Tender For Construction Of Primary Health Sub Center Main Building And Ancillary Works At Nadarpur, Tq. Kannad.
Tender Value
45.06 Lakhs
Estimated cost
Bid Submission
14 Aug 2023
0 days left
EMD
45065
Bank guarantee accepted
Document Fee
2360
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
kannad → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Primary Health Sub Center Main Building And Ancillary Works At Nadarpur, Tq. Kannad.
BOQ
| Sl. No. | Item Description |
| 1 | PART [ A ] : - WORK PORTIONExcavation for FOUNDATION in EARTH, SOIL OF ALL TYPES, SAND, GRAVEL and SOFT MURUM, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means. |
| 2 | Excavation for FOUNDATION in EARTH, SOIL OF ALL TYPES, SAND, GRAVEL and SOFT MURUM, including removing the excavated material upto a distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift from 1.5 m. to 3.0 m.) By Mechanical Means. |
| 3 | Providing SOLING using 80 mm. size trap metal in 15 cm. layer including filling voids with Crushed sand / grit, ramming, watering etc. complete. |
| 4 | Providing and laying Cast in situ / Ready Mix cement concrete in M-10 of trap / granite / quartzite / gneiss metal for FOUNDATION and BEDDING including bailing out water, Steel centering, formwork, laying / pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) |
| 5 | Filling IN PLINTH and FLOORS with CONTRACTOR\"s MATERIAL / brought from outside and approved by Engineer incharge in layers of 15 cm to 20 cm including watering and compaction etc. complete. |
| 6 | Providing and laying in situ / Ready Mix cement concrete M-20 of trap / granite / quartzite / gneiss metal for R.C.C. work in FOUNDATIONS like RAFT, STRIP FOUNDATIONS, GRILLAGE and FOOTINGS of R.C.C. COLUMNS and STEEL STANCHIONS etc. including bailing out water, Steel centering formwork, laying/pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) |
| 7 | Providing and laying Cast in situ / Ready Mix cement concrete M-20 of trap / granite / quartzite / gneiss metal for R.C.C. COLUMNS as per detailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete.(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) |
| 8 | Providing and laying Cast in situ / Ready Mix cement concrete M-20 of trap / granite / quartzite / gneiss metal for R.C.C. BEAMS and LINTELS as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) |
| 9 | Providing and laying Cast in situ / Ready Mix cement concrete M-20 of trap / granite / quartzite / gneiss metal for R.C.C. SLABS and LANDINGS as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) |
| 10 | Providing and laying Cast in situ / Ready Mix cement concrete in M-20 of trap / granite / quartzite / gneiss metal for R.C.C. PARDI of required thickness including steel centering, formwork, cover blocks, laying/pumping, compacting , curing , finishing and rougheningthem if special finish is to be provided and curing complete.(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) |
| 11 | Providing and laying Cast in situ / Ready Mix cement concrete in M-20 of trap / quartzite / granite / gneiss metal for R.C.C. WAIST SLAB, and STEPS of STAIRCASES as per detailed design and drawings or as directed including steel centering, formwork, steel props, laying/pumping, compaction, finishing uneven and honeycombed surface with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing etc. complete. (Excluding einforcement, including cover block).(Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc.) with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) |
| 12 | Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. |
| 13 | Providing second class BURNT BRICK MASONRY with conventional/ I.S. type bricks in cement mortar 1:6 in FOUNDATIONS and PLINTH of inner walls / in plinth external walls including bailing out water manually , striking joints on unexposed faces, raking out joints on exposed faces and watering etc. Complete. |
