|
| 1 | M & L for sub main wiring with two runs of single core 2.5 sqmmPVC insulated , unsheathed multistranded copper conductor 1100 volts FRLSH cable , including one run of 2.5 sqmm single core PVC insulated unsheathed multistranded copper conductor 1100 volts FRLSH cable as earth continuity drawn through and including one run of PVC conduit heavy duty and connected accessories etc and connecting to common earth dolly complete all as specified and as directed.NOTE:- Two runs of main cable,one run of earth continuity conductor cable and one run of PVC conduit will be measured as one unit for payment purpose. |
| 2 | S&F in repairs integral compact wide beam high performance120 W LED High bay LED flood light luminaire next generation ,energy saving environment friendly & robust highbay LED with PDC housing suitable for ceiling suspended type mounting with system efficacy of 150 lm/W including connecting up with 2.5 Sqmm multistranded copper conductor cables of suitable length withfixed to pole/wall, etc and testing complete all as specified and as directed.Make : Havells Cat No- SAUCERGENXPROHBP120WLED757P90DBOTG/ Jaquar/ Phillips/Century./CG |
| 3 | Supply only LED 6W aviation obstruction light, yelow painted, die-cast aluminium alloy housing,heat resistant, clear thick glass and accessories with neon lamp complete all as specified and as directed. Make : Cat No. HAVL01S230 of make Halonix /Sudhir/Crompton. |
| 4 | S&F for cable XLPE insulated screened PVC bedded galvanised steel strip or wire armoured electric power cable (heavy duty) 1100 volts grade with stranded aluminium conductor of size 185 sqmm 3.5 core complete all as specified and directed. |
| 5 | Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m deep for foundation/cable trench, not exceeding 10Sqm on plan and getting out in soft/loose soil complete all as specified and as directed. |
| 6 | Returning filling including spreading, levelling and well ramming in layers not exceeding 25cm thick in soil complete all as specified and as directed. |
| 7 | Removal of surplus soil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above starting point complete all as specified and as directed. |
| 8 | M&L for sand cushioning with dry clean sand 15cm below cable and 8cm above the cable complete all as specified and as directed. Note : Punned thickness shall be measured for payments. |
| 9 | Supplying and laying un-reinforced precast concrete cable cover, class LV, type 1 with peak, size 250mm x 150mm x 40mm complete all as specified and directed. |
| 10 | Boring under road without disturbing the top surface of the road and taxiway for passing throught the cable all as directed.(Note-Necessary infrastructure required for boring shall be arranged by the contractor at his own cost) |
| 11 | S&F in repairs 100 mm bore, steel tubes, galvanised, light grade with all fittings and fixtures complete fixed to walls, ceilings, poleusing suitable clamp/holder bat complete all as specified and as directed. |
| 12 | Supply installation, commissioning and testing including providing all necessary electrical connection, LT Junction box, outdoor type CPRI approvedfactory made out of3.15 mm thick MS sheet of size 0.60mx 0.60 mx 0.60 m deep having hinge opening arrangement in front and back side and bottom frame made out of angle iron of size 50x50x6mm thick and 04 Nos legs 0.5 meter length with cable entry and exit circular hole with cable gland & gasket at bottom including painting to all internal and external exposed steel surfaces with powder coating paint (5 stage process) with duly fixed in ground with necessary PCC foundation (1:2:4) type B1, with danger notice plate, street light panel of 1.6mm thick mild steel sheet, vitereous enamelled (white), with letters, figures and conventional skull and bones in signal red colour, fixing lugs, bolts, screws etc complete all as directed by the Engr-in-Charge and comprising of the following accessoriescomplete including following accessories including taking down old unserviceable box:-(a) Copper bus bar suitable for 400 Amp fixing on suitable capacity and size insulators ---04 nos |
| 13 | M&L Off load change over switch 100 A with enclosure rated voltage 415V-AC 50 Hz,type FP fixed on wall with nut and bolt including taking down complete all as specified and directed.Make-Indo asian |
| 14 | M&L earthing complete with galvanised steel earth plate electrode 600x600x6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to 4.00 GI wire by means of bolts and nuts checknuts and washers of galvanised iron or steel all as specified and shown in elecrical plate no 3 of SSR part 1 including necessary excavation and earth work in any type of soil PCC 1:3:6 type C1 chamber with RCC 1:2:4 type B1 40 mm thick cover with MS rod 80 mm dia 150 mm long reinforcement,watering funnel,40 mm dia light grade for protection of earth electrode 20 mm dia for watering all as specified and directed and tested on completion. |
| 15 | Supply , Installatin, testing and commissioing of FAA Approved Rotating Aerodrome Beacon Light with visibility 30 miles & meeting latest ICAO and CAR requirements. Beacon light shall be made of light weight aluminium enclosure fitted with heavy duty gear motor and two sealed beam 1000W lamps and standard tell-tale-circuit suitable for operation on 220 V/ 240 V , 50 Hz single phase AC power supply similar to model AB - 1000 F-220V-50 Hz RPM : 12 , dimesions : 33\" high 25 \" dia , Actual weight 70 lbs , lamps : four sealed beam 1000 W PAR 64 , Beam width : 5 wide X 32 high, rated lamp life 4000 hours, power requirement : 117 V AC, 60 Hz 2250 W, 19.2 Amps all as specified and directed. Make : Sistematik or Honey well or Luxsolar. |
| 16 | Supply fix, connect and test insulated armoured, PVC sheathed heavy duty electric cable with copper conductor 1100 volt grade laid in trenches pasing through pipes / ducts including testing complete of cross section area 2.5 Sqmm 6 core with suitable size of cable gland and cable lugs complete all as specified and directed. |
| 17 | Material and labour for Double Walled Corrugated DWC HDPE pipe of outerdia 20 mm and innter dia 16 mm including 90 degree bends with coupler and rubbe ring laid in trenches of size 20 mm suitable for cable |
| 18 | Material and labour for earthing complete with copper earth plate electrode size 600 X 600 x 3.15 mm thick buried directly in ground veritcally in a pit of depth not less than 2.25 mtr below ground leveols with top edge of the earth plate not less than 1.5 mtr below normal ground level surrounded from all sides by mixture of charcoal and common salt and electrode connected to nuts and washers of galvanized including GI protection pipe light grade 15 mm dia connected to main earth wire on plle or control board and GI pipe light grade 20 mm dia bore for wwatering funnel with wire mesh. CI cover with frame, PCC chamber pit with PCC : 1:3:6 type C-2 excavationand earth work all as shown in elecgtrical plate No . 5 connected to earthing test point all as specified or indicated including testing on completion |
| 19 | S& F SITC OF MS angle stand 75 mm X 50 mm X 6 mm suitable for Beacon light complete all as specified and directed. |
| 20 | M&L for Earthing complete with GI earth plate electrode of size 600x600x6 mm thick buried directly in ground with earth pit not less than 2.25 meter deep below ground level with top edge of plate not less than 1.5 meter below normal ground level connected to GI earth strip of size 32 x 6 mm earth lead by means of nuts, bolts, check nuts, washers of galvanised iron as steel,protected by galvanized iron pipe 40mm bore (Medium grade) allas directed including cement concrete (1:3:6) type C-1 earth pit with precast RCC (1:1.5:3) type A-1 cover slab of size 42 x 42 x10cm thick reinforced with 8mm dia TMT bars @ 15 cm c/c both ways with 10mm dia mild steel round bar of 30 cm long, bent to shape as lifting handle, funnel,wire mesh, 20 mm bore galvanized iron pipe (medium grade) for watering, charcoal or coke and salt in alternate layers with necessary earth work in soft/loose soil complete all as shown in electrical plate No 3 of SSR Part I including testing on completion all complete as specified and directed after taking down old earthing.( GI strip upto 7.5m including testing consider in this item). |
| 21 | Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 95 sq mm 3.5 core complete all as specified and directed. |
| 22 | Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 70 sq mm 3.5 core complete all as specified and directed. |
| 23 | Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 50 sq mm 3.5 core complete all as specified and directed. |
| 24 | S&F Sub-Class B brick, well burnt, laid breadth-wise along the axis of Cable laid in Trenches over Sand Cushion laid for UG Cable Protection, complete all as specified and as directed. |
| 25 | Supply, installation, testing and commissioning of Indoor Transformer Panel (with certification by CPRI / ERDA for IP 54 or higher) for R&O of suitable size, factory made (tested as per IS) totally enclosed, dust and vermin proof, double leaf shutter in front and single leaf shutter in rear, made out of 2.00mm thick CRCA sheet duly fabricated and having proper front and rear locking arrangement duly powder coated and Copper bus bar of 300 Amps PVC insulated in step way for 3 phase 4 strip system fixed on hygroscopic base insulator including INCOMER: MCCB 250 Amps, 50 kA, 4 Pole - 1 no. withmultifunction Meter, LED Indications R/Y/B and OUTGOINGS: 100A MCCB, 36kA, 4P - 2 Nos.duly prewired with appropriate size of Copper bus bar thimbled(for accomodating outgoing cable connections) suitable size busbar chamber in order to accomodate all accessories with proper insulation with inlet and outlet cable provisions incorporated. |
| 26 | Supply, installation, testing and commissioning of Indoor DG/Tx Main panel (with certification by CPRI / ERDA for IP 54 or higher) for RNO of suitable size, factory made (tested as per IS) totally enclosed, dust and vermin proof, double leaf shutter in front and single leaf shutter in rear, made out of 2.00mm thick CRCA sheet duly fabricated and having proper front and rear locking arrangement duly powder coated and Copper bus bar of 250 Amps PVC insulated in step way for 3 phase 4 strip system fixed on hygroscopic base insulator including INCOMER:MCCB 125 Amps, 50 kA, 4 Pole in One (01) No, multifunction meter, LED Indication Lamps R/Y/B, 1 no. 200A COS,OUTGOINGS:(i) 63A MCCB, 36kA, 4P - 3 Nos. (ii) 40A TPN MCB - 1 No. as Outgoing feeder duly prewired with appropriate size of Copper bus bar thimbled(for accomodating outgoing cable connections) suitable size busbar chamber in order to accomodate all accessories with proper insulation with inlet and outlet cable provisions incorporated. |
| 27 | M & L for PCC 1:3:6 type C2 (40 mm graded stone aggregate) as in foundaation filling and mass concrete complete all as specified and directed. |
| 28 | M & L for PCC 1:2:4 type B-1 (20 mm graded stone aggregate) as in coping of pole ,bed plate etc complete all as specified and directed |
| 29 | M&L for cutting the road /hard standing and making good disturbed surface by using PCC type C2 (1:3:6) by using 20 mm graded stone aggregate for the fixing the pipe complete all as directed by Engrr-In-Charge. |
| 30 | S&F in repairs 25 mm bore, steel tubes, galvanised, light grade with all fittings and fixtures complete fixed to walls, ceilings, poleusing suitable clamp/holder bat complete all as specified and as directed. |
| 31 | S&F in repairs 50 mm bore, steel tubes, galvanised, light grade with all fittings and fixtures complete fixed to walls, ceilings, poleusing suitable clamp/holder bat complete all as specified and as directed. |
| 32 | M & L for Sub main wiring with two runs of 6 sqmm (Nominal area) single core FRLSH cablePVC insulated, multistranded, unsheathed, copper conductor cables 1100 Volts grade drawn through PVC conduits/casing-caping of suitable size,fixed to wall/ceiling etc including6 sqmm (nominal area) single core, FRLSH PVC insulated, multistranded, unsheathed, FRLSH copper conductoras earth wire and duly connected to common earth point including PVC conduits/casing-caping of suitable size complete all as specified and as directed by Engineer-in-charge. (Note : PVC Conduits/Casing-caping, two run wiring cables and one run of earth wire will be measured as one length.) |
| 33 | S&F sheet metal enclouser TPN DB having facility to fix MCCB in incomer and MCBs in outgoing, TPN 4 ways, IP 43 with metal doubledoor type complete fitted with bus bars, neutral links, blanking plates including making good disturbed surfaces complete all as specified and directed. Make- Legrand or equivallent of ABB/Siemens |
| 34 | M & L for MCCB of 4 pole type, 160 Amps current capacity, thermal magnetic type, 25 KA breaking capacity, 415 Volts complete including taking down old existing unserviceable all as directed by Engr-in-charge.(Make- Legrandor equilavent of ABB/siemens) |
