|
| 1 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required.A Group |
| 2 | Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way piano type switch, phenolic laminated sheet, suitable size MS box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required. |
| 3 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.(i)2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire |
| 4 | (ii) 2X4sq.mm+ 1X4 sq. mm earth wire |
| 5 | Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required.(i)5/6 amps switch |
| 6 | 3 pin 5/6 A socket outlet |
| 7 | Supplying and fixing brass batten/ angle holder including connection etc. as required. |
| 8 | Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required. |
| 9 | Supplying and fixing metal box of 150mm X 75mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 3 pin 5/6 A socket outlet and 5/6 A piano type switch, connections, painting etc. as required. |
| 10 | Supplying and fixing metal box of 180mm X 100mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 6 pin 5/6 & 15/16 A socket outlet and 15/16 A piano type switch, connections, painting etc. as required. |
| 11 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)(i)8 way , Double door |
| 12 | 8 way , Double door |
| 13 | Supplyingand fixing 5 ampto 32 amp rating 240 volts\"C\" curve miniature circuit breaker suitable for inductive load of following poles in the existingMCB DBcomplete withconnectiontesting and commissioning etc. as required.a) Single pole |
| 14 | b) Single pole and neutral |
| 15 | Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/coke and salt as required. |
| 16 | Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. |
| 17 | Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required. |
| 18 | Providing and laying earth connection from earth electrode with 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earth electrode including connection with G.I. thimble excavation and re-filling as required. |
| 19 | Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required |
| 20 | Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required |
| 21 | Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long, G.I. tube, having single prong at top, with 85 mm dia 6 mm thick G.I. base plate including holes etc. complete as required. |
| 22 | Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For vertical run) |
| 23 | Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For horizontal run) |
| 24 | Providing and fixing testing joint, made of 20 mm X 3 mm thick G.I. strip, 125 mm long, with 4 nos. of G.I. bolts, nuts, chuck nuts and spring washers etc. complete as required. |
| 25 | Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. Direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc complete as required. (REX Polyextrusion / Jain Irrigation / Duraline / Avadh Polytube/ Gemini make) (i)63 mm dia (OD-63 mm & ID-51 mm nominal) |
| 26 | Supplying and Laying of one number PVC insulated and PVC sheathed / XLPE power cableof 1.1 KV grade aluminium armoured conductor of size 2 x 25 Sqmm direct in ground including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering. Make- Havells/KEI/Polycab/Finolex etc. |
| 27 | Supplying & laying of one numberXLPE insulated and PVC sheathed, armoured aluminium power cable of 1.1 KV Grade of size 2 X 25 Sq. MM conf to IS: 7098 (Part-I) in the existing RCC/HUME/METAL PIPE as required. |
| 28 | Providing and fixing of9 Watt, 3000-6500 K LEDBulb in the existing batten holder including connection etc as required of havells/ Crompton / Philips make. |
| 29 | S/I/T/C of 250 mm sweep fresh air fan plastic body complete with louvers etc, including making the hole and making good the damage and making the same with connection, testing, commissioning etc. as required. USHA/ Havells/ Crompton/Bajaj make. |
| 30 | S/I/T/C of 20 Watt, 6500 K LED batten Decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient with LED inbuilt driver make of Havells (pride plus ) of CG/Bajaj/Philips including connection etc as required. |
| 31 | S/I/T/C of 240V, 50 HZ 1200 mm Sweep Ceiling Fan having down rod, 02 Nos Canopy including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required of Crompton Model- Cool Breeze or equivalent specification/model of Havells/Bajaj/usha including connection etc as required. |
| 32 | Supplying and fixing step type electronic fan regulator (socket type) on the existing switch box including connections etc. as required of Anchor / Havells / Cona make. |
| 33 | S/I/T/C of 10 Watt, Mirror light ,6500 K LED batten ultra slim square profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient with LED inbuilt driver make of Havells (model - Elite LED Pride plus Neo) or CG/Bajaj/Philips including connection etc as required. |
| 34 | Supplying and Fixing of 4 Module, 3000-6500K LED Footlightwith polycarbonate housing incuding P/F 4 Module GI Box for fixing Fooltlight including connection etc as required. Make Havells/L&T/Legrand |
| 35 | S/I/T/C 6 Watt , 6000 K surface mounted round/Square shaped LED downlighter with durable Aluminium housingto give glare free light withdriver of HavellsModel TRIM COSMO SURFACE ROUND 6 Watt, 6000 Kor compatable make of Bajaj/Philips/CGi.c connection etc as required. |
| 36 | Supply, Installation, Testing and commissioning of 1.2 KWp Off-Grid Solar system comprising of Mono-crystalline PV Panel >=400Wp mounting on GI structure with tilt angle of 15-20 degree as per site co-ordinate for maximum absorption of Sun light, Low maintenance Solar Tubular Lead Acid Battery 24V x 150Ah suitable for Single Phase 230V/50Hz. Pure sine wave Solar Hybrid Inverter 1600VA with charging option from solar and Grid/DG as per availability. Detailed Specification- (1) Battery 02 Nos, Nominal Voltage- 12 Volt, Nominal Capacity- 150 AH with 03 year warranty Make, Luminous ,Exide or equivalent make (2) Structure -GIStructure will be fixed on CC foundation(1:2:4) 3) Inverter make- Microtek, Luminous, Exide or equivalent make.4) Wiring with 3x4 Sqmm FRLSHSolar copper conductor. Complete connection andinstallation on siteshall be as per direction of engineer-in-charge |
| 37 | SITC of desert air Cooler having 4-Way Air Deflection, Honeycomb pads, 40 Ltr Water tank capacity, Auto Swing vertical Louvers, Ice chamber on the top, Max Wattage 140 Watt with inverter compatibility, air delivery of 2100 m3/hr, Fan Motor with overload protection. The cooler mounted on 04 nos castor wheels etc as required as per direction of engg in Charge(make- Crompton model-Cool breeze DAC 40 or similar in Havells/Bajaj/Symphony iquivalent to Crompton model) |
| 38 | Add GST difference Multification factor (0.0633) on DSR Items (Srl no-01 to 21). On Rs. 511627/- |