|
| 1 | Earth work in excavation in all kinds of soil (Ordinary, hard soil & stoney earth soil ) for foundation trenches within 50m. Initial lead and 1.5m initial lift including rough dressing and beaking clods to maximum 5 cm to 7 cm and laying in layers not exceeding 0.3 m in depth and as per specification approved by the department as directed by the Engineer-in-charge. |
| 2 | Foundation |
| 3 | Extra Lift + 1.5m |
| 4 | Filling foundation trenches and plinth with excavated earth including laying the earth in layers not exceeding 23.5cm (9”) thick ramming and watering with all leads and lifts including cost of all labour, T&P etc. complete as directed by the Engineer-in-charge. |
| 5 | For 2 nos. |
| 6 | Supplying & Filling foundation trenches , plinth & ditches with river sand well watered and rammed inlayers not exceeding23 c.mindepthwith all lead and lift including cost, conveyance, loading, unloading,stacking,royaltiesof all Materials, cost of all Labour,Sundries, T&P required for the work etc. complete in all respect excluding GST as directed by the Engineer-in-charge.(Measurement will be taken on finished compacted section only.) as directed by the Engineer-in-charge. |
| 7 | For 2 nos. |
| 8 | Providing and LayingPlain Cement Concreteof proportion (1:3:6) in foundation and floors (i.e. below the base course of the flooring) using40 mm size crusher broken H.G Stone Metal free from weathered skins , cementand screened & washed sharpriver sand for mortar of approved quality & from approved quarry including hoisting, lowering and laying concrete to the required level, ramming, watering & curing etc complete to required levels, laid in layers not exceeeding 15cm thick in each layerincluding cost, conveyance , loading,unloading, stacking ,royalties of all materials, cost of all labour, Sundries, T&Prequired for the work including shoring, shuttering and dewatering ( if required) including hire and running charges of the water pumprequired for the worketc complete excluding GST in all respect as directed by the Engineer-in-charge. |
| 9 | For 2 nos. |
| 10 | R.C.C. work of Grade- M 25 in following works using 20mm size & down graded hard black crusher broken granite stone chips of approved quality from approved quarry in specified proportion including centering & shuttering,hoisting, lowering, laying and compacting concrete, watering and curing and finishing the exposed surfaces smooth with cost, conveyance, royalties of all materials with all labour and T&P required for the work etc. complete in all respect as per the direction of engineer incharege but excluding the cost and conveyance of HYSD rods or Tor steel and binding wire of 18 to 20 gauge and labour charges for straightening, cutting, bending, binding and tying the grills and placing in proper position as directed by the Engineer-in-charge. |
| 11 | (Fondation) |
| 12 | For 2 Nos.(Plinth Beam) |
| 13 | For 2 nos.(Pedistral & Column) |
| 14 | For 2 Nos (Roof Beam) |
| 15 | For 2 Nos (Lintel) |
| 16 | For 2 Nos. ( Chajja) |
| 17 | For 2 Nos.(Roof Slab) |
| 18 | Reinforcement for RCC work including straightening, cutting, bending, placing in position HYSD and binding all complete. lifting and placing in position as per design complete including cost of bars , binding wires , including cost of all materials, labour, conveyance, loading and unloading,, royalties, sundries, tools and plants, etc. complete as per the direction of the Engineer-in-charge. (linear measurement will be taken and quantity will be calculated on standard weight for all heights)-Thermo Mechanically Treated bars as directed by the Engineer-in-charge. |
| 19 | for 2 Nos. |
| 20 | Providing Brick work with Fly ash bricks 23cm x 11cm x 8cm size having crushing strength not less than 75 kg/cm2 with dimensional tolerance +/ - 2 percent in cement mortar (1:6) ( 1 cement: 6 sand), with all necessary projection, splay cutting, circular moulding, corbelling, etc., including cost of all materials, labour, conveyance, loading ,and unloadining, royalties, scaffolding, watering, curing, sundries, tools and plants, etc., as per the direction of the Engineer-in-charge. |
| 21 | For 2 Nos.( Foundation & Plinth) |
| 22 | For 2 Nos. (Superstructure) |
| 23 | Providing 16 mm. thick cement plaster in all floors at all height with cement mortar of mix (1:6) with portland slag cement (PSC) finished smooth to inside rough surface of brick masonry walls after racking out joints including watering and curing rounding of corners etc. complete with cost, coveyance, loading and unloading, royalties and ,es of all materials and cost of all labour, T&P, sundries and scaffolding required for the work etc. with providing grooves as directed by the Engineer in charge. (Inside) |
| 24 | Gard Room inside for 2 Nos. |
| 25 | providing 12 mm. thick cement plaster in all floors at all height with cement mortar of mix (1:4) with portland slag cement (PSC) finished smooth to inside rough surface of brick masonry walls after racking out joints including watering and curing rounding of corners etc. complete with cost, coveyance, loading and unloading, royalties and ,es of all materials and cost of all labour, T&P, sundries and scaffolding required for the work etc. with providing grooves as directed by the Engineer in charge. (Outside) |
| 26 | Gard Room OutSide for 2 Nos. |
| 27 | Providing 6mm thick plaster in C.M. (1:4) over ceiling, chajja, loft, staircase, column, beams and walls after removing the false if necessary and close deep chipping including rounding of the corners, recess and roughening concrete surface where necessary, watering and curing, finished smooth over R.C.C. surface, including cost, conveyance, royalty, ,es of all materials, cost of all labour, T&P etc. complete as per direction of the Engineer-in-charge |
| 28 | For 2 Nos. |
| 29 | Providing Granite stone prepolished 20mm thick of area above 0.40 Sqm in flooring of approved quality, colour and size in floors, treads on steps and landings in all floors at all height on 20mm thick bed of cement mortar of mix (1:4) laid in proper slope and gradient with screened and washed sharp sand for mortar and grouted with neat white cement slurry jointing the tile with neat white cement slurry mixed with required quantities of pigments of approved marks to match the shades of the granite tile if required watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties of all materials, cost of all labour, T&P required for the work etc. complete in all respect as per specification and direction of Engineer-in-charge. |
| 30 | For 2 Nos. |
| 31 | Providing 25mm thick grading concrete in C.C. (1:2:2) laid in proper slope over terrace roof slab by using two part of sand, one part of cement and two parts of6mm size black hard crusher broken granite chips with addition of water proofing compound of approved quality to be mixed with specified ratio including watering, curing, cost, conveyance, royalties, taxes of all materials, cost of all labour, T&P etc. complete as required for the finished item of work as directed by the Engineer-in-charge. |
| 32 | For 2 Nos. |
| 33 | Supplying, fitting and fixing of M.S grills, grill gates with top and bottom rails, steel windows, steel doors, steel frames for doors and windows, staircase and parapet railing ( as per I.S. specification and as per approved drawings ) in proper position in all floors and at all height including making holes to brick walls/ R.C.C structure/wood work etc. and making good to the damaged walls/ structures with cement concrete (1:2:4) with black hard crusher broken granite stone chips of 12mm to 20mm size ( 20mm size not to exceeds 25% ) including watering and curing etc. complete in all respect as directed by the Engineer in charge ( W.I. / M.S. windows grills, grill gates, collapsible gates with top and bottom rails, steel windows, steel doors, steel frames for doors and windows, staircase and parapet railings square bar along with required nos. of nails and screws and other required materials of approved quality and approved size shall be supplied by the contractor at his own cost. as directed by the Engineer in charge. |
| 34 | For 2 Nos. |
| 35 | Providing and fixing of Partly fixed, partly top hung and partly louvered windows of approved make to be fabricated from roll formed sections made of pre-painted steel (base steel as per IS- 513 of 0.6 mm thick “D” quality, galvanized as per IS-277 with zinc of 120 Gm/Sq.mtr) with paint specification being with primer of 5-7 microns and finished paint with polyster paint (Black /Pearl white/ Chocolate Brown) of 12-16 microns alongwith the alkyd backer at the back of 5-7 microns and the sizes of outer frame being of 46x52 mm and with all vertical and horizontal mullions are of 46x70 mm and fixed beadings are of18x25 mm. Section for internal top and bottom frames in the louvered areas should be 18 x 40 mm.Top hung shutter should be of 46 x 46 mm. Accessories / gaskets are to be used as per the manufacturer’s supply and specification like handle being made of high grade aluminium powder coated and with nylon receiver and gasket will be made of EPDM. All corner brackets are to be made of CRCA with zinc phosphating. The mullion caps and louvered-clips should be of glass filled nylon. The sections are to be cut to length ,mitre joined with corner bracket and frames are fixed to the concrete/masonry walls by means of self expanding screws and glass to be used of 5 mm reflective with all taxes complete as directed by the Engineer-in-charge. |
| 36 | For 2 Nos. |
| 37 | Finishing theplastered surfaces ofthe wallswithwhite cement wall puttyof approved make(J.K/Birla) and finishing the surface smooth by sand papering to receive paint in all floor & at all heightsincluding cost, coveyance, loading , unloading ,stacking and taxes of all Materials,cost of all Labour,Sundries, Staging,Scaffolding, T&P required for the work etc. complete in all respect as directed by the Engineer- in- charge. |
| 38 | For 2 Nos. |
| 39 | Applying 2 (Two ) coatsof PaintingwithDistemper over a coat of Cement Wall Primerusing Distemper& Cement Wall Primer of approved make and shade( NEROLAC / ASIAN / BERGER / DULUX )in allfloors and at allheights to the interior surface ofthewall to make an even finished surface including sandpapering, applying putty wherever necessary including cost,conveyance, loading, unloading,stacking, taxes of all Materials,cost of all Labour,Scaffoldings, Staging, Sundries, T&P etc.required for the work complete as directed by the Engineer -in -charge. |
| 40 | For 2 Nos. |
| 41 | Painting2 (Two) or morecoats with Weather CoatPaint of premium brand Such as NEROLAC / ASIAN / BERGER / DULUX or equivalent of approved quality & colour, using required quantities of paint as specified by the manufacturer to give an even shade over a coat ofwall priming(water bound)on the finished externalplastered surfaceat all height , watering the surface before applying theWeather CoatPaint and curing for the required periodincluding cost, coveyance, loading , unloading ,stacking andall taxes , cost of all Labour, Labour cess, Sundries ,Scafffolding ,Stagingand T&P etc. required for the work complete in all respect as directed by the Engineer-in-charge. |
| 42 | For 2 Nos. |
| 43 | Painting with synthetic enamel paint of approved colour, shade and brand like ICI/ Asian/ Berger onSteel workin two or more coats as required to give an evenshade including an under coat of suitable primer of approved brand and manufacturer including cost of all materials with taxesand transportation, loading, unloading, scaffolding,alllabour, sundries, T&P, etc. completeasper the direction of the Engineer-in-charge including filling gaps with putties, scrapping, sand papering and cleaningthe surface to make free from rusts, dusts and oily substancesbefore applying primeretc. complete |
| 44 | For 2 Nos. |
| 45 | SS Letter for gate top Name plate |
| 46 | N.B - The bidders are required to Quote their rates excluding of Goods & Service Tax (GST). GST as applicable will be paid extra. The existing rule of Govt. and any amendment made in future will be followed. |
