Haryana Urban Development Authority-HUDA has published Tender For Construction Of Internal Roads Rcc Retaining Wallin Residential Sector-80, Faridabad.Construction Of Internal Road Including Earthwork, Gsb, Wmm, Prime Coat, Tack Coat, Thermoplastic Paint And Sign Board Etc. In Phase-Ii, Sector 80, Faridabad A. Submission Date for this Tender is 12-08-2023. Road Work Tenders in Faridabad Haryana. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | HSR Item No. 34.23///Providing and fixing of burji 300 dia RCC (NP3 pipe) with filling of concrete (1:2:4)at the interval of 30 m complete in all respect. |
| 2 | HSR Item No. 4.1/// Clearing jungle including uprooting of rank vegetation, grass, sqm brush wood, trees and saplings of girth up to 30 cm measured ata height of 1 m above ground level and removal of rubbish up toa distance of 50 m outside the periphery of the area cleared. |
| 3 | HSR Item No.17.6/// Construction of Embankment CBR 8% (for new road/ raising/berms/ etc.) with approved material obtained from borrow pits, including compensation of earth with all lead and lift transporting to site, spreading, grading to required slope and compacting to meetrequirement of table 300- 2, as per technical clause 305 of MORT&H specifications. |
| 4 | HSR Item No. 17.14.1/// Granular Sub-Base with Close Graded Material• (Table:- 400-1) Plant mix method Reference MORTH (Specs) 307 308 401 Construction of granular sub-base by providing Material as per Grading Ill (Table 400-1 of MORT&H 5th revision) mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per technical clause 401 of MORT&H specifications Grading I material. |
| 5 | HSR Item No. 17.24/// Wet Mix Macadam Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density as per technical clause 406 of MORT&H specifications. |
| 6 | App. Item/// Prime Coat @ 0.85kg per sqm Providing and applying primer coat with bitumen emulsion on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.85 kg/sqm using mechanical means as per technical clause 503 of MORT&H specifications |
| 7 | App. Item/// Tack Coat.Providing and applying tack coat with bitumen vg-10 using emulsion pressure distributor atthe rate of 0.30 kg per sqm on the preparedbituminous/granular surface cleaned with mechanical broom as per technical clause 503 of MORT&H specifications. |
| 8 | Appd. Item/// Providing and laying 50mm - 75 mm dense graded bituminous macadam with 100-120 TPH batch type HMP producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder VG 30 @ 4.5% by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction complete, as per technical clause No. 505 of MORT&H specifications. |
| 9 | Appd. Item/// Bituminous Concrete 30 mm to 45 mm thickness (grading II) with 100-120 TPH batch type HMP Providing and laying 30mm - 45 mm bituminous concrete with 100-120 TPH batch type hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder VG - 30 @ 5.4% per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction complete as per technical clause 507 of per MORTH specifications.. |
| 10 | HSR Item No. 6.39.1/// Providing and fixing at or near ground level precast cement concrete in kerbs, edgings etc. as per approved pattern and setting in position with cement mortar 1 :3 (1 Cement : 3 coarse sand), including the cost of required centering, shuttering complete1:1½ :3 (1 Cement: 1½ coarse sand(zone-111) : 3 cum graded stone aggregate 20 mm nominal size). |
| 11 | HSR Item No. 34.49 /// Extra for using White Cement based primer modified with high performance polymers, applied as an undercoat for exterior/interior cementitious surfaces before paint Technical Specifications: i) Degree of whiteness (in terms of reflectance) >93% ii) Fineness (Residue on 63 Micron Sieve) - Minimum 4.0 iii) Bulk Density - 0.8 to 0.9 kg/litre iv) Viscosity by Brookfield, 50rpm, Spindle no RV 05 at 25 - 300cP to 600cP v) Pot Life - Min. 1 BO minutes vi) Coverage after 1 st coat - 80-1 00 sqft/kg vii) Adhesion cross-cut on 2 coat application after 48 hours - Min. 3B. |
| 12 | HSR Item No.17.44/// All works up to Plinth Level: M-10 grade plain cement concrete (cement content considered @ 220 kg/cum) |
| 13 | HSR Item No. 17.69.2/// Providing and laying 80mm thick factory made cement concrete inter1ocking paver block of M -35 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over (BIS 15658:2006) and including 60mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge. |
| 14 | HSR Item No. 34.26/// Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface Providing and laying of hot applied thermoplastic compound 2.5 mm thick including Reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes. Note:- 1. A sealing primer may be applied in advance on cement concrete pavement to ensure proper bonding. Any laitance and/or curing compound to be removed where paint is required to be applied on concrete surface. 2.Cost of painter is already included in hire charges of road marking machine. |
| 15 | HSR Item No. 34.33/// Road Markers/Road Stud with LanseReflector Providing and fixing of road stud 100x 100 mm, die-cast in aluminium, resistant to corrosive effect of salt and grit, fitted with lense reflectors, installed in concrete or asphaltic surface by drilling hole 30 mm up to a depth of 60 mm and bedded in a suitable bituminous grout or epoxy mortar, all as per BS 8 73 part 4: 1973. |
| 16 | HSR Item No. 34.22.1 /// Providing and erecting 12 m wide overhead signs with a corrosion resistant aluminum alloy sheet reflected with high intensity retro-reflective sheeting with vertical and lateral clearance given in clause 802.2 and 802.3 and installed as per clause 802. 7 over a designed support system of galvanized steel trusses of section and type to be mounted by bolts and nuts over RCC structure as per drawing. |
| 17 | Appd. Item///Hire charges of pump set of capacity 4000 Ltr/Hrs& Gen set 63 Kva with complete in all respect watering of pit upto 10 Mtr depth and upto suitable/available lead to the entire satisfaction of engineer-in –charge. |
| 18 | HSR Item No. 4.12.1/// Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead up to 50 m and lift up to 1.5 m, as directed by Engineer-in-charge. All kinds of soil. |
| 19 | HSR Item No. 6.1.6/// All works above plinth and up to floor IV level M-15 grade plain cement concrete cum (cement content considered @ 240kg/cum). |
| 20 | HSR Item No. 6.34.6/// Steel reinforcement for R.C.C. work, where not included in the complete rate of RCC, including straightening, cutting, bending, placing in position, binding, wastage, overlaps, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire etc. complete in all respect below plinth level.Note:- Reinforcement shall be measured in length including hooks, if any, separately for different diameters as actually used in work , excluding overlaps. Wastage, overlaps, couplings, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire or other methods of binding & placing shall not be measured and cost of these items shall be deemed to be included in the rates for reinforcement. Cold twisted bars. |
| 21 | HSR Item No. 6.29.2/// Centering and shuttering including strutting, propping etc. and removal of form for Walls (any thickness) including attached pilasters,buttresses, plinth and string courses etc. |
| 22 | HSR Item No. 6.28.1/// Providing and laying in position ready mixed M-25 grade concrete for reinforced cement concrete work, using fly ash and cement content as per approved design mix, and manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work, including pumping of R.M.C. from transit mixer to site of laying, excluding the cost of centering, shuttering, finishing and reinforcement, including cost of admixtures in recommended proportions as per IS: 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer - in - charge.NOTE- (1) Cement content considered in this item is@ 330 kg/cum. Less cement used as per design mix is recoverable. However no extra payment shall be made if excess cement is used as per design mix. (2) Fly ash conforming to grade I of IS 3812 (Part-1) only be used as part replacement of OPC as per IS : 456. Uniform blending with cement to be ensured in accordance with clauses 5.2 and 5.2.1 of IS:456 -2000 in the items of BMC and RMC. All works up to Plinth level. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
