|
| 1 | Earth work in Excavation in foundation in ordinary soil (loam clay, or sand) including lift upto 1.5 metre and lead upto 30 m & including filling, watering and ramming of excavated earth into the trenches or into the space bwtween the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the Engineer in charge of 30 m from the foundation trenches.si 251 ch-4 page 27 |
| 2 | Concrete with 4 cm (1½\") gauge stoneballast and fine sand of 1.25 fineness modulous and cement in proportion and cement in proportion of 8:4:1 in foundation and under floors, including suply of all material, labour & T&P etc. required for proper completion of the work. Sl 281 ch-5 page 28 |
| 3 | R.C.C. work with cement approved coarse sand and 2 cm gauge approved stone ballast in the proportion of 1:1.5:3 in (rcc column) excluding supply of reinforcement and its binding but including its fixing and binding the same with 24 B,W.G.G.I. binding wire and including necessary crentering & shuttering etc. and also including supply of all material labour and T&P etc. required for proper completion of the work. binding wire cost being included in the item. Sl 283 N.S.ch-5 page 28 |
| 4 | Mild steel or Iron in plain work such as reinforced concrete or reinforced brick work (when not wroughtto included in an over all rates) wrought to required shape as necessary including bending for proper completion of work andincluding supply of steel its wastage bends, hooks and authorised over lapping shall be measured upto floor two level (S.I.No. 504) .ch-10 page 29 |
| 5 | Brick works in sub structure First class brick work in 1:6 cement and Coarse sandmortar in foundation plinth including supply of all materials, labour and T&P etc. required for proper completion of work. 302 |
| 6 | 12mm. Cement plaster in single coat in 1:6 cement and fine sand on single or half brick wall for interior plastering includinjg arises, interior rounded angles chamfers and of rounded angles not exceeding 80 mm. in girth and finished even and smooth. As per SI No. 13.4 ch-13 page 48. |
| 7 | Earthfilling in plinth excluding supply of necessary quantity or sand from a distance not exceeding 8 Km. (5 miles) from the site of work and including watering dressing etc. rate to include cost of all material, labour and T&P etc. required for proper completion of the work. (Excluding material Labour rate only) from 5 km |
| 8 | Sand filling in plinth excluding supply of necessary quantity or sand from a distance not exceeding 8 Km. (5 miles) from the site of work and including watering dressing etc. rate to include cost of all material, labour and T&P etc. required for proper completion of the work. (Sl 255) |
| 9 | Cement concrete with 4 cm gauge approved stone ballast approved coarse sand cement in the proportion of 4:2:1 including supply of all material T&P etc. required for proper completion of work.SI.NO.277 |
| 10 | P/L Kota stoneflooring over 20mm (av.) thick base of cement mortor 1:4 (1 cement : 4 coarse sand) laid and jointed with white cement (with pigment) slurry including rubbing and polishing complete.SI.No.14.4(a) |
| 11 | Steel work in built up tubler (round squir or rectangular hollow tubes etc) truse etc .Including cutting cutting hoisting fixing in position and applying a priming coat of approod steelprimer ,including welding and bolted with special shaped washers etc. supply of steel ,bolts nuts etc.l complete.(Hot finished welded type tubes). S.I. 10.16.1 ch-10 page 40 |
| 12 | Supply and fixingGalved corugated iron roofing 24 B.W.G. in position including supply of materials labour and Tools and Plants etcrequired for proper completion of the work and including wastage .SI.No536 ch- 10 page 46 |
| 13 | Painting or Varnishing on Iron works in small areas or new wood work with one coat readymixed priming paint & two coat of approved superior quality ready mixed paint of clear synthetic varnish including supply of all materila, labour andT&P etccomplete required for proper completion of the work. Paint to be used should conform to the ISI No 103 - 1950(SI-641+642) |
| 14 | Retro Reflective Signs ( Stainless Steel Frame and one side sings)Supply and fixing of reflective sign board ( single side) of size1.50x1.20 mretro relfctive Sheeting of HIP grad type -IV board shall be fixed on 50 mm SS 304 grade pipe and reflective sheet on 4cm thick ACP Sheet of standard make as per MORTH specification The Boaed Shall Be Fixed using 2 man post 45x45x60 cm cement concrete fondation . The Stainess steel joint welding building so an to give uniform shining at welded joints. The Retro Reflective Sheeting type -IV shall Be tested for 3year outdoor weathenng tst in Indian conditions as per IRC. 67:2012 & proof of same in form of goverment report shall be uploaded while quoting Tender . |
