Tender For Development Of Play Field At Pahloo Kulgam.
Tender Value
49.42 Lakhs
Estimated cost
Bid Submission
10 Aug 2023
0 days left
EMD
98840
Bank guarantee accepted
Document Fee
1050
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
pahloo → Jammu And Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Development Of Play Field At Pahloo Kulgam.
BOQ
| Sl. No. | Item Description |
| 1 | Levelling and FillingFelling tress of the girth (measured at height of 1 mtr above ground level incl. cutting trunk and branches remove the roots and stacking of materials and disposal of unservieable materials. a) Beyond 30 cm girth upto and including 60 cm girth |
| 2 | b) Beyond 60 cm girth upto and including 120 cm girth |
| 3 | Surface dressing of the ground including removing vegetation and inequalities not exceeding 15cm deep and disposaal of rubbish lead upto 50 Mtrs or as directed (in all kinds of soil). |
| 4 | Supply, Spreading and levelling of good earth in layers not exceeding 30cm thick incl. ramming, dressing, watering and rolling the top layer with Power road roller/ Compactor 8-10 ton capacity incl. all leads, lifts, royalities, taxes and carriages complete incl. enagagement of skilled labour for levelling of top surface upto the desired level/ finish as directed by the Engineer Incharge. |
| 5 | Dugout:- Supply of dugout structure fabricated from MS tube having minimum dimension of 50 x 50mm Square Tube detachable framework with powder coated matt finish. The height of the dugout will be 2.05 meter at front side, Curved surface roof and 4.9 mtr length The seating capacity will be of 10 players. The structure will be covered with 3mm thick transparent or colored polycarbonate sheet on top and two sides.Wheel Assembly – Solid tyre 10” wheel attached to dugout for easy movement withoutany damage to the sports field.The Structure is Provide with HDPE Blow Molded Seat:Double-wall hollow blow mold bucket type seat having minimum dimensions as 465 mm side length x 440 mm front width x 390 mm rear height in one piece of HDPE having minimum shell thickness of 2 mm on each wall. Minimum seat density of 0.95 gram/cm3, weight of plastic chair should not be less than 1.9-2.1 kg. Chair should withstand in high temperature not less than 50°C with ultraviolet stabilizer and color fastness, having ergonomic design, the chair should be fixed with Metal Inserts moulded inside seat to connect seat with sheet metal bracket which is mounted on 40x2mmS Square tube.Chair has a warranty of 2years against significant color fading and 5 Years against breakage due to manufacturing .chair plastic part tested with xenon-Arceposure Test as per ISO 48892-2:2013. Cycle-1.TheseatpassBSEN12520: 2015 TEST |
| 6 | Cricket Competition Pitch:- Earthwork in excavation by manual means in trenches for foundation drains pipes etc not exceeding 1.5mtr in width and not exceeding 10 sqm on plan depth upto 1.5mtr including disposal of excavated soil as directed, disposal earth to be levelled and neatly dressed (in all kinds of soil).. |
| 7 | Consolidation of Pitch base to required gradient and x-section using PRR of 8-10t to achieve the required density |
| 8 | S/L of stone solling in trenches hand packed of size not more than100mm incl. consolidation with PRR 8 tonn capacity and all types of carriages involved complete. |
| 9 | S/L of coarse sand incl. sieving of sand properly to remove any foreign substance and laying in layers not exceeding 50mm in depth and surface to be flooded with water incl. carriage of sand from near source |
| 10 | S/L of sandy loom (mixture of fine sand and fine clay) in ratio 1:10 to be laid in layers not exceeding 50mm in depth and consolidation with 1/2 tonne roller or plate vibrator incl. all types of carriages of materials involved. |
| 11 | S/L of top layer of earth having highest clay content available to be laid in layers not exceeding 50mm in depth and consolidation with 1/2 tonne roller or plate vibrator incl. all types of carriages of materials involved. |
| 12 | P/fixing 15x15feetcricket canvas sight screenand is movable foldable with stable MS section framewith channel base with 4 SPecial turf tyres allowing easy movement with color black on oneside of sight screen and white color on other side |
| 13 | Supply and Fixing of Football goal post of GI pipe 100 mm dia as per the FIFA specification incl. embedding in cement concrete block in 1:2:4 mixof 2x2x3feet size incomplete incl. earthwork excavation,solling & mudmate Job. |
| 14 | Chain link FencingEarth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (Not exceeding 1.5 mtr in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, depth upto 1.5mtr. includingdisposal of excavated earth as directed and , disposed earth is to be levelled and neatly dressed in all kinds of soil complete |
| 15 | Supplying/filling dry boulder stone soling tightly hand packed under foundation and under floors including all carriages/head load upto site of work complete. |
| 16 | P/L in position cement concrete in foundation and plinth excluding the cost of centring and shuttering all work upto plinth level (1;4:8) mix crushed stone aggregate 40 mm nominal size (Including carriage ) |
| 17 | P/L in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering all work upto plinth level (1;3:6) mix crushed stone aggregate 20 mm nominal size(Including carriage ) |
| 18 | Centring and shuttering incl strutting propping etc and removal of form work for foundation footing bases of columns |
| 19 | Structural steel work welded in built up sections, trusses and framed work,including cutting, hoisting, fixing in position and applying a priming coat ofapproved steel primer all complete inc. all carriages of materials involved. |
| 20 | Providing and foding of Gl Chain Link fabric Fencing including removing of demaged/missing portion of required width in mesh size 50x50mm incl. strengthening with 2mm dia wire or nuts, bolts, washers/welding as required 2 complete in all respects as directed by Engineer incharge, also inci carriage of materials from source/store to site of work complete. |
| 21 | Painting with synthetic enamel paint of approved brandand manufacture to give an even shade two or more coatsincl a coat of steel priemer |
| 22 | GateEarth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (Not exceeding 1.5 mtr in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, depth upto 1.5mtr. including backfilling of soil &disposal of excavated earth disposed earth is to be levelled and neatly dressed in all kinds of soil complete |
| 23 | Supply and filling of stone soling hand packed including ramming with heavy rammers including all leads, lifts and carriages complete |
| 24 | P/L in position cement concrete in foundation and plinth excluding the cost of centring and shuttering all work upto plinth level (1;4:8) mix crushed stone aggregate 40 mm nominal size (Including carriage ) |
| 25 | P/L in position reinforcedcement concrete in columns pillars excluding the cost of centring and shuttering and reinforcement in (1;2:4) mix crushed stone aggregate 20 mm nominal size (Including carriage ) |
| 26 | Centring and shuttering incl strutting propping etc and removal of form work forcolumns etc. |
| 27 | Steel reinforcement for RCC work incl. straightning,cutting,hoisting,placing in position all complete(TMT Bars incl. Carriage) |
| 28 | Structural steel work welded in built up sections,and framed work,including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer etc (in gates etc) |
| 29 | Painting with synthetic enamel paint of approved brandand manufacture to give an even shade two or more coatsincl a coat of steel priemer |
| 30 | P/F of decorative stone tile work for gate pillars for wall lining backing filled with a grout of 12mm thick average in cement mortar 1:3 (1 cement: 3 coarse sand), including, pointing with white cement mortar 1:2 (1 white cement : 2 marble dust) with an admixture of pigment to match the marble shade etc complete job including all carriages and lifts. |
| 31 | Installation of MS sign board incl. lettering / painting incl. frame work and fixing charges complete job. |
| 32 | Net Practice PitchEarthwork in excavation by manual means in trenches for foundation drains pipes etc not exceeding 1.5 mtr in width and not exceeding 10sqm on plan depth upto 1.5 mtr including backfilling of soil & disposal of excavation soil to be levelled and neatly dressed in all kinds of soil |
| 33 | P/L of stone soling hand packed,incl ramming with heavy rammer incl. all carriage upto site of work |
| 34 | P/L in position cement concrete in foundation and plinth excluding the cost of centring and shuttering all work upto plinth level (1;4;8) mix stone aggregate 40 mm nominal size crushed aggregate (Including carriage ) |
| 35 | P/L in position Reinfored cement concrete of specified grade excluding the cost of shuttering and centring finishing and reinforcement all work upto plinth level 1:1.5:3 Mix( Including carriage) using crushed stone aggregate 20mm nominal size |
| 36 | Steel reinforcement for RCC work incl straightening ,cutting, hoisting ,placing, in position all complete (TMT Bars incl. Carriage |
| 37 | P/F of MS pipes 65mm dia incl. fixing and applying one coat of redoxide primer and two coats of synthetic enamel paint of approved brand and manufacturer incl. fixing of bottom MS plate 12”x12” of 6 mm thick incl. of hooks etc all necessary fixtures complete |
| 38 | Centering and shuttering incl shuttering propping etc and removal of form work for foundation footing bases of columns |
| 39 | P/F of synthetic polythene twin thickness knotted net 3 mm guage and 50x50 mm mesh |
AI Tender Summary
Tender Timeline
Jul 28, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedAug 10, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedAug 11, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender