) ( 1 ) 3 Core 2.5 Sq. Mm ( 2 ) 4 Core 10 Sqmm ( 3 ) 4 Core 16 Sqmm ( 4 ) 3.5 Core 35 Sq. Mm Cable Gland : Providing And, Fixing Heavy Duty Flange Type Brass Double Compression Type Cable Gland With Rubber Ring For Pvc Insulated Armoured Cable Complete Without Going Tails, Insulating Tape Etc For Following Size Of Cables. ( 1 ) 3 Core 2.5 Sq. Mm ( 2 ) 4 Core 10 Sqmm ( 3 ) 4 Core 16 Sqmm ( 4 ) 3.5 Core 35 Sq. Mm A ) Copper Lugs :Solder Less Crimping Type Copper Lugs Conforming To Is Suitable For Cable Of 1.5 / 2.5 Sq. Mm Size Evenly Crimped With High Pressure Tool & Connected To Switchgear Terminals With Brass / Cadmium Plated Nut Bolts In An Approved Manner. B ) Aluminium Lugs :Solder Less Crimping Type Aluminium Lugs Conforming To Is Suitable For Cable Of Following Size Evenly Crimped With High Pressure Tool & Connected To Switchgear Terminals With Brass / Cadmium Plated Nut Bolts In An Approved Manner. ( 1 ) 1.5 / 2.5 Sq. Mm ( 3 ) 10 Sq. Mm ( 3 ) 16 Sq. Mm ( 4 ) 35 Sq. Mm Sp Mcb :Providing And Erecting Miniature Circuit Breaker Single Pole 0.5A To 2A Suitable To Operate On 240 V A.C. System And Having Breaking Capacity 10 Ka To Be Erected In Existing Box. Confirming To Is 8828 / 1996 With Isi Mark ( Make- C&S / Havells / Indoasian / L&T / Siemens / Schneider ) ( A ) Mccb : Providing And Erecting Approved Make Microprocessor Type Of Mccb Four Pole Moulded Case Circuit Breaker Having Breaking Capacity Icu Of 25 Ka. At 415 V, Having Normal Current Rating Up To 25 A To 100A. With Fixed Thermal & Magnetic Release Suitable To Work On A.C. Supply 50 C / S. With All Internal Connections, Spreader Tinned Copper & Complete Erected In With 16. G.M.S. Housing. ( Make- C&S / Havells / Indoasian / L&T / Siemens / Schneider ) ( B ) Enclosure For Mccb : Supplying & Erecting Ip 55 Grade Following Size Section Pillar Fabricated From Joint Less M.S. Sheet With Angle Iron Legs Made From Jointless M.S. Angle With Cable Clamps To Be Buried In Ground To Have Appropriate Erection To Work Uniform Until Erected With Cement Concrete Foundation And 45 Cm High Bricks Work Finishing With Plaster Etc. Hinged Double Door Internally Supported On Both Side, With Internal And Outside Looking Arrangement With Look And Keys In Duplicate 35 X 35 X 5 Mm M.S. Angle Of Two Nos. One Is Welded And Other With Nut And Bolt For Erecting Bakelite Sheet. Painting The Section Pillar Inside And Out Side With Three Tank Powder Coated Paint. Section Pillar Roof Should Be Without Joint With Water Leakage Proof & Tested As Per Ip 55 Test & Followed By Is 2147 Of 1962 60 X 30 X 45 Cm Section Pillar Fabricated From 16 Gauge Ms Sheet With Angle Iron Legs 45 Cm Long Made From 35 X 35 X 5 Mm Thick Ms Angle. ( C ) Led Lamp For Main Panel :Supplying And Erecting Approved Make Suitable Panel Indicator Led Type Lamp, Lens Cover, Complete Erected With Necessary Connections. ( D ) Wires For Main Panel Internal Wiring : Providing And Erecting Mains With Isi Marked, 1.5Kv Grade Electrolyte Multi Stranded, Annealed Copper Conductor With Heat Resistant Pvc Insulated Conforms To Is 694, Iec - 227 Erected In Existing Pipe Of One Wire 1.00 Sq. Mm Size ( Specifically For Control Panel, Relays, Power Switchgears, Motor Starters & Control Wiring ) With Required Size Of Copper Lugs, Nuts And Bolts If Required. ( E ) Sp Mcb For Panel: Providing And Erecting Miniature Circuit Breaker Single Pole 6A To 25A Suitable To Operate On 240 V A.C. System And Having Breaking Capacity 10 Ka To Be Erected In Existing Box. Confirming To Is 8828 / 1996 With Isi Mark ( Make- C&S / Havells / Indoasian / L&T / Siemens / Schneider )

Corrigendum Details

Sr No CorrigendumDate Corrignedum CorrigendumType NewSubmissionDate
1 17-Aug-2023 19-08-2023

Key Value

Document Fees
INR 4248 /-
EMD
INR 706615.0 /-
Tender Value
INR 2.35 Crore /-
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail