Tender For Comprehensive Maintenance To Otm Accommodation For B/R And E/M Works Of Certain Units Under Ge (North) Binnaguri
Tender Value
39 Lakhs
Estimated cost
Bid Submission
10 Aug 2023
0 days left
EMD
78000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
binnaguri → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Comprehensive Maintenance To Otm Accommodation For B/R And E/M Works Of Certain Units Under Ge (North) Binnaguri
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling floor, hearth or wall tilling including cement mortar being (but not backing), and rubbish throw off the premises complete all as specified and as directed. |
| 2 | Demolition of cement concrete (unreinforced) including existing treatment of any description and in any position not otherwise specifically provided for complete all as specified and as directed. |
| 3 | Material and labour for 75mm thick PCC (1:3:6),type C-2 (using 40 mm graded crushed stone aggregate) as in plinth protection; etc laid in bays / panels not exc. 2.00 Sqm eachincluding construction joints at suitable interval and each corner and filled with bituminous mastic filling (1 part bitumen & 3 part sand) and finished the surface even and smoothwithout using extra cement complete all as specified and as directed. |
| 4 | M&L for 75mm thick PCC type C-2, (1:3:6) using 40mm graded stone aggregate as in sub base complete all as specified and as directed. |
| 5 | M&L for 60 mm thick prepolished coloured Machine pressed precast concrete interlocking paver block chemically treated any shape and size confirming to IS 15658-2006 of M-35 Grade with grey cement and pigment complete all as specified and as directed. |
| 6 | M&L for sand filling as sand cushioning under interlocking paver block complete all as specified and as directed. |
| 7 | M&L for Vitrified Ceramic tiles light shade 8-9 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, laid over 15mm thick screed bed in CM (1:6) as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles as in floor complete all as specified and directed. |
| 8 | M&L for non skid coloured joint free ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.11Sqm but n. exc. 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in whiter or coloured cement to match as in floor over 15mm thick screed bed in CM (1:6) complete all as specified and as directed |
| 9 | M & L for glazed ceramic colour tiles450X300X 7 mm thick as on vertical surface of wall such as skirting, dado, riser etc.set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile approved laid over 10mm thick rendering in CM (1:4) as in vertical surfaces of skirting dados repairs to steps complete all as specified and as directed |
| 10 | M & L for non skid coloured ceramic floor tiles 7 to 8 mm thick (square/rectangular) area of each tile exc 0.18 sqm but n exc 0.38 sqm, in floor etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the surface with 15mm thick screed bed or bedding layer in CM (1:6) complete all as specified and as directed. |
| 11 | M&L for 300x300x25 mm thick prepolished chemically treated chequered tiles set and jointed in neat cement slurry including 15mm thick screed bedin CM(1:6) and pointed in white or coloured cement mixed withmixture of pigments to match with the colour of tiles including demolition of existing floor tiles complete all as specified and as directed. |
| 12 | M&L for preparation of old decorated surfaces of wall by brooming down or steel wire brushing scrapping down to remove smoke soot moulds moss and efflorescence salts and treating oil and greasy spots etc and applying a coat of colour wash complete all as specified and as directed. |
| 13 | M&L for preparing old decorated plastered or unplastered surfaces of walls including cornices, plaster and other wall features etc by brooming down or steel wire brushing scrapping down to remove smoke soot moulds moss and efflorescene salts and treating oil and greasy spots etc and applying one coat of white washing on the same all as complete all as specified and as directed. |
| 14 | M&L for preparing old decorated plastered or unplastered surfaces of ceilings including cornices, plaster and other wall features etc by brooming down or steel wire brushing scrapping down to remove smoke soot moulds moss and efflorescence salts and treating oil and greasy spots etc and applying one coat of white washing on the same all as complete all as specified and as directed. |
| 15 | M&L for preparing oil bound distemper surfaces of walls including cornices, plasters and other wall features etc by washing rubbing down and stoppingand applying one coat of oil bound distemper on the same withincluding wall putty/white cement wherever required to fill the wall cracks/holes complete all as specified and as directed. |
| 16 | M&L for preparing oil bound distemper surfaces of ceiling including cornices, plasters and other wall features etc by washing rubbing down and stopping and applying one coat of oil bound distemper on the same withincluding wall putty/white cement wherever required to fill the wall cracks/holes complete all as specified and as directed. |
| 17 | M&L for preparation of old surfaces of wall/chajja/facia and applying a coat of external weather proof paint complete all as specified and as directed. |
| 18 | M&L for preparation of old painting to wooden and wooden based surfaces of any description not otherwise described, over 10 Cm width or girth and applying one coat of synthetic enamel paint on the same complete all as specified and as directed. |
| 19 | M&L for preparation of old painting to steel surfaces of any description not otherwise described, over 10 Cm width or girth and applying one coat of synthetic enamel paint on the same complete all as specified and as directed. |
| 20 | Hacking out old broken unserviceable glass panes (any thickness, size, quality or description) for metal frame including punching or drilling out old glazing pins/spring clips and providing & fixing new one complete all as specified and as directed. |
| 21 | M&L for 4mm thick figured sheet glass, ordinary quality and glazing with oil putty in square n.exc 0.5 sqm in each pane complete all as specified and as directed. |
| 22 | M&L for 3mm thick Figured glass, pin head type and glazing with oil putty in square n. exc. 0.5 sqm in each pane jointed with oil putty complete all as specified and as directed. |
| 23 | S&F for powder coated aluminum louvered ventilators of size n.exc 0.50 Sqm area with glass louvers, without sash bars of aluminium sections weighing not less than 0.605kg/m for frame of size 40x20x2mm including necessary jointing cleats, glazing cleats, rubber packing, anodised aluminium snap beading, scews, anodised aluminium fittings and 4mm thick frosted tinted glass fixed in panels with suitable locking arrangements including taking down of old existing steel ventilator and making good disturbed surface of wall complete all as specified and directed. |
| 24 | M&L for repairs hinges of steel window/ventilators with necessary welding, cutting by gas cutter etc complete all as specified and as directed. |
| 25 | S&F factory made pressed steel windows of standard size and section as shown on HQ CE Siliguri Zone Drg No CESZ/2018/TD-07, Sheet 1/3 to 3/3 with double shutter i.e. glazed & wire gauged shutter including all fittings and fixture like MS hold fast, box hinges, handles, MS tower bolts, stoppers etc complete including one shop coat of anti corrosive zinc chrome primer complete all as specified and as directed.Notes:- (a)Rate quoted shall be deemed to be including of all fittings fixtures . (b)Glass, MS guard bar/grill, wire mesh and painting shall be measured and paid separately under relevant items of this schedule.(c)PCC (1:3:6) type C1 to be filled in chowkats frame and paid under relevant item of this schedule. |
| 26 | All as per Item No 25 above here-in-before but with single shutter of glazed/wire gauged shutter including one shop coat anti-corrosive zinc chrome primer complete all as specified and as directed. |
| 27 | S&F Mild steel framed work such as grills, gratings, guard bar etc with ends of bars shouldered or riveted or for forged into spikes framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe-290. Gde -E- 165 complete all as specified and as directed. |
| 28 | S&F in repair of steel window handles, left/right stove enameled black with nut bolt & washerscomplete all as specified and as directed. |
| 29 | S&F of stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed |
| 30 | S&F in repair of peg stay 300mm long with 3/4 holes stove enameled black suitable for existing steel windows including welding of necessary cleatto existing window nut/bolts complete all as specified and as directed. |
| 31 | M&L for preparation of new or previously untreated steel surfaces any description over 10 Cm in width or girth not otherwise described and applying two coats of synthetic enamel paint complete all as specified and as directed. |
| 32 | Taking down chowkat or frame n.exc 1.5 sqm each with shutters (without taking off shutters from the frames) including building hardwaresetc including removing material from work site complete all as specified and as directed. |
| 33 | Taking down chowkat or frame exc 1.5 sqm but n.exc 4 sqm with shutters (without takingoff shutters from the frame) building hardwares etc including removing material from work site complete all as specified and as directed. |
| 34 | Taking down shutter of any description exc 1.0 Sqm and n.exc 2 Sqm each etc including removing material from work site complete all as specified and as directed. |
| 35 | S&F solid PVC door frame of size 50 X 47mm made out of 5mm thick plain colour PVC sheet reinforced with MS square tube, supplied and fixed in repair in opening as per specifications and drawing complete all as specified and as directed. |
| 36 | M & L for framed work as in doors frame of angle or other section conforming to Fe 410-W (Gde-E- 250)quality-A with gusset plates, rails, braces, etc., and including fixing of steel hinges or other door fittings complete all as specified and directed. (Note:- Door fittings like hinges, tower bolt etc shall be measured and paid separately) |
| 37 | S & F flat iron clamps, hold fasts, wall ties, hooks for hanging fans and other similar small steel article confirming to Fe – 290 Grade – E 165 with and including necessary nut-bolts, washers, screws etc. as required complete all as specified and as directed. |
| 38 | M&L PCC 1:3:6 type C1 using 20m graded agg as in bed block or for embeding of holdfast complete all as specified and as directed. |
| 39 | S&F factory made solid panel PVC door shutters 30mm thick (style) consisting of frame made out of MS tube for top and bottom rail, MS frame shall be covered with heat moulded plain coloured PVC \"C\" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles & plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail & bottom rail; Paneling of plain color PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading, and jointed together with solvent cement, Supplied and Fixedin the frame at site as per specification and drawings complete all as specified and as directed. |
| 40 | S&F 30 mm thick factory made flush shutters, solid core, construction, with block board core and plywood face panels, commercial type on both sides with particle board core complete all as specified and as directed. |
| 41 | S&F Factory made wire gauzed PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C\" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles & plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panel will be of wire gauze. The wire gauze shall be wrapped on an additional square 8mm M.S Solid tube & this tube shall be welded to M.S tubes. The wire gauge shall be stretched to tighten firmly to be fitted in the M.S frame welded/ sealed to the stiles, & rails with suitable PVC sheet beading, & joined together with solvent cement, in the frame at site as per specification & drawing complete all as specified and as directed. |
| 42 | S&F of 100 mm size butt hinges stainless steel with MS hinge pins bright finished complete all as specified and as directed. |
| 43 | S&F 150mm long aluminium anodised tower bolts complete all as specified and as directed. |
| 44 | S&F 150mm size aluminium anodised door handles complete all as specified and as directed. |
| 45 | S&F 300mm long aluminum anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or xtruded section and fixing bolts and sliding of extruded section and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed. |
| 46 | S&Ffor 200mm long MS barrel tower bolts complete all as specified and as directed. |
| 47 | S&Ffor 150mm size MS door handle complete all as specified and as directed. |
| 48 | S&F 150 mm aluminium floor door stopper complete as directed by Engr-in-Charge including taking down old one complete all as specified and as directed. |
| 49 | Material and labour for preparation of untreated new wooden surface of any description over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint, (1st quality) with a coat of pink primer all as specified and as directed. |
| 50 | S & F in repair special pivot of stainless steelsuitable foraluminium door made up of aluminium die cast body complete all as specified and as directed. |
| 51 | S&F in repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed. |
| 52 | S&F in repairs600mm x 450 mm beveled edge mirror of selected quality glass, mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed. |
| 53 | Supply & fixed in repair, Shower rose swivel type brass chromium plated 125 mm size including fixing to steel pipe or unions complete all as specified. |
| 54 | S&F in repair 10 ltr capacity PVC flushing cistern low level white colour including PVC connection 450 mm long, PVC flush pipe of required length etc complete all as specified and as directed |
| 55 | Supply & Fixed in repair of good quality rubber washers for low level flushing cistern complete all as specified and as directed. |
| 56 | S&F in repairs of 600 mm long tubular towel rail 19/20mm dia brass CP complete all as specified and as directed. |
| 57 | Supply & fixed in repair, Pillar taps, fancy type cast copper alloy with capstan heads, chromium plated, screwed down high pressure, with or without letter Hot or Cold with long screwed shanks and fly nuts screwed for 15 mm dia bore of pipe complete all as specified and as directed. |
| 58 | S&Fixed in repair Bib tap 15 mm bore, fancy type Brass CP, fancy type with crutch or butterfly handle screwed down screwed for iron pipe or for brass ferrule and fixed in repair complete all as specified and as directed.. |
| 59 | Supply & fixed in repairs CP Stop cock (ISI Marked), cast copper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 15 mm bore and complete all as specified and as directed. |
| 60 | Supply and fixed in repairs ofVitreous China bowl urinal flat back, size of 465x355x265 mm White ( minimum) including providing and fixing plugs, bedding the urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement and providing grating and union for discharge pipe excluding 32mm bore PVC discharge pipe complete all as specified and as directed. |
| 61 | Supply and fixed in repairsvitreous china wash basin (WHB), white, flat back, size 550 mm x 400 mm (1st quality)including brackets,waste fittings, brass Chromium plated for glazed basins etc. with long screw shanks and fly nuts, flange end embedded in red lead cement, including cutting for and pinning in ends of brackets or erecting stand but excluding providing brackets, waste pipe & CP waste coupling, PVC connection 450 mm long complete all as specified and as directed. |
| 62 | Supply & fixed in repairs PVC connection 15 mm bore with PTMT nuts of length 450 mm long complete all as specified and as directed. |
| 63 | Supply & fixed in repairsGrating dome 100mm dia with waste hole of CP complete all as specified and as directed. |
| 64 | Supply and fixed in repair of110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wallswith necessary clamps including taking down old unserviceable pipe including fittings complete all as specified and as directed . |
| 65 | S&F 110mm dia PVC (SWR) branch piece, single ‘Y‘ equal or unequal complete all as specified and as directed. |
| 66 | Supply and fixed in repairs vitreous China white Squatting pan, \"Orissa\" pattern size 580 mm x 440 mm with integral footrests water closet) with \"P\" or \"S\" trap front or back inlet complete including cement concrete for bedding, connection to drain pipe and to flushing pipe, anti syphonage pipe etc complete all as specified. |
| 67 | Supply & fixed in repairsPVC waste pipe with CP waste coupling including flexible suitable for wash hand basin or urinal, 32 mm dia complete all as specified and as directed. |
| 68 | S&F in repairs fancy type Chromium plated with long shank and cup (concealed type) stop valve cost copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe 15mm bore complete all as specified and as directed. |
| 69 | Takingup or down 15mm bore pipe and connection including cleaning for refixing or removal from site complete all as specified and as directed. |
| 70 | Taking up or down or 20mm steel tubing and connections including cleaning for refixing or removal to store complete all as specified and as directed. |
| 71 | S&F of Tubes, medium grade, 15mm bore, galvanised, with all fittings and fixed complete to wall and ceilings or laid in floors complete all as specified and as directed. |
| 72 | S&F of Tubes, medium grade, 20 mm bore, galvanised, with all fittings and fixed complete to wall and ceilings or laid in floors complete all as specified and as directed. |
| 73 | Taking down cement plaster on wall of any description including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed. |
| 74 | M&L for rendering 10mm thick in CM 1:4 on facia, roof projection, chajja etc finished even & fair w/o using extra cement complete all as specified and as directed. |
| 75 | M&L for Rendering 15mm thick in CM (1:6) on concrete/brick wall surfacesfinished even and smooth without using extra cement complete all as specified and as directed. |
| 76 | M&L for 5mm thick plaster rendering on fair faces of concrete surfaces as in ceiling in CM(1:3) finished even and fair (without using extra cement) complete all as specified and as directed. |
| 77 | M&L for 15 mm thick (10+5mm)plaster in two coatsof cement mortar (1:4) rendering on fair faces of brick work with water proofing compound @200 ml per bagof cement or as per manufacturer\"s instructions finishing the surface even & fairwithout using extra cement complete all as specified and as directed.(NOTE :Water Proofing Compound shall be measured and paid separately under relevant item of this Schedule \"A\") |
| 78 | Supply only liquid water proofing compound complete all as specified and as directed. |
| 79 | M&L for applying two coats of exterior emulsion paint(weather coat) on a new plastered surfaces of facia, roof projection, chajja etc including necessary preparation of surfaces incomplete all as specified and as directed. |
| 80 | M&L for two coats of oil bound distemper on walls over a thick layer of putty on new plastered surfaces of wall including preparation of surfaces complete all as specified and as directed. |
| 81 | M&L for two coats ofoil bound distemper on ceiling over a thick layer of putty on new plastered surfaces of wall including preparation of surfaces complete all as specified and as directed. |
| 82 | M&L for applying two coats of colour wash over one coat of white wash on new plastered surfaces of wall including preparation complete all as specified and as directed. |
| 83 | Supply & Fixing in repair powder coated anodised aluminium door frame (sections weighting not less than 1.40 kg/mtr) made of Square/tubular Aluminium section for door with one or more rebates jointing cleat for fixing etc and provision of aluminium door shutter (Single/Double shutter) including necessary jointing cleats glazing clips, rubber gasket aluminium anodisedsnap beading, screws, hold fast, Aluminium hinges 3Nos 100mm long for each shutter, floor stopper, locking arrangements handle 5.5mm thick tinted glass fixed in panels with aluminium guard bar and all as directed. |
| 84 | S&F in repair powder coated aluminium window sliding type three track (one gauge and two glazed shutter) aluminium sections weighing not less than 0.55 Kg per mtr for shutter and aluminium sections weighing not less than 1.67 Kg per mtr for frame including necessary jointing cleats, glazing cleats, rubber packing, screws, handle, locking arrangement etc complete and 4.00 mm thick tinted glass and stainless steel mosquito proof gauge complete all as specified and as directed. |
| 85 | S&F in repair double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and as directed. |
| 86 | S&F in repair 5.5mm thick tinted glass, fixed with existing snap beading, rubber gasket etc. area of each pane exc. 0.50 sqm complete all as specified and as directed. |
| 87 | S&F in repair door closer hydraulically regulated, designation No-3 universal type, aluminium (extruded section body), suitable for door shutter of 851to 1000mm in width and weight between61 to 80 Kg and fixed complete all as specified and as directed. |
| 88 | Demolition of brickwork built in cement mortar including all quoins, arches, pillars etc complete all as specified and as directed. |
| 89 | M&L brickwork with fly ash bricks straight or curved on plan exc 6 mtr mean radius built in cement mortar 1:6 by using old size bricks complete all as specified and as directed. |
| 90 | M&L brick work with fly ash\" bricks, straight or curved on plan to any radius in half brick thick wall built in CM 1:4 complete all as specified and as directed. |
| 91 | S&F in repair for CP health faucet 1.00m long CP pipecomplete all as specified and as directed. |
| 92 | S&F in repair CP Jet spray with 1.0 mtr tube and complete all as specified and as directed. |
| 93 | S&F in repair plastic seat cover white with recessed bottom with PVC hinging device complete all as specified and as directed. |
| 94 | Disconnecting existing water tanks and setting aside exceeding 500 ltrs and n. exc 1000 ltrs and Refixing the same in the same place after carrying out roof treatment complete all as specified and as directed. . |
| 95 | Taking down existing tarfelt including tiles, lime concrete & screed bed complete from roof surfaces including parapets and lowering and removing the same to a distance exc. 50m and n. exc.100m including roughening ofold concrete surface of roofby wire brushing and cleaning the surface to remove all loose dust etc complete all as specified and as directed. |
| 96 | M&L for 15mm thick screed bed or bedding layers in cement mortar (1:4) in order to maintain proper slope over existing roof surfaces finished even and smooth without using extra cement complete all as specified and as directed. |
| 97 | M&L for providing and applying single component acrylic polymer modified, fibre reinforced waterproof coating in 4 coats of application:-(a) Applying primer coat with Primer @ 0.3 kg /sqm or as per manufacturer\"s instructions. (b) Over priming coat applying waterproofing coat as permanufacturer instructionswith fibre reinforcement@ 0.75kg/sqm on the flat or verticalsurfaces over parapet wall and ensure that there are no bubbles of creases. Overlapping of the fibre is a minimum of 50mm and allow this coat to dry for a period of 2-6 hrs depending on the atmospheric condition. (c) Applying second coat of waterproofing coat @0.75Kg/sqm or as per manufacturer\"s instructions.(d) Applying final coat ofprimer @ 0.08kg/sqm after 2nd coat has dried properly.(Note : Water Proofing treatment shall be carried out by authorised applicator approved by the manufacturer.) |
| 98 | S&F in repair Solid PVC Wall Lining consisting of 5mm thick single side prelam wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame including 5mm thick PVC sheet fillet of width 35mm as per specifications and drawing complete all as specified and as directed. |
| 99 | M&L5mm thickPVC sheet fillet of width 35mm as per specifications and drawing complete all as specified and as directed. |
| 100 | Dismantling water tank exc 500 & n.exc 1000 ltr capacityand removing to store complete all as specified and as directed. |
| 101 | S&F 1000 ltrs multi layered rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) including connecting up pipes securing access covers etc complete all as specified and as directed. |
| 102 | S&F 20mm dia PVC ball cock (PVC floatvalves) complete high pressure with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed as required to use reducer and check nut complete all as specified and as directed. |
| 103 | S&F in repair 20mm dia PVC ball cock (PVC floatvalves) complete high pressure with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed as required to use reducer and check nut complete all as specified and as directed. |
| 104 | Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and as directed. |
| 105 | S&F forPre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 106 | S&F for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour aving tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 107 | Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specified and as directed. |
| 108 | S&F rolled mild steel work of hollow section (tubular/square/rectangular) in trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S 1161-1979 grade St.-240 complete all as specified and as directed. |
| 109 | INTERNAL ELECRIFICATIONTaking down existing unserviceable point wiring of any description/type/ size of light/fan/tube/power/two way/bell etc on TW batten/conduit includingremovalof batten/ conduit/ gutties/ wooden boards/ switches/ sockets/ regulators/ light fittings etc and separating the serviceable items like fan regulators and light fittings for re-use under respective items and removal of unserviceable material out of site and making good the disturbed surfaces of wall/ceiling so as to match with the existing finishes complete all as specified and as directed. |
| 110 | Taking down the existing unserviceable main switch/ cut out/ DBs of any type/ capacity/ description as existing at site including making good the disturbed surfaces to match with the existing finishes complete all as specified and as directed. |
| 111 | Taking down the existing unserviceable sub main wiring of any type / description as existing at site including making good the disturbed surfaces to match with the existing finishes complete all as specified and as directed. |
| 112 | M&L for concealed conduit point wiring with 1.5 Sqmm (nominal cross-sectional area) PVC insulated unsheathed single core copper cable working voltage 1100 volts grade conforming to IS-694 with stranded copper conductor in and including PVC conduit of adequate size with allaccessories (including cutting chases & making good the disturbed surface to its original specification) including MS sunk box, 3mm thick hylum sheet top cover fixed by means of brass machine screw and cap washer including size 1.5 sq mm (nominal cross sectional area) PVC insulated unsheathed single core multistranded copper conductor cable as earth continuity conductor connected to main switches/DB\"s or common earth dolly for one light point controlled by one, one way switch complete all as specified and as directed. |
| 113 | Description all as per item No 112 abovehere in before butfor one Ceiling Fan / exhaust fan point controlled by one, one way switch and regulator complete all as specified and as directed. |
| 114 | Description all as per item No 112 abovehere in before but for one 3 point 5 Amps switch socket outlet point controlled by one switch on the same board complete all as specified and as directed.. |
| 115 | Description all as per item No 112above here in before butfor one 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board complete all as specified and as directed. . |
| 116 | Description all as per item No 112 abovehere in before but for one bell point controlled by one, bell switch 5 Amps complete all as specified and as directed. |
| 117 | Description all as per item No 112here in before butusing 2.5 sq mm single core copper conductor cable of multistranded flame retardant PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket combination point including running of2.5 sq mm copper conductor flame retardant PVC wire as earth continuity conductor along with wiring and connecting to the common earth dolly complete all as specified and as directed. |
| 118 | S & F switch piano single pole flush type 5 amps, 230 volts. complete all as specified and as directed. |
| 119 | S & F bell push flush type 5 amps, 230 volts. complete all as specified and as directed. |
| 120 | S & Fswitch socket combination flush type multipurpose 2/3 pin 5 amps 2 in 1230 Volts complete all as specified and as directed. |
| 121 | S & F switch socket combination flush type multipurpose 2/3 pin 15 amps 2 in 1230 Volts complete all as specified and as directed. |
| 122 | S & Fswitch socket combination 2 in 1 multipurpose 3/5 pin5/15 amps flush type complete all as specified and as directed. |
| 123 | S & F ceiling rose three terminal surface bakelite type AC 50 Hz 230 volts of size 65 x 50 mm complete all as specified and as directed. |
| 124 | S & F ceiling fan regulator step type, flush type heavy duty suitable to work on 230 volts Ac supply complete all as specified and as directed. |
| 125 | S & F lamp holder insulated body surface bakelite with back plate suitable for angle / batten fittings fixed with PVC round/square blocks complete all as specified and as directed. |
| 126 | S & F in repairswitch piano single pole flush type 5 amps, 230 volts including removal of old existing unserviceable one complete all as specified and as directed. |
| 127 | S & Fin repair switch socket combination flush type multipurpose 2/3 pin 5 amps 2 in 1230 Voltsincluding removal of old existing unserviceable onecomplete all as specified and as directed. |
| 128 | S & F in repair switch socket combination flush type multipurpose 2/3 pin 15 amps 2 in 1230 Voltsincluding removal of old existing unserviceable one complete all as specified and as directed. |
| 129 | S & Fin repair switch socket combination 2 in 1 multipurpose 3/5 pin5/15 amps flush type including removal of old existing unserviceable one complete all as specified and as directed. |
| 130 | S & Fin repair ceiling rose three terminal surface bakelite type AC 50 Hz 230 volts of size 65 x 50 mmincluding removal of old existing unserviceable one complete all as specified and as directed. |
| 131 | S & Fin repair ceiling fan regulator step type, flush type heavy duty suitable to work on 230 volts Ac supplyincluding removal of old existing unserviceable onecomplete all as specified and as directed. |
| 132 | S & Fin repair lamp holder insulated body surface bakelite with back plate suitable for angle / batten fittings fixed with PVC round/square blocks including removal of old existing unserviceable onecomplete all as specified and directed. |
| 133 | S&F in repair call bell suitable to work on 230 volts AC supply including removal of old existing unserviceable one complete all as specified and directed. |
| 134 | S & F LED Lamp 9/10 Watt with B 22 base complete all as specified and as directed. |
| 135 | S&FLED white glass Lamp 1x20 Watt 230V Base-22 complete all as specified and directed. |
| 136 | Supply & fix sheet metal enclosure for8 way Distribution Boards (DB’s), double door , single pole and neutral with 200 amps rated bus bar, including bus bar neutral link, earth bar and din rail, IP-43, IK-09 protection including gasket and door earthing suitable for fixing MCBs/isolators fixed on wall surface and making good the disturbed surfaces of wall and connecting up complete all as specified and as directed. |
| 137 | Supply & fix sheet metal enclosure for4 way Distribution Boards (DB’s), double door , Triple pole and neutral with 200 amps rated bus bar, including bus bar neutral link, earth bar and din rail, IP-43, IK-09 protection including gasket and door earthing suitable for fixing MCBs/isolators fixed on wall surface and making good the disturbed surfaces of wall and connecting up complete all as specified and as directed. |
| 138 | Supply and fixed MCB TPN 40 to 63 Amps, \"C\" series 10kA, 415 Volts and to be housed in DBscomplete including necessary connectionall as specified and as directed. |
| 139 | Supply and fixed MCB SPN, 6 to 32 Amps, \"C\" series 10kA, 240 Volts and to be housed in DBs including necessary connection complete all as specified and asdirected. |
| 140 | Supply and fixedMCB SP, 6 to 32 Amps, \"C\" series 10kA, 240 Volts and to be housed in DBs including necessary connection complete all as specified and as directed. |
| 141 | M&L for sub main wiring with 2 run of 6.00 sqmm (nominal cross-sectional area)PVC insulated unsheathed single core FRLS cable of working voltage 1100 volts gradewith stranded copper conductor includingone run of 6.00 Sqmm (nominal cross sectional area) PVC insulated unsheathed cable with stranded copper conductor as continuous earth wire connected to common earth dolly drawn in 25mm dia PVC rigid non- metallic conduit withcomplete all as specified and as directed. (Note : Two runs of sub main wiring cable along with one run of earth wire with and includingPVC conduit pipe shall be measured as one unit length). |
| 142 | All as per item No 141 above but usingtwo run 4.0 Sqmm multistranded copper conductor single core cable with one run 4.00 sqmm multistranded copper conductor single core cable as earth wire complete all as specified and as directed. |
| 143 | S&F Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB, 20 Amps, 240 Volts, including necessary connection including taking down old one complete all as specified and as directed. |
| 144 | S&F IP 20, class I, LED light 1X18 W (or nearest next higher wattage) (4feet), 5700K, wall/ surface mounted, integrated type with aluminium housing and decorative and caps with integrated high efficiency electronic driver and surge suppressor of 2KV or more, luminaire efficiency > 95 lumens/watt, power factor > 0.90, operating range - 140 to 270 V, 50 Hz fixed with 02 Nos of PVC round/ square blocks, screws etc complete with all accessories internally prewired and connecting up with and including necessary taking down the old unserviceable fitting complete all as specified and as directed. |
| 145 | S&F IP 20, Class I, LED Mirror light fitting 1 x 10 W, (or nearest next higher wattage) 5700 K, wall /Surface mounted with aluminium housing 2 feet long, integrated type, with high efficiency PMMA diffuser,integrated high efficiency electronic driver & surge suppressor of 2 KV or more, luminaire efficacy > 95 lumens/Watt, power factor >/ 0.90, operating range – 140 to 270 V, 50 Hz fixed with 02 Nos of PVC round/square blocks, screws etc complete including 01 No 10 W LED lamp with all accessories internally prewired and including connecting up with and including twin core twisted flexible copper conductor cable of suitable size including necessary taking down the old unserviceable fitting complete all as specified and as directed. |
| 146 | M&L for Energy saving new generation environmental friendly long life versatile pressure die cast aluminium IP 66 Security light fitting luminaire with high power LEDs as light source and driver of capacity 25 watts withpre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor cabe from ceiling rose to fitting and GI Pipe bracket made out of GI pipe medium grade 1.2 Mtr long 32 mm dia , MS clamp, nut, bolt and washers complete all as specified and as directed. |
| 147 | S&F of bulk head luminaire with B22 base holder suitable for 9 WattLED inverter type bulblight IP66 grade,with and including 9 watt LED (or nearest next higher wattage) lamp (LED Bulb with B22 base 900 Lumens in normal mode and 450 lumens in power back up mode, charging time 8-10 Hrs and around 4 Hrs Power backup with inbuilt surge protection of 3 KV) (or nearest next higher wattage) and connecting up with and including PVC insulated3 core of size 0.75 Sqmm copper conductor from ceiling rose to terminal block of light fitting including necessary taking down the old unserviceable fitting complete all as specified and as directed. |
| 148 | S & F post top lanterns 15 watt LED light fitting ,new generation, energy saving, environmental friendly, long life with symmetrical light distribution, spun aluminium landscape luminaries with high power LEDs as light source, spun aluminium canopy, with opal/clear acrylic diffuser and complete with all accessories internally prewired including connecting up with three core twisted flexible copper conductor cable up to ceiling rose and necessary mounting arrangements including taking down the old unserviceable fitting complete all as specified and as directed. |
| 149 | S&F in repairhylam sheet 3 mm thick white in colour of size 130 mm x 180 mm including taking down existing unserviceable complete all as specified and as directed. |
| 150 | S&F in repair hylam sheet 3 mm thick white in colour of size 120 mm x 170 mm including taking down existing unserviceable complete all as specified and as directed. |
| 151 | S&F in repair hylam sheet 3 mm thick white in colour of size 230 mm x 280 mm including taking down existing unserviceable complete all as specified and as directed. |
| 152 | S&F in repair hylam sheet 3 mm thick white in colour round type of size 80 mm dia including taking down existing unserviceable complete all as specified and as directed. |
AI Tender Summary
Tender Timeline
Jul 27, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedAug 10, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedAug 12, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender