Tender For Construction Of 100 Bedded Boys Hostel In Odisha Adarsha Vidyalaya At Timanpur Under Sinapali Block In Nuapada District.
Tender Value
3.37 Crore
Estimated cost
Bid Submission
09 Aug 2023
0 days left
EMD
3.38 Lakhs
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
khariar → Odisha
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of 100 Bedded Boys Hostel In Odisha Adarsha Vidyalaya At Timanpur Under Sinapali Block In Nuapada District. Building Work
BOQ
| Sl. No. | Item Description |
| 1 | CIVIL PORTION OF THE WORK-:Earth work in excavation of foundation in hard soil including dressing and leveling the bed and depositing the soil within 50 m initial lead and 1.5 m initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3 m in depth and as per direction of the Engineer-in-charge. |
| 2 | Supplying and filling in foundation trenches and plinth, ditches with sand well watered and rammed in layers not exceeding 23 cm. in depth with all lead and lift including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour,labour cess, sundries, T&P required for the work etc. complete in all respect as per direction by the Engineer in charge. |
| 3 | Cement concrete of prop.(1:3:6) in foundation up to lowest bed level using crusher broken hard black granite metal of size 4cm down graded of approved quality from approved quarry as per approved design including hoisting,lowering,laying compacting concrete in layers not exceeding 6” thick, watering, curing for three weeks shuttering the exposed surfaces, finished smooth, providing grooves of beads where necessary including cost, conveyance, royalty, & taxes of all materials, with labour, T&P required for the work etc., complete in all respects including dewatering if required as per direction of Engineer-in-Charge. |
| 4 | R.C.C. work of M-20 in following works using 12 mm. to 20 mm. (½” to ¾”) size (20 mm. not to exceed 25%) hard black crusher broken granite stone chips of approved quality from approved quarry including hoisting, lowering, laying and compacting concrete, watering curing, centering, shuttering and finishing the exposed surfaces smooth with cost, conveyance, royalties, taxes of all materials with all labour,labour cess and T & P required for the work etc. complete in all respect but excluding the cost and conveyance of M.S. rods or Tor steel and binding wire of 18 to 20 gauge and labour charges for straightening, cutting, bending, binding and tying the grills and placing in proper position and as per the direction of the Engineer-in-charge. |
| 5 | Ground floor |
| 6 | Column Base |
| 7 | Plinth Beam |
| 8 | Column and beam |
| 9 | Lintel |
| 10 | Fin |
| 11 | Chajja |
| 12 | Stair Case |
| 13 | Roof Slab |
| 14 | Shelve |
| 15 | First floor |
| 16 | Column and beam |
| 17 | Lintel |
| 18 | Shelve |
| 19 | Chajja |
| 20 | Stair Case |
| 21 | Roof Slab |
| 22 | Fin |
| 23 | Second floor |
| 24 | Column and beam |
| 25 | Chajja |
| 26 | Roof Slab |
| 27 | Supplying Cutting, straightening coiled or bent up M.S. Rod or tor steel of primary steel producers(grade Fe-500D) etc. includingbending, binding, welding and jointing if necessary and tying the grills and placing in position as required for R.C.C. Work and for providing fan hooks as required, hoisting, lowering, laying including cost, conveyances, taxes of M.S. Rod or tor steel and binding wires of 18 to 20 gauge and labour required for the work for bending, binding and tying the grills in all floors with labour cess etc. (payment will be made on standard weight of B.I.S. for M.S. Rods or tor steel only) etc. complete. |
| 28 | Ground Floor |
| 29 | First Floor |
| 30 | Second floor |
| 31 | First class Fly ash Brick masonry usingbricks of size 25cm. x 12 cm. x 8 cm. having crushing strength not less than 75 kg. Per. Sqr. Cm. in cement mortar of mix( 1:6) with ordinary Portland slagcement(PSC) andscreened &washedsandformortarafter immersing thebricks for 6 (Six)hoursinwaterbeforeuse inFoundation & Plinth including splays cutting, circular moulding, corbelling, chamfering and similar such type of works, wateringandcuringetc.includingcost,conveyance,loading,unloading, royalties and taxes of all materials, cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as directed by the Engineer-In-Charge. |
| 32 | First class Fly ash Brick masonry usingbricks of size 23cm. x 11 cm. x 8 cm. having crushing strength not less than 75 kg. Per. Sqr. Cm. in cement mortar of mix( 1:6) with ordinary Portland slag cement(PSC)andscreened &washedsandformortarafter immersing the bricks for 6 (Six) hours in water before use in Super stracture including splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as directed by the Engineer-In-Charge. |
| 33 | Ground Floor |
| 34 | First Floor |
| 35 | Second floor |
| 36 | Brick work with Flyash Bricks 25cm x 12cm x 8cm size having crushing strength not less than 75Kg/cm2 with dimensional tolerance ±2 percent in cement mortar (1:4) in Super Structure including watering curing, cost of carriage, royalty and taxes of all materials, cost of all labour, etc complete as per the direction of E.I.C. |
| 37 | Ground Floor |
| 38 | First Floor |
| 39 | Providing 2.5cm thick Grading Concrete over roof slab with cement concrete (1:2:2) using 6mm size black hard granite crusher broken chips and screened & washed sharp sand for mortar and finished smooth to the rough surface of slab including watering and curing with cost, conveyance, royalties and taxes of all materials with cost of all labour, labour cess and T&P required for the work etc. complete in all respect as directed by the Engineer in charge. |
| 40 | Ground Floor |
| 41 | First Floor |
| 42 | Second floor |
| 43 | Supplying, fitting & fixing of Kota Tiles of minimum 16mm thick and above 0.10 sqm of approved make in floors, landing, steps, andcounters over 25mm thick bed of cement mortar (1:1) jointed with cement slurry mixed with pigments to match the shade of the tiles, including rubbing & polishing etc. complete including cost, conveyance, taxes & royalties of all materials, labour with T&P complete in all respect. |
| 44 | Ground Floor |
| 45 | First Floor |
| 46 | Supplying, fitting & fixing of Kota Tiles of minimum 16mm thick and above 0.10 sqm of approved make in dadoes, skirting and risers of nsteps laid on 12 mm thick cement mortar (1:3) (1 cement : 3 course sand) jointed with slurry mixed with pigment to match the shades of the tiles including rubbing and polishing etc. complete including cost of all materials, labour T&P etc. required for the work all complete as per direction of the Engineer-in-charge. |
| 47 | Ground Floor |
| 48 | First Floor |
| 49 | FixingVetrified industrialtiles in floors,treads and landings on 20mm thick bed of cement mortar (1:4) joined with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing including cost of tile. |
| 50 | Ground Floor |
| 51 | First Floor |
| 52 | Supplying, fitting & fixing of Granite Tiles of minimum 16mm thick and above 0.10 sqm of approved make in floors over 25mm thick bed of cement mortar 1:1 jointed with cement slurry mixed with pigments to match the shade of the tiles, including rubbing & polishing etc. |
| 53 | Ground Floor |
| 54 | Supplying, fitting, fixing of Glazed tiles (20cmx30cm / 20cm x 20cm special plain /printed series ceramic wall tiles of premium grade having thickness 6.5mm to 6.7mm confirming to IS 13753) in dados skirting and risers of steps on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to match the shade of the tiles including all costs complete. |
| 55 | Ground Floor |
| 56 | First Floor |
| 57 | Supply fitting and fixing of 32mm thick flush door shutter with approved quality of 30mm thick BWR block board pasted with 1mm thick sunmica on both side of approved design and quality including of all door fitting and fixtures etc. complete. |
| 58 | Ground Floor |
| 59 | First Floor |
| 60 | Second floor |
| 61 | Supplying, fitting & fixing of Two track UPVC sliding windows with 6mm th. glass including cost of all fittings, fixyures all labour & T& P etc. complete. |
| 62 | Ground Floor |
| 63 | First Floor |
| 64 | Supplying M.S Door & Windowmade out with ms flat , angle of approved design & specification including cost of all materials cost of manufacture, cost of one coat of primer,all taxes T&P etc complete as per the direction of Engineer-in-charge. |
| 65 | Ground Floor |
| 66 | First Floor |
| 67 | C.C. (1:2:4)with 12mm and down grade C.B. chips approved quality from approved quarry including hoisting, laying hire charges of concrete mixture, vibrator, watering, curing and including cost, carriage, royalty, cost of all labour T.&P. etc complete and as directed by E.I.C. |
| 68 | Ground Floor |
| 69 | First Floor |
| 70 | Second floor |
| 71 | Providing 12 mm thick cement plaster with cement mortar of mix (1:6) with screened and washed sharp sand for mortar and finished smooth to the RCC works after closed deep chipping & slurry treatment including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties and taxes of all materials with cost of all labour,labour cess, T&P, and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge. |
| 72 | Ground Floor |
| 73 | First Floor |
| 74 | Second floor |
| 75 | Providing 16 mm thick cement plaster with cement mortar of mix (1:6) with screened and washed sharp sand for mortar and finished smooth to the rough surface of walls in all heights after racking out joints including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties and taxes of all materials with cost of all labour,labour cess, T&P, and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge. |
| 76 | Ground Floor |
| 77 | First Floor |
| 78 | Second floor |
| 79 | 6 mm thick cement plaster (1:4) to R CC surfaces finished smooth including closed deep chiping and slury treatment.completeincluding cost and conveyance of all materials, labour with T&P required for the work with all taxes and royalties etc. complete in all respect as per direction of Engineer in charge. |
| 80 | Ground Floor |
| 81 | First Floor |
| 82 | 12mm thick C.P. in C.M.(1:4) over brick masonary to the smooth surface including watering, curing, cost, carriage, royalty and taxes of all materials, cost of all labour, T&P etc complete as per the direction of E.I.C.( OUT SIDE Plaster) |
| 83 | Ground Floor |
| 84 | First Floor |
| 85 | Finishing wall surface with Cement based wall putty (water based) of approved make and finished smooth & even surface to receive painting including cost of scaffolding etc. with cost of all materials, labour etc. complete. |
| 86 | Ground Floor |
| 87 | First Floor |
| 88 | Second floor |
| 89 | Providing and Painting wall Surface one coat with wall Primer to give an even shed before applying weather coat to Exterior walls including cost of Primer , labour, T&P all comp. |
| 90 | Ground Floor |
| 91 | First Floor |
| 92 | Second floor |
| 93 | Providing and applying Plastic Emulsion paint of approved quality and shade over a coat of wall primer of approved quality to surfaces (interior) including throughly brushing the surface free from foreign materials, sand papering smooth the intermediate coats ncluding of all materials, labour, conveyance, taxes, royalties, scaffolding, watering, curing, sundries, tools and plants etc as per the direction of Engineer-in-charge. |
| 94 | Ground Floor |
| 95 | First Floor |
| 96 | Second floor |
| 97 | Finishingto the exposed surfacesof wallwith weathercoat of anyapproved shadeon newwork 2 coatsover a coat of wall primer to give aneven shadeincludingcost of weathercoat all costof materials, labour, conveyance, taxes, royalties, scaffolding, watering, curing, sundries, tools and plants etc as per the direction of Engineer-in-charge. |
| 98 | Ground Floor |
| 99 | First Floor |
| 100 | Second floor |
| 101 | Providing and applying enamel Painting twocoats with any approved paint over a coat of primerincluding sand papering, polishing surfaces, cost of paints, cost of all labour, T&P, etc complete in all floors as per direction of E.I.C. |
| 102 | Ground Floor |
| 103 | First Floor |
| 104 | Second floor |
| 105 | Supplying, fitting and fixing of Stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm x 2mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc with cost, conveyance, taxes of all materials, cost of all labour,labour cess, T&P etc. required for the work complete in all respect as per direction of the Engineer-in-charge. |
| 106 | Ground Floor |
| 107 | First Floor |
| 108 | Providing anti-termite treatment using approved quality of chemical emulsion, spraying the mixture uniformly by sprayer as pre-constructionalanti termite treatment and creating a chemical barrier under and around the column pits, wall trenches, top surface of plinth filling, junction of walls & floors along with external perimeter of the building, expansion joints, surrounding the pipes and conduits etc. complete at the rate as directed by the manufacturer confirming to IS:6313 (Part-II) and as per direction of Engineer-in-charge including cost of all materials, labour, taxes, sundries, T&P etc. complete. (The payments shall be made on the basis of actual plinth area of the building at Ground Floor & vertical faces will not be measured for payment.) Note:- The Contractor shall have to furnish 10years Guarantee to maintain the anti-termite treated area / structures free from termite. |
| 109 | Ground Floor |
| 110 | Supplying fitting ,fixing rain water drainage pipe UPVC pipe 110mm Dia confirming to ISI 13592/1992 to walls with nails, babbing & wooden plug including all cost complete. |
| 111 | Ground Floor |
| 112 | First Floor |
| 113 | Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 mm in thickness. |
| 114 | GPH PORTION OF THE WORK:-Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes conforming to IS:15778, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge |
| 115 | 20mm dia C - PVC pipe |
| 116 | Ground Floor |
| 117 | First Floor |
| 118 | second Floor |
| 119 | 25mm dia C - PVC pipe |
| 120 | Ground Floor |
| 121 | First Floor |
| 122 | second Floor |
| 123 | Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor GI/PVC pipes, class-IV (10 k.g. F/cm) on firming I.S.4985 of the following nominal bore, tube fittings and clamps including making good the wall, ceiling and floor, testing all complete as per specification and direction of the Engineer in charge. |
| 124 | 32mm dia PVC ASTM pipe (sch-80) |
| 125 | Ground Floor |
| 126 | First Floor |
| 127 | second Floor |
| 128 | 40 mm dia PVC ASTM pipe (sch-80)(TOP) |
| 129 | Supplying all materials, labour T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all joiniting materialsincluding cost & conveyance of all materials to worksite, payment oftaxes etc. allcomplete as per P.H specification and direction of the Engineer-in-charge. |
| 130 | 15mm dia CP angle stop cock (Con-CHR-053KN Jaquar make) |
| 131 | 15mm dia CP two in one bib cock (Con-CHR-041KN Jaquar make) |
| 132 | 15mm dia CP Bib cock(Jaquar-Medi series)FLR-CHR-5043N |
| 133 | 15mm dia CP long body bib cock (Jaquar Make)CON-107KN |
| 134 | 15mm dia CP Health faucet (Con-ALD-MCH-573 Jaquar make) |
| 135 | 20mm dia CP consealed stop cock(Con-CHR-083KN Jaquar make) |
| 136 | 25mm dia brassfull way valve (Shakti make) |
| 137 | 32mm dia brassfull way valve (Shakti make) |
| 138 | 40mm dia brassfull way valve (Shakti make) |
| 139 | 15mm CP Extension piece |
| 140 | 125mm CP grating |
| 141 | 15mm size C.P. flange |
| 142 | Supplying all materials , labour, T&P and fixing rotational mouldedpolyethylene cylindrical vertical water storage tanks conforming to IS:12701/1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc. including hoisting upto a height of 5 metres above ground level and placing the tank to the required position and providing 5.40 mtr. lengthx0.25 mtr widthKBbrickwork in cement mortar (1:6) of 0.46m height in staging and 0.13mtr thick circular protection wall of 0.46mtr height to support the tank,12mm thick cement plaster in cement mortar (1:6) over brick work, RCC slab of size 1.60mX1.60m and 0.10m thick ,RCC beam of 0.25mx0.30m and 3.40m average length in cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips and required steel reinforcement including centering and shuttering,watering,curing ,cost of all materials,conveyance of all materials to worksite , payment of royalty, all taxesetc.all complete as per approved drawing , P.H. specification and direction ofEngineer-in-charge |
| 143 | 2000 liters capacityPVC water storage tank roof of 2nd Floor |
| 144 | supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking G.I. Pipes and fittings/ P.V.C. pipes and fittings including watering, curing, cost & conveyance of all materials to worksite,payment of royality, taxes etc. all complete as perdirection ofEngineer-in-charge. |
| 145 | Ground Floor |
| 146 | First Floor |
| 147 | second Floor |
| 148 | Supplying all materials , labour, T&P and cutting holes in RCC floors and roofs upto 19cm thick for passing P.V.C pipes and G.I fittings etc. , and repairing the holes after insertion of pipe etc. with cement concrete (1:2:4) including finishing complete so as to make it leak-proofas per P.H. specification and direction of Engineer-in-charge |
| 149 | Ground Floor |
| 150 | First Floor |
| 151 | First Floor |
| 152 | Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking G.I./P.V.C. pipes and making good the damagesincluding watering ,curing , cost & conveyance of all materials to worksite, payment of royality, taxes etc all complete as per direction of the Engineer-in-charge. |
| 153 | Ground Floor |
| 154 | First Floor |
| 155 | First Floor |
| 156 | Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer\"s specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches , cost & conveyance of all materials to worksite, payment oftaxes etc.all complete as per P.H specification and direction of the Engineer-in-charge. |
| 157 | 110mm U-PVC SWR Pipe (Ori Plast/Finolex/Supreme Make Type-B)including rain water pipes |
| 158 | 110mm U-PVC‘P’ Trap(Ori Plast/Finolex/Supreme Make) |
| 159 | 110mm U-PVC door bend(Ori Plast/Finolex/Supreme Make) |
| 160 | 110mm U-PVC offset without ear(Ori Plast/Finolex/Supreme Make) |
| 161 | 110mm U-PVC Plain bend(Ori Plast/Finolex/Supreme Make) |
| 162 | 110mm U-PVC Cowl(Ori Plast/Finolex/Supreme Make) |
| 163 | 110mm U-PVC S/Jn door(Ori Plast/Finolex/Supreme Make) |
| 164 | 110mm U-PVCDoor tee(Ori Plast/Finolex/Supreme Make) |
| 165 | 110mm U-PVC Socket(Ori Plast/Finolex/Supreme Make) |
| 166 | Supplying all materials, labour, T&P and fixing vitreous china water closet, squatting pan (Indian type W.C pan/Orissa pattern squatting pan) duly embedded in cement concrete (1:5:10) using 4cm size hard granite metal including fixing a pair of vitreous china 250mm x 130mm x30mm footrest, fixing 100mm dia HCI \"p\" or \"s\" trap (with/without 50mm dia horn) for water colset squatting pan including jointing the trap with pan in cement mortar (1:1) cutting the floor and mending good the damages , cost & conveyance of all materials to worksite, payment of royality , taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge. |
| 167 | 580mm size Orissa pan (Hindware/Parryware/Neycer make) |
| 168 | Supplying all materials, labour T&P and and fixing 12.50 liters/10 liters capacity low level flushing cistern with a pair of cast iron or M.S. brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle,unions and couplings for connection with inlet, outlet and overflow pipes, 32mm dia CP long flush bend, 15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connceting the inlet pipe with suupply main , cost & conveyance of all materials to worksite, payment oftaxes etc. all complete as perP.H specification and direction of the Engineer-in-charge |
| 169 | 10 ltr. Capacity pvc L.L. cistern with 32mm. Dia CP long flush bend ( Slimline-white-Parryware make ) |
| 170 | Supplying all materials,labour,T&P and fixing Flat back lipped wall (mini stall urinal -630mmx180mm) urinal of the following sizes including connecting the urinal with 32mm. dia pvc waste pipe 910mm. long by means of white lead mixed with chopped hemp, fixing 32mm. dia CP dome waste, 15mm. dia CP spreader including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc. all complete as per specification and direction of the Engineer in charge Half stall urinal |
| 171 | Supplying all materials, labour, T&P and fixing the following vitreous china Wash Down Water Closet(European type W.C. pan)with integral \"p\" or \"s\" trap to the floor with wooden plug and chromium plated pedestal screws including jointing the trap with soil pipe in cement mortar (1:1) fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers including polishing , cost & conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge |
| 172 | European water closet with \"p\" trap plain(Hindware/Parryware/Neycer make) |
| 173 | Supplying all materials, labour T&P and fixing wash basins with hole for pillar taps with cast iron or M.S.brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered \"Hot\" and \"Cold\" with long screws, shanks and back nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste, cost & conveyance of all materials to worksite, payment oftaxes etc. all complete as perP.H specification and direction of the Engineer-in-charge |
| 174 | 550mmx400mm W.H.basin (Hindware/Parryware/Neycer make)with 15mm dia C.P.pillar cock (Plaza make) with pedestal |
| 175 | Under Counterbasin(560x450)Hindware-No.10095 |
| 176 | Supplying all materials, labour, T&P for fitting & fixing plain edge kitchen/wall sink of all standard sizes with a pair of bracket, C.P. waste, trap & P.V.C. waste pipe & painting brackets including supply of cement concrete & mortar etc. all complete. 24” x 18” x 10” sink |
| 177 | Supplying all materials, labour, T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge |
| 178 | 25mmx600mm long CP towel rail |
| 179 | Towel ring |
| 180 | Supplying all materials, labour, T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge |
| 181 | CP soap holder |
| 182 | Supplying all materials, labour, T&P and fixing standard sized glass-shelf with CP brass brackets and guard rail complete fixed to wooden plugs with CP screws as per specification and direction of Engineer in charge. |
| 183 | 600mmx125mm plate glass shelf |
| 184 | Supplying all materials, labour, T&P and fixing mirror of superior glass mounted on 6mm.thick A.C. sheet or ply wood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of Engineer in charge. |
| 185 | 600mmx450mm size B.E mirror (swivelled type) |
| 186 | Large Size mirror with Frame (9x0.90x0.75)= 6.07 |
| 187 | Supplying all materials labor T&P & Fitting & fixing CP shower with rim with supply of red lead and yarn nail complete as per direction of Engineer in charge. |
| 188 | 15mm CP revolving shower (Jaquar)CON-CHR-209KN |
| 189 | Supplying all materials , labour, T&P and cutting holes through existing brickor laterite masonry wall for takingU-PVC pipes and fittings including making good the damages etc. all complete as per P.H. specification and direction of Engineer-in-charge |
| 190 | Supplying all materials , labour, T&P and cutting of RCC chajja for taking HCI or U-PVC pipe and fittings including making good the damages etc. all complete as per P.H. specification and direction of Engineer-in-charge |
| 191 | Supplying all materials ,labour ,T&P and constructing Inspection Chamber ofinside size 760mmx760mmx460mmwith cement concrete (1:3:6) using 40mm size crusher broken hard black granite metal on bed , KB brick work in cement mortar (1:6) in foundation and plinth, moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips,12mm thick cement plaster (1:3)with cement punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab (1:2:4) using 12mm size crusher broken hard black granite chips with R.C.C man hole cover, earth work in excavation in all kinds of soil and refilling the cavity around the chamber including watering,curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxesetc.all complete as perapproved drawing, P.H specification and direction of Engineer-in-charge |
| 192 | Inside size 76cmx76cmx46cm with 18” dia RCC MH cover |
| 193 | Supplying all materials labour T&P filling sand in lavatories well watered and rammed including lead of materials to work site. |
| 194 | Ground Floor |
| 195 | First Floor |
| 196 | Second Floor |
| 197 | Supplying all materials, labour, T&P and providing cement concrete ( 1:2:4 ) with 12mm size crusher broken hard black granite chips including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge |
| 198 | Ground Floor |
| 199 | First Floor |
| 200 | Second Floor |
| 201 | Supplying all materials, labour, T&P and providing and fixing ceramic tiles in floors, treads or steps and landing on 25mm thick bed of cement mortar (1:1) ( 1 cement : 1 sand ) jointed with neat cement slurry mixed with pigment to match the shades of the tilesincludingwatering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge ( ceramic floor tiles of premium grade having thickness 7mm to 8mm conforming to IS 13755 of size Kajaria/Somany/Johnson tile 30cmx30cm special printed seriesto be pre-approved by the Engineer-in-charge ) |
| 202 | Kajaria/Somany/Johnson tile 30cmx30cm |
| 203 | Ground Floor |
| 204 | First Floor |
| 205 | second Floor |
| 206 | Granite Tiles 10mm Thick |
| 207 | Ground Floor |
| 208 | First Floor |
| 209 | second Floor |
| 210 | Supplying all materials,labour,T&P and providing 12mm thick cement plaster(1:4) on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,paymentof royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge. |
| 211 | Ground Floor |
| 212 | First Floor |
| 213 | second Floor |
| 214 | Supplying all materials, labour, T&P and providing and fixing porcelain glazed tiles in dado skirtingon 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tilesincludingwatering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge( ceramic wall tiles of premium grade having thickness 6.5mm to 6.7mm conforming to IS 13753 of size Kajaria/Somany/Johnson tile 45cmx30cm special plain / printed series to be pre-approved by the Engineer-in-charge ) |
| 215 | Kajaria/Somany/Johnson tile 45cmx30cm |
| 216 | Ground Floor |
| 217 | First Floor |
| 218 | second Floor |
| 219 | Granite Tiles 10mm Thick - 12 x 1.50 x 0.60 |
| 220 | Factory made single leaf Solid WPC (Wood polymer) composite door shutter of 25mm thickcompacted with wood grain finishstructural foam panel of 29mm thickness and a density of 20kg/cu.mtr shall be used as core material for fitting the metal fittings such as tower bolts, aldrops, handles etc shall be provided. A structural adhesive compatible with (EPS) foam shall be used for bending the core material,The material and process for manufacturing the door shutters shall conform to RV-TIFAC composites Design Centre\"s standards and specifications and the door shutters Conforming to relevant I.S.specification. The finish of door shutter will be plain colour white/ Ivory/ Beige/ Light grey/ Mahogany/ Teak wood or any other colour using high quality pigments. Three heavy whight mild steel butt hinges type-I(ISI marked) size 100mm are to be fitted on one side of shutter. |
| 221 | Factory made Solid WPC door frame of size 95mmx55mm fabricated .The door frame consist of four segments which are provided with plug-in-socket arrangement in-situ in the mould. The segments are plugged in and are joined together by means of screw. The WPC frame shall be provided with The material and process for manufacturing the door frames shall conform to Relavent I.S.specification. The finish of door frame will be plain colour white/ Ivory/ Beige/ Light grey/ Golden brown/Mahogany/ Teak wood/sand stone/Champagne/Pastel blue or any other colour using high quality pigmentscomplete in all respect as per specification and direction of the Engineer in charge |
| 222 | Fitting and Fixing of Aquagurad Cooler Cum Purifier for Drinking Water Privision 1 No. |
| 223 | Cost of Aquaguard Cooler |
| 224 | Supplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized P.V.C. pipe conforming to IS 4985/2000 of the following out side dia for class- 3 (0.60mpa ) including jointing with supply of approved solvent cement by non-heat application method/as per manufacture\"s specification, provoding and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the type C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per P.H. specification and direction of the Engineer in charge |
| 225 | 110mm dia u-pvc pipe alround concrete |
| 226 | 160mm dia u-pvc pipe alround concrete |
| 227 | Supplying all materials labour T&P and constructing 1.80m dia x 2.60 m deep soak way pit with dry brick having crossing strength not less than 75Kg/CM2 to 99Kg/CM2 in CM(1:6) for the remaining 0.4572mm height of wall at top CC(1:3)inside and outside inside fill with dry brick khoa size 38mm ,CM thick RCC perforated slab to a height of 1.9012m from bottom covered by means of 50mmthick RCC wall cover in pieces filled with iron plugs including earth work in excavation refilling of cavity around the pit and painting the iron works complete as per PHD design and specification including carriage of all materials to site. |
| 228 | 2 nos100 Users septic tank |
| 229 | Earth work in excavation of foundation in all kinds of soil with in 1.5m initial lift including dressing and leveling of bed and breaking the clods and the excavated materials with in 50m initial lead as per direction of Engineer in charge. |
| 230 | Earth work in excavation of foundation in all kinds of soil with in 1.5m initial lift including dressing and leveling of bed and breaking the clods and the excavated materials with in 50m initial lead as per direction of Engineer in chargewith 1st extra lift of 1.50 m over initial lift. |
| 231 | Supplying all labor T&P & filling foundation and plinth with excavated materials well watered & rammed etc. all complete as per direction of EIC. |
| 232 | Supplying all materials, labour, T&P and providing cement concrete ( 1:3:6 ) with 40mm size crusher broken hard black granite metal including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge. |
| 233 | Supplying all materials, labour, T&P and providing cement concrete ( 1:2:4 ) with 12mm size crusher broken hard black granite chips including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge |
| 234 | Supplying all materials, labour, T&P and providing cement concrete (1:1.5:3) with 12mm size hard broken granite chips for R.C.C works including hoisting, laying, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge |
| 235 | Supplying all materials, labour, T&P and providing steel reinforcement of Fe-415 /Fe-500 grade for RCC work including cutting,bending,bindingand tying the grills and placing in position including cost of binding wire 18 to 20 gauge,cost of steel, conveyance of all materials to worksite, payment of royalty,all taxes etc all complete as per PWD specification and direction of the Engineer-in-charge. |
| 236 | Supplying all materials, labour, T&P and providing rigid & smooth centering and shuttering for RCC works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc. all complete as perspecification and direction of the Engineer-in-charge |
| 237 | RCC floor, roof slab chhaja up to 4.430 m height |
| 238 | Supplying all materials.labour.T&P and providing brick work in foundation and plinth with Fly ash bricks having curshing strength not less than 75 kg/sqcm with dimensional tolerance+ 8% in cement mortar ( 1:4 ) including watering,curing,cost of all materials,conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer in charge. |
| 239 | Supplying all materials,labour,T&P and providing 12mm thick cement plaster(1:4) on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,paymentof royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge. |
| 240 | Supplying all materials, labour, T&P and providing cement punning including watering, curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc. all complete as perspecification and direction of the Engineer-in-charge Plaster (1:4) inside |
| 241 | Construction of 1nos production wells including scientific source finding through consolidated and unconsolidated rock with down the hammer drilling rig or combination rig with PVC pipe and installation of submersible pump set with all acessories |
| 242 | Labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level through consolidated and unconsolidated rock with down the hole hammer drilling rig or combination rig as required to suit the site condition as per the direction of the Engineer in charge including use of own rig with its accessories, tools and plant and consumables etc for lowering of 200mm/150mm dia G.I/P.V.C/M.S casing pipes for housing fitted with socket and with or without well screen as per the necessity for soft, medium, hard and boulder formation (G.I/ P.V.C/ M.S casing pipes if required to prevent collapse of overburden is to be provided by the contractor including lowering and withdrawing after completion of the tube well), 200mm dia to 400mm dia in overburden portion including packing of gravel supplied by the contractor for 400mm dia bore only |
| 243 | Drilling of 200mm dia bore |
| 244 | 00 mtr to 30mtr |
| 245 | Drilling of 150mm dia bore |
| 246 | 31 mtr to above |
| 247 | Lowering the following size of G.I/P.V.C/M.S housing pipes with or without slotted pipes as per the necessity from ground level up to 45.00m depth and fitted and fixed up in perfectly vertical position including cutting and threading of pipes and slotted pipes and supplying and fixing all jointing materials, tools and plant etc all complete and keeping the top of casing pipe threaded including plugging tube wells to prevent entry of foreign materials. |
| 248 | Lowering of 200mm dia P.V.C casing pipes |
| 249 | 00 mtr to 30 mtrs |
| 250 | Supplying polyvinyl chloride pipes as per ASTM-D-1785-89 having threads in accordance with DIN 2999 part-1/DIN-42225 part-II specification length of pipe (laying length) will be 3 mtrs. The pipes shall be supplied with both external and threaded with free socket. The pipe having external thread at one end i.e female and or belled end. The female end having internal thread is to be belled in order to accept the male end while jointing pipes with a bore threading shall be provided with a greave at the roof of the male thread accomodate flexible PVC/Rubber \"O\" ring to make the joint water tight colour of the pipe shall be blue. The name of the manufacture along with batch No class of pipe shall be stranded legibly of each pipe length. |
| 251 | 200mm dia PVC (sch-80) pipe |
| 252 | Supplying all materials, labour, T&P and providing and providing sanitary sealing by cement concrete grouting of annular space around GI/PVC/MS housing pipe upto 5m below ground level (as per drawing) to plug the bore hole excluding cost of cement all complete as per direction of the Engineer in charge. Minimum one metre of casing pipe to be inserted in the bore into the rock at the bottom to ensure sanitary sealing (excluding cost of cement which will be supplied directly by the department) |
| 253 | Cleaning and developing the tube well with supply of compressor worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per direction of the Engineer in charge |
| 254 | By DTH Rig |
| 255 | Supplying all materials, equipment, labour & conducting reconnaissance survey, integrated Hydrological and Geophysical (Electrical Resistivity Method) survey & selection of potential source for exploration of Ground Water including selection and recommendation of site for drilling wells in selected locations in any part of Orissa under the following Geological formation: |
| 256 | Rocky terrain with boulder formation for 300m depth |
| 257 | Supplying all materials , labour T&P and providing consturction of plat form as per UNICEF specifcation etc.all completes as per direction of Engineer-in-Charge |
| 258 | Supplying all materials ,labour T&P and providingfitting and fixing India Mark-II hand pump with C I Cylender and connectiong roads with providing 24.00 mtr of 32 mm dia GI raiser pipe etc. all complete as perP.H Specification and direction of Engineer-in-Charge |
| 259 | Supplying all materials, labour, T&P and providing, fitting and fixing submersible pump with squirrel cage induction type submersible type submersible electric motor to run on 3 phase/1 phase line voltage ranging from 320 volt to 450 volt conforming to IS: 8034/89 with following specifications with suitable control panel, jointing with GI/PVC/HDPE pipes, electrification, testing, commissioning, trial running, conveyance of all materials to worksite, payment of taxes etc all complete as per specification and direction of the Engineer in charge (Texmo/Crompton Greaves/Kirloskar make) |
| 260 | 1 H.P. Single phase/ three phase 3 stagehead renge of 20 to 35 mtr with discharge capasity 145 to 110 L.P.M With outlet dia 25 mm |
| 261 | DOL Control panel |
| 262 | 40mm dia steel short piece |
| 263 | Well cap |
| 264 | 50mm size CI bracket |
| 265 | 2.50sqmm flat cable |
| 266 | 20mm dia rigid UPVC pipes |
| 267 | Steel rope with cover |
| 268 | Labour charges for lowering including transportation |
| 269 | Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor HDPE pipes and pipe fittings conforming to IS: 4984/2000 (10kgf/sqcm) of the following nominal bore with clamps and jointing by Fusion welding method including testing, making good the wall, ceilingand floor all complete as per specification and direction of the Engineer in charge |
| 270 | 32mm HDPE pipes (Finolex/Supreme make) |
| 271 | EI PORTION OF THE WORK:- Recessed wiring to Light/ Fan/ Call bell and Exhaust fan point with 1.5 mm2 FRLSH PVC insulated single core multistrand copper conductor of ISI marked with 50mm dia Non metallic with 20mm dia non metalic PVC flexible conduit with5/6 250volt Modular type switch,ceilling rose mounted on MS box having front bakelite cover of suitable size M.S box with 1.5mm2 FR pvc insuleted S/C multistand copper conductor as earth wire Including all accessories and connection.as per direction of ingineer-in-charge. (Make of wire:- Finolex/Anchore/ Havels/HPL/L&T/ V.Guard & Make of Switch/Socket-Legrand/Hager/Havells) |
| 272 | a)Group-A |
| 273 | b) Group-B |
| 274 | c) Group-C |
| 275 | Recessed wiring to 5/6A socket outlet with 2x1mm2 PVCInsulated S.C.FRLSH multistrand Cu.wire ISI marked in 20mm non-metalic PVC flexible conduit pipe with Modular type switch. |
| 276 | a) Group-A |
| 277 | b) on existing board |
| 278 | Recessed wiring to power plug point with 2x4mm2 PVCInsulatted S.C FRLSH multistrand Cu.wire ISI marked in 20mm non-metalic PVC flexible conduit along with1x2.5mm2 F.R PVC insulated S.C C.U. wire for loop earthing as required.(Make of wire finolex/Anchor/Havells /HPL/V.Guard ) |
| 279 | Wiring to Circuit/ Sub-main along with earth wire with following size of FRLSHPVC S.C.Cu. Wire (Make of wire Finolex/ Anchor/ Havels/HPL/L&T/ V.Guard. |
| 280 | 1x1.5mm2 Sub-Main Wiring for Invertor connectiom. |
| 281 | a) (1.8.1) 2X1.5mm2 + 1x1.5mm2 |
| 282 | b) (1.8.2) 2X2.5mm2 + 1x1.5mm2 |
| 283 | c) (1.8.3) 2X4mm2 + 1x1.5mm2 |
| 284 | d) (1.8.4) 2X6mm2 + 1x2.5mm2 |
| 285 | S/Fof step type electronic fan regulator of havells/legrand/equivalent make |
| 286 | S/F of1200mm Ac ceilling Fan of model usha Allure plus (ivory/White colour)/ bajaj Regal gold NXG (ivory/white)/ Havells festiva/equs(white/titanium)/ equivalent make of mentioned brand w/o Regulator as per direction of engineer in charge |
| 287 | S/F of 18wt LED T.L fitting of Phillips/ Bajaj/Havels make |
| 288 | S/F of 1650 VA UPS( Microtake/Luminous)with1nos 150 AH Sine Wave inverter battery ( make Exide/Amaron/Luminous or equivalent) |
| 289 | S/F of Modular Angle Holder. |
| 290 | S/F of9wt LED Bulb of Havels/HPL/Bajaj make. |
| 291 | S/F of 300mm Exhaust Fan of model Usha turbo jet /Bajaj freshee with louvers i.e safe guard . |
| 292 | S/F of 18watt Surface mounted LED down light complete of Havells/Bajaj/HPL make. |
| 293 | S/F of Ultra modern surface mounted Decorative oval Bulk head edge LED Luminaire complete with 10watt LED lamp. (Make Hvells/Endura Rugby model) |
| 294 | S/F of (4+12) way double door TPN distribution Boxfor single phase out goingincoming- 63Amp TPN MCB of havells make, outgoing- 6 x 32A DP MCBas per direction of engineer in charge( DB & MCB of make Schnider/Hager/Legrand/L&T) |
| 295 | S/F. of 12 Way double door D.Box with 1x32Amp DP MCB of \"C\" series +10 x(10 -16)A.SP MCB of \"B\" Series as per direction of engineer in charge( DB & MCB of make Schnider/Hager/ Legrand/ L&T) |
| 296 | S/F 3 1/2 x 35 mm2 PVC Al Armoured Cable Of ISI Marked (Polycab/Nicco/ Havells) |
| 297 | Laying of cable on wall surface. |
| 298 | Cost for supply and fixing of Cable tray of required size to be installed at corridor& junction points as per direction of engineer in charge |
| 299 | Provision of Lightening arrestor with 85mm dia 3mm thick Copper base plate and Copper flat 20mm width x 3mm thick including all accessories. |
| 300 | S/F of Special Earthing complete with provision of 600x600x3.15mm thick copper plate along with 25x5mm copper strip in 40mm dia GI pipeincluding soldering of strip if necessary and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal and salt as required. |
| 301 | S/F 3 1/2 core x 70 mm2 PVC Al Armoured Cable of ISI Marked (Polycab/Nicco/Havels) |
| 302 | Layingof Cable in Trenching in all type of soil with excavation of earth,sand cushing and brick laying etc.& filling of loose soil upto ground level. |
| 303 | S/F of extra long No.8 G.I.wire for running of earth. |
| 304 | Fabrication of 160A panel board of size 1050mmx 1260mm x 330mm with powder coat made out of 18 SWG CR sheet with Incoming:Adjustable thermal & adjustable magnetic setting with ics=100% Icu 160Amp 36KA 4-pole MCCB-1No,200A 25mm x 12mm size TPN Copper Busbar-1no, Outgoing: 63Amp MCCB four pole 16KA breaking capacity-10Nos, 40Amp DP MCB -6Nos,160Amp four pole Onload Change over switch-1No,Digital Volt meter & Ammeter, CT coil,RYB indicator,Transporation and fixing charges etc. (Main Incomer Panel Board) Protecective device(MCCB,Changeover switch) should have make of (L&T/Hager/Schnider/legrand) |
| 305 | S/F of90wt LED Street light of Havells/HPL/Bajaj make. |
| 306 | Supply and Fixing of GI bend pipe for street lightincluding all accessories i.e clamp or jam lock etc |
| 307 | S/F of computer Board consisting of 3 Nos of Modularplug and switchall accessories including recessed wiring,Cutting of wall & connection as per requirement. |
| 308 | S/F of Call Bell with Bell push and flexible cord of any ISI make. |
| 309 | S/F of 4kg ABC Dry power (S/P) Type Fire Extinguisherpressurized with dry Nitrozen gas at 15 bar.as per IS 15683 with fire rating 2A,21B,at 35 bar,operating temperature-30 C to + 55 C,supplied with standard accessories of ISI marked as per direction of engineer in charge. |
| 310 | S/F of 6Nos of Fire Bucket with Fire Bucket Stand made up of Galvanized mild steel conforming to IS-2546-1974. |
| 311 | Supply & Laying of Class-C Rubber Mat of ISI marked conforming to IS-15652/2006 having Di-electric strength of 65KV and size-(1mtr.x2mtr.x8mm). |
| 312 | First Floor:- |
| 313 | Recessed wiring to Light/ Fan/ Call bell and Exhaust fan point with 1.5 mm2 FRLSHPVC insulated single core multistrand copper conductor of ISI marked with 50mm dia Non metallic with 20mm dia non metalic PVC flexible conduit with5/6 250volt Modular type switch,ceilling rose mounted on MS box having front bakelite cover of suitable size M.S box with 1.5mm2 FR pvc insuleted S/C multistand copper conductor as earth wire Including all accessories and connection.as per direction of ingineer-in-charge. (Make of wire- Finolex/Anchor/ Havells/HPL/L&T/ V.Guard & Make of Switch/Sockets-Legrand/Havells/Hager) |
| 314 | a)Group-A |
| 315 | b) Group-B |
| 316 | c) Group-C |
| 317 | Recessed wiring to 5/6A socket outlet with 2x1mm2 PVCInsulatted S.C FRLSH multistrand Cu.wire ISI marked in 20mm non-metalic PVC flexible conduit pipe with Modular type switch/Sockets. |
| 318 | a) Group-A |
| 319 | b) on existing board |
| 320 | Recessed wiring to power plug point with 2x4mm2 PVCInsulated S.C FRLSHmultistrand Cu.wire ISI marked in 20mm non-metalic PVC flexible conduit along with1x2.5mm2 F.R PVC insulated S.C C.U. wire for loop earthing as required.(Make of wire finolex/Anchor/Havels /HPL/V.Guard ) |
| 321 | Wiring to Circuit/ Sub-main along with earth wire with following size of FRLSH PVC S.C.Cu. Wire (Make of wire Finolex/ Anchor/ Havels/HPL/L&T/ V.Guard. |
| 322 | 1x1.5mm2 Sub-Main Wiring for Invertor onnectiom. |
| 323 | a) (1.8.1) 2X1.5mm2 + 1x1.5mm2 |
| 324 | b) (1.8.2) 2X2.5mm2 + 1x1.5mm2 |
| 325 | c) (1.8.3) 2X4mm2 + 1x1.5mm2 |
| 326 | d) (1.8.4) 2X6mm2 + 1x2.5mm2 |
| 327 | S/Fof step type electronic fan regulator of havells/legrand/equivalent make |
| 328 | S/F of1200mm Ac ceilling Fan of model usha Allure plus (ivory/White colour)/ bajaj Regal gold NXG (ivory/white)/ Havells festiva/equs(white/ titanium)/ Crompton Diago/equivalent make of mentioned brand w/o Regulator as per direction of engineer in charge |
| 329 | S/F of 18wt LED T.L fitting of Phillips/ Bajaj/Havels make |
| 330 | S/F of 1650 VA UPS( Microtake/Luminous)with1nos 150 AH Sine Wave inverter battery ( make Exide/Amaron/Luminous or equivalent) |
| 331 | S/F of Modular Angle Holder of any ISI make. |
| 332 | S/F of9wt LED Bulb of Havels/HPL/Bajaj make. |
| 333 | S/F of 300mm Exhaust Fan of model Usha turbo jet /Bajaj freshee with louvers i.e safe guard . |
| 334 | S/F of 18watt Surface mounted LED down light complete of Havells/Bajaj/HPL make. |
| 335 | S/F of Ultra modern surface mounted Decorative oval Bulk head edge LED Luminaire complete with 10watt LED lamp. (Make Hvells/Endura Rugby model) |
| 336 | S/F of (4+12) way double door TPN distribution Boxfor single phase out goingincoming- 63Amp TPN MCB of havells make, outgoing- 6 x 32A DP MCBas per direction of engineer in charge( DB & MCB of make Schnider/Hager/Legrand/L&T) |
| 337 | S/F. of 12 Way double door D.Box with 1x32Amp DP MCB of \"C\" series +10 x(10 -16)A.SP MCB of \"B\" Series as per direction of engineer in charge( DB & MCB of make Schnider/Hager/ Legrand/ L&T) |
| 338 | Cost for supply and fixing of Cable tray of required size to be installed at corridor& junction points as per direction of engineer in charge |
| 339 | S/F of computer Board consisting of 3 Nos of Modularplug and switch,all accessories including recessed wiring,Cutting of wall & connection as per requirement. |
| 340 | S/F 3 1/2 x 35 mm2 PVC Al Armoured Cable Of ISI Marked (Polycab/Nicco/ Havels) |
| 341 | Laying of cable on wall surface. |
| 342 | S/F of Call Bell with Bell push and flexible cord of any ISI make. |
| 343 | Provision of 11/0.4KV 63KVA Transformer,11/0.4KV Substation, Approaching HT/LT Line along with all required accessories,Deposit of Inspection Fees & complete Line charging.(Details will be received from TPWODL authority during execution of work) |
AI Tender Summary
Tender Timeline
Jul 28, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedAug 09, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedAug 10, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender