Name of Work: ????? ?????? ??? ??? ????? (????) ??? ????????? ??? ?? ??????? ?????
Sl. No.
Item Description
1
Earth work in Excavation in foundation in ordinary soil (loam clay, or sand) including lift upto 1.5 metre and lead upto 30 m & including filling, watering and ramming of excavated earth into the trenches or into the space bwtween the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the Engineer in charge of 30 m from the foundation trenches.si 251 ch-4 page 27
2
Concrete with 4 cm (1½\") gauge stoneballast and fine sand of 1.25 fineness modulous and cement in proportion and cement in proportion of 8:4:1 in foundation and under floors, including suply of all material, labour & T&P etc. required for proper completion of the work. Sl 281 ch-5 page 28
3
R.C.C. work with cement approved coarse sand and 2 cm gauge approved stone ballast in the proportion of 1:1.5:3 in (rcc column) excluding supply of reinforcement and its binding but including its fixing and binding the same with 24 B,W.G.G.I. binding wire and including necessary crentering & shuttering etc. and also including supply of all material labour and T&P etc. required for proper completion of the work. binding wire cost being included in the item. Sl 283 N.S.ch-5 page 28
4
Mild steel or Iron in plain work such as reinforced concrete or reinforced brick work (when not wroughtto included in an over all rates) wrought to required shape as necessary including bending for proper completion of work andincluding supply of steel its wastage bends, hooks and authorised over lapping shall be measured upto floor two level (S.I.No. 504) .ch-10 page 29
5
M-150 class brick work in 1:6 cement & coarse sand mortar in foundation up to plinth as per SI. No. 305NS
6
12 mm thick plaster 1:6 cement and corase sand mortar including supply of all material labour T&P etc.as perch-13 ,13.1
7
One priming coat andonecoat oil distemper on new work including supply of all materials ,labour and T&P etc. requred for proper completion of the work.(649+650)ch-15 page 58
8
Iron work for gatesi 10.25.2 page 44
9
Painting or Varnishing on Iron works in small areas or new wood work with one coat readymixed priming paint & two coat of approved superior quality ready mixed paint of clear synthetic varnish including supply of all materila, labour andT&P etccomplete required for proper completion of the work. Paint to be used should conform to the ISI No 103 - 1950(SI-641+642)
10
Supply and wiring of submains with 2 nos.2.5 sqmm & with 1 no earth of 1.5 sq mm FRLSH PVC insulted 1100 V grade single core multistrand copper conductore cable in existing PVC conduit complete , inculding supply of all matrerial, labour and T&P etc. required for proper completion of the work as directwd by Engineer in charge.Same as in item no. 291 but with2 nos. 10 sq. mmFRLSH PVC insulatedcopper conductor cable.S.I. No. 291A
11
Providing and fixingStreet light
12
Retro Reflective Signs( Stainless Steel Frame and one side sings)Supply and fixing of reflective sign board ( single side) of size1.50x1.20 mretro relfctive Sheeting of HIP grad type -IV board shall be fixed on 50 mm SS 304 grade pipe and reflective sheet on 4cm thick ACP Sheet of standard make as per MORTH specification The Boaed Shall Be Fixed using 2 man post 45x45x60 cm cement concrete fondation . The Stainess steel joint welding building so an to give uniform shining at welded joints. The Retro Reflective Sheeting type -IV shall Be tested for 3year outdoor weathenng tst in Indian conditions as per IRC. 67:2012 & proof of same in form of goverment report shall be uploaded while quoting Tender .
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