| 14 | Providing and casting in situ / ready mix PCC M-15 grade of trap metal for COPING to HEAD WALLS / PARAPET including centering, form work, compaction and curing etc. complete. (with reversible drum type mixer / concrete batch mix plant (pan mixer) with SCADA with fine agreegates of required specifications (Natural sand / VSI sand finely washed etc.) |
| 15 | Providing second class BURNT BRICK MASONRY with conventional/ I.S. type bricks in cement mortar 1:6 in SUPERSTRUCTURE including striking joints, raking out joints, watering and scaffolding etc. Complete. |
| 16 | Providing second class BURNT BRICK MASONRY with conventional/ I.S. type bricks in cement mortar 1:4 in HALF BRICK THICK WALL including mild steel longitudinal reinforcement of 2 bars of 6 mm diameter / 2 hoop iron strips 25 mm X 1.6 mm placed at every third course, properly bent and bonded at ends scaffolding, racking out joints and watering etc. complete. |
| 17 | Providing and laying TELEPHONE BLACK / AMBA WHITE / CADBURY BROWN / RUBY RED / OCEAN BROWN GRANITE STONE of 18 to 20 mm. thick for DOOR FRAME / DADO / WINDOW BOXING etc. On C.M. 1:6 including filling joints with polymer base filler nosing/moulding the sharp edges wherever necessary, curing, etc. complete. |
| 18 | Providing and fixing SOLID CORE FLUSH DOOR SHUTTER in DOUBLE LEAF 32 mm thick decorative type of exterior grade as per detailed drawings approved face veneers 3 mm thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides, and finishing with French Polish etc. complete. |
| 19 | Providing and fixing SOLID CORE FLUSH DOOR SHUTTER in SINGLE LEAF 32 mm. thick decorative type of exterior grade as per detailed drawings approved face veneers 3 mm thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides, and finishing with French Polish etc. complete. |
| 20 | Providing and fixing FIBER GLASS REINFORCED POLYSTER DOOR SHUTTER 30 mm thick as per IS 14856 (2000) (Reaffirmed 2006) without ventilator including chromium plated fixtures and fastening with chromium plated handles on both sides, etc. Complete. |
| 21 | Providing and fixing in position. (as per I.S.1868 / 1982) ALUMINIUM SLIDING WINDOW of TWO TRACKS with rectangular pipe having overall dimension 63.50 x 38.10 x 1.02 mm. at weight 0.547 Kilogram/One Running Metre and window frame bottom track section 61.85 x 31.75 x 1.20 mm. at weight 0.695 Kilogram/One Running Metre. Top and side track section 61.85 x 31.75 x 1.30 mm. at weight 0.659 Kilogram/One Running Metre. The shutter should be of bearing bottom 40 x 18 x 1.25 mm. at weight 0.417 Kilogram/One Running Metre. Inter locking section 40 x 18 x 1.10 mm. at weight 0.469 Kilogram/One Running Metre and handle section 40 x 18 x 1.25 mm. at weight 0.417 Kilogram/One Running Metre and top section 40 x 18 x 1.25 mm. at weight 0.417 Kilogram/Running metre. As per detailed drawings and as directed by Engineer in charge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm. thick plain glass with all required screws and nuts etc. complete. WITH POWDER COATING WITHOUT BOX. |
| 22 | Providing and fixing in position POWDER COATED ALUMINIUM LOUVERED WINDOWS / VENTILATORS of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 x 38 mm x 1.22 mm box type, 5 mm thick sheet glass louvers, of approved quality etc. complete. |
| 23 | Providing and fixing SHUTTER to WALL CUPBOARD made from 19 mm. thick TEAK PARTICAL BOARD with approved coloured laminated face 1.5 mm thick bonded with phenol formaldehyde synthetic resin B.W.P. grade including lipping beading iron oxidised fixtures and fastening and oil primer coat etc. complete. (Excluding cupboard frame). |
| 24 | Providing and fixing MILD STEEL GRILL WORK for WINDOWS, VENTILATORS, etc. 15 Kilogram/ One Square Metre as per drawing including fixtures necessary welding and painting with one coat of anticorrosive paint and two coats of oil painting complete. |
| 25 | Providing and fixing FLY PROOF MESH SHUTTER to VENTILATOR / WINDOW using CCTW members of size 45 x 22 mm for frame work and 35 x 22 mm for middle support and fixing fly proof mesh on it and covering TW battens of size 20 x 10 mm including priming and two coats of oil painting to the new wood and steel work and all labour charges including all fixture and fastenings etc. complete. |
| 26 | Providing INTERNAL CEMENT PLASTER 12 mm. thick in SINGLE COAT in cement mortar 1:4 WITHOUT NEERU FINISH to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. |
| 27 | Providing INTERNAL CEMENT PLASTER 20 mm. thick in SINGLE COATS in cement mortar 1:4 WITHOUT NEERU FINISH to concrete, brick surface, in all positions including scaffolding and curing etc.complete. |
| 28 | Providing and applying TWO COATS of WALL CARE PUTTY on plastered surface and Ceiling and Walls to prepare surface even and smooth of approved make, etc complete. |
| 29 | Providing FINE CEMENT FINISH 1.5 mm. thick over green plaster surface including scaffolding curing etc. complete. |
| 30 | Providing and applying WATER PROOFING TREATMENT using ACRYLIC POLYMER MODIFIED CEMENT BASED WATER PROOFING COATING with fibre glass mesh mixing at the rate of powder to liquid (2:1) by weight covering 9 to 10 Square Metre /Kilogram with two coat using approved chemicals for masonry and concrete surface by brush covering 7 years guarantee on Stamp Papers etc. complete. |
| 31 | Providing and laying VITRIFIED MIRROR / GLOSSY FINISH TILES decorative type having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern FOR FLOORING in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete. |
| 32 | Providing and laying MACHINE CUT MACHINE POLISHED KOTA STONE SLABS 20 to 25 mm. thick for TREADS and RISERS of STEPS and STAIRCASES, with rounded nosing for the treads on a bed of 1:4 cement mortar including cement float, filling joints with neat cement slurry, curing, polishing and cleaning etc. complete. |
| 33 | Providing and laying MATT FINISH CERAMIC TILES of having size 30 cm x 30 cm confirming to I.S.15622/2006 (group D II-A) and 7 to 8 mm thick FOR FLOORING in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with white/colour cement slurry cleaning curing etc. complete. |
| 34 | Providing and laying CERAMIC TILES of having size 30 cm. x 30 cm. and confirming to corresponding I.S. FOR DADO and SKIRTING in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. complete. |
| 35 | Providing and fixing BLACK KADAPPA STONE as SHELVES 25 mm. thick machine polished, extending the polish upto 20 cm width on lowerside, rounding corners, laying in position jointing with bedding cement mortar 1:4 proportion curing etc etc. complete. |
| 36 | Providing SILLS of POLISHED KADAPPA STONE 25 mm. to 30 mm. thick, on a bed of 1:4 cement mortar including cement float, filling joints with slurry, curing polishing and cleaning etc. complete. |
| 37 | Providing and fixing heavy duty inter locking concrete COLOURED PAVING BLOCKS of 60 mm. thickness of having a strength of 300 Kilogram/Sq.cm. of approved quality and shape on a bed of crushed sand of 25 to 30 mm thick including skirting joints and cleaning etc. complete |
| 38 | Providing and applying PRIMING COAT on CONCRETE / MASONARY / ASBESTOS CEMENT PLASTERED SURFACES including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required etc. complete. |
| 39 | Providing and applying PEARL / LUSTER FINISH PAINT of approved colour and shade to the existing plaster surface including scaffolding, preparing the surface, applying the acrylic wall putti etc. complete. |
| 40 | Providing and applying TWO COATS of EXTERIOR WEATHER SHIELD PAINT of approved manufacture and of approved colour to the plastered surfaces including cleaning, preparing the plaster surface ,applying primer coat, scaffolding if necessary and watering the surface for two days etc complete. NOTE: For Item One Number 15 to 18 prior approval of Superintending Engineer will be necessary. |
| 41 | Providing and applying TWO COATS of WATER PROOF CEMENT PAINT of approved manufacture and of approved colour to the plastered surfaces including scaffolding if necessary, cleaning and preparing the surface, watering for two days etc. complete. |
| 42 | Providing and fixing 50 mm. dia. medium class G.I. PIPE GATE with WICKET GATE of approved drawing with all fixtures and fittings in two leaves with strong hold fast embedded in c.c. block at top and bottom with locking arrangement including cutting, bending, making holes and with one coat of primer etc. complete. |
| 43 | Providing and laying IN TRENCHES 15 mm. dai. UPVC pipe including necessary excavation, fittings. Refilling trenches etc. complete Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. |
| 44 | Providing and fixing ON WALLS / CEILING / FLOOR 15 mm. dia. UPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. |
| 45 | Providing and fixing 15 mm. dia. screw down BIB / STOP TAP of BRASS including necessary socket union nut complete. |
| 46 | Providing and fixing screw down for 25 mm. dia. WHEELED STOP TAP of BRASS including necessary sockets/union nut complete. |
| 47 | Providing and fixing H.D.P. container one piece moulded water tank made out of high density polythyler and built corrugated inclusive of delivery up to destination hoisting and fixing of accessories such as inlet,outlet overflow pipe inclusive of all tanks capacity between 200 to 1000 liters. |
| 48 | Providing and fixing ORISSA TYPE WHITE GLAZED earthenware WATER CLOSET PAN of size 260 mm. x 440 mm. x 580 mm. with approved make Slim wall hung cistern with installation kit including S or P trap with cast iron soil and vent pipe upto outside face of the wall 1:2:4 brick bat lime concrete bedding without flushing tank and its accessories etc.complete. |
| 49 | Providing and fixing WHITE GLAZED with BOTTLE TRAP earthenware WASH HAND BASIN of 55 x 40 cm. size including cold water piller taps, brackets, rubber plugs and brass chain, stop tap, chromium plate bottle trap and necessary pipe connections including UPAC waste pipe and trap upto the outside face of the wall, making good the damaged surface, testing etc. complete. |
| 50 | Providing and fixing 15 cm rigid PVC NAHANI TRAP including PVC grating, bend, connecting piece of UPVC pipe up to the outside face of wall, making the good damaged surface and testing etc. complete (Prior approval of sample and brand by Ex. Engr. is necessary before use) |
| 51 | Providing and fixing STAINLESS STEEL SINK of size 600 x 510 x 200 mm. incluidng coupling, outlet pipe, elbow and other necessary fitting, finishing etc. complete. |
| 52 | Providing and fixing 15 cm. x 10 cm. salt glazed stoneware GULLY TRAP in cement concrete 1:4:8 outside the building including cast iron grating in the sink, connecting glazed stoneware pipe, brick masonry chamber with cast iron lid and cast iron grating for the gully trap. |
| 53 | Providing, laying and fixing, jointing Eco - drain 110 mm. SN 8 Nu- Drain UPVC Pipes or of equivalent make, manufacture as per EN 13476 or equivalent as per I.S.15328 with fittings such a bends, tees, coupler, etc. jointing with rubber lubricant including necessary excavation, trench refilling with selective excavated material etc. complete. |
| 54 | Providing and constructing Brick Masonry Inspection Chamber 90 cm. x 45 cm. x 90 cm. including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W.pipes, Brick Masonry, plastering from inside and with frame fixed in cement concrete with R.C.C. Cover medium duty 140Kilogramwith frame etc complete. |
| 55 | Providing SOAK PIT of size 120 cm. x 120 cm. x 120 cm. including excavating and filling with brick-bats. |
| 56 | PROVIDING, LAYING, SPREADING and COMPACTION STONE AGGREGATES of specific sizes to WATER BOUND MACADAM SPECIFICATION including spreading in uniform thickness, hand packing to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting with Vibratory roller. to the required density. BY MECHANICAL MEANS - Grading-I (Using Screening Type A (13.2) mm Aggregate) |
| 57 | PROVIDING, LAYING, SPREADING and COMPACTION STONE AGGREGATES of specific sizes to WATER BOUND MACADAM SPECIFICATION including spreading in uniform thickness, hand packing to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting with VIBRATORY ROLLER to the required density. BY MECHANICAL MEANS - Grading-II (Using Screening Type B (11.2 mm) Aggregate) |
| 58 | Providing and constructing 75 mm. thick Modified Penetration Macadam (MPM) road surface including all materials, preparing the existing road surface, spreading 40 mm. stone metal layers 30% crusher broken metal + 70% Hand broken (by breaking rubble obtained by blasting) heating and spraying the bitumen of specified grade @ 2 Kg/sqm, spreading 12 mm.size chips compacting with three wheel static roller having weight 8 to 10 MT. to achive the desired degree of compaction as per Technical Specification Clause 506 etc. complete. Including picking of existing WBM surface. (VG-30 bulk bitumen rates are considered to arrive at rates) |
| 59 | Open Graded Premix Surfacing- Providing and Laying OGC 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates premixed with bituminous binder transported to site with VTS , laid over a previously prepared surface, finished to the required grade, level, alignment, and rolling to achieve the desired compaction but excluding prime / tack and Seal coat. For Bitumen of specified grade--USING drum mix type hot mix plant with SCADA, Paver and Vibratory roller ( Over MPM Surface) (VG-30 bulk bitumen rates are considered to arrive at rates) |
| 60 | Providing and applying TACK COAT on the prepared surface heating by fames in Boiler and spraying bitumen with sprayer on Dry / Hungry B.T. surface 3 kg/10 sqm. (VG-30 bulk bitumen rates are considered to arrive at rates) |
| 61 | Providing bituminous Type-A LIQUID SEAL COAT on bituminous surface including supplying all materials and bitumen of specified grade preparing existing road surface, heating and applying bitumen @ 0.98 KgSqm. by mechanical means, spreading chips and rolling, by static roller having weight 8 to 10 MT. etc. complete. (VG-30 bulk bitumen rates are considered to arrive at rates) |
| 62 | Supplying HARD MURUM / KANKAR at the road site, including conveying and stacking complete. |
| 63 | Spreading HARD MURUM / SOFT MURUM / GRAVEL or kankar for side width complete |
| 64 | Compacting the HARD MURUM side widths including laying in layers on each side with VIBRATORY ROLLER including artificial watering etc. complete. |
| 65 | Providing and fixing board displaying information, such as \"Name of work, Tender cost, Name of Contractor, Work completion and liability period etc\", having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross braced M.S. angles of size 35mmx35mmx3mm duly painted including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling, transportation, and labour etc complete. Spec. No. As directed by Engineer in Charge |
| 66 | COST OF DISMANTLING OLD BUILDING : - Dismantling the R.C.C. Work 1:2:4 and sorting out the materials such as steel etc. as directed and stacking them within the specified lead as directed etc. complete. |
| 67 | Dismantling STONE MASONRY in LIME or CEMENT MORTAR including stacking the materils as directed with all leads, lifts etc. |
| 68 | Dismantling BRICK MASONRY in LIME or CEMENT MORTAR and stacking the materils as directed with all leads, lifts etc. |
| 69 | Removing DOORS and WINDOWS with FRAMES and stacking the materials as directed with all leads, lifts etc. complete. |
| 70 | Removing CEMENT TILES, or MARBLE or POLISHED SHAHABAD FLOOR or DADO without bed concrete including stacking the materials as directed with all leads, lifts etc. complete |
| 71 | Removing LIME OR LEAN CEMENT CONCRETE including stacking the spoils as directed with all leads, lifts etc, complete. |
| 72 | Providing SOLING using 80 mm. size trap metal in 15 cm. layer including filling voids with Crushed sand / grit, ramming, watering etc. complete. |
| 73 | PART [ A ] : - WORK PORTION |
AI Tender Summary
Tender Timeline
Jul 28, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedAug 14, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedAug 15, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender