Tender For Construction Of Gate-0 To Incorporate Unique Visual Aura And Modern Look As Per Standard Design At Gopanari Bp
Tender Value
49.92 Lakhs
Estimated cost
Bid Submission
04 Aug 2023
0 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Tinsukia → Assam
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Gate-0 To Incorporate Unique Visual Aura And Modern Look As Per Standard Design At Gopanari Bp => Limited
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. |
| 2 | All kinds of soil |
| 3 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m. |
| 4 | Supplying and filling in plinth with sand of Zone -04 under floors, including watering, ramming consolidating and dressing complete. |
| 5 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level: |
| 6 | 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 7 | 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 8 | Centering and shuttering including strutting, propping etc. and removal of form for : |
| 9 | Foundations, footings, bases of columns, etc. for mass concrete |
| 10 | Lintels, beams, plinth beams, girders, bressumers and cantilevers |
| 11 | Columns, Pillars, Piers, Abutments, Posts and Struts |
| 12 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level |
| 13 | Thermo-Mechanically Treated bars |
| 14 | Providing and laying in position machine batched and machine mixed design mix M-25 grade cementconcrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per directionof Engineer-in-charge.Note:- Cement content considered in this item is @ 330 kg/ cum. Excess or less cement used as per design mix is payable or recoverable separately. |
| 15 | All work upto plinth level |
| 16 | All work above plinth level upto floor V level |
| 17 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in : |
| 18 | Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 19 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : |
| 20 | Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 21 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. |
| 22 | Area of slab over 0.50 sqm |
| 23 | Providing edge moulding to 18 mm thick marble stone counters, vanities etc., including machinepolishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. |
| 24 | Granite work |
| 25 | Steel work welded in built up sections / framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. |
| 26 | In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works |
| 27 | Design, Detailed enginnering, Supply, fabrication, Erection, painting, lettering, commissioing of MS Electric Motorized gate with Weatherproof Motor with canopy, control unit with canopy, mannual override mechanism, guide, railing arrangement, Manual Switch, locking arrangement, remote control, proper gearing system, manual handle, Lettering, Logo along with all necessary accessories to commissioing the gate in all respect as per tender attached drawing including Surface preparation by blasting conforming to swedish standard SA 2 1/2 for painting,supply and application of 1st coat of inorganic zinc silicate 75 microns DFT, 2nd coat of intermidiate of epoxy high build micaceousiron oxide (MIO) 120 microns DFT, 3rd coat finishing paint of acrylic polyurethane 40 microns DFT, and 4th coat finishing paint of acrylic polyurethane 40 microns DFT (total DFT = 275 microns minimum) of approved colour. finishing coat shall be applied one before erection and one coat after erection, including loading, transportation, unloading delivery at erction siteof all fabricated structures, storage and handling at site, site assembly and finally erction of structures at appropriate location, alignment and welding of all structures true to line level, plumb and dimension. the work shall be completed as per drawings, technical specifications and direction of E.I.C, Note: the cost of MS bolts and nuts (permanent and service), washers,electrodes, putty, gases, shims, packs, cost of straightening the raw materials. Built up section at any shape cutting of flats from plates and providing splices, paints, tools, plants testing of materials etc. and all others related to work is included in this items. All jobs shall be done as per direction of E.I.C. Drawings provided along with the tender documents are to be used only as reference. The successful bidder shall submit complete structural & construction drawings to get it reviewed/approved by owner/ consultant in detail before taking up any fabrication / manufacturing activity.UPS / Power supply will be provided by Plant. |
| 28 | 12 mm cement plaster of mix: 1:6 (1 cement : 6 coarse sand) |
| 29 | 15 mm cement plaster on rough side of single or half brick wall of mix: |
| 30 | Finishing walls with textured exterior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/ 10 sqm) over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm |
| 31 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade:Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. |
| 32 | Supply and fixing of aluminium composite panels (ACP Sheet)-3mm thk, along with supply and fixing of (40mm X 25mm or as required) thick hollow aluminium tubular section as required and filling of grooves with Alstone 600or equivalent 100% weatherproof sealant. |
| 33 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. |
| 34 | Supply and fixing of MS Hollow Section tube as required: finished with Nerolac make primer. |
| 35 | Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length (total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron \"X\" shaped placed 3.00 m apart and with 5 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in-charge, with reinforced barbed tape(R.B.T.) /Spring core (2.5mm thick) wire of high tensile strength of 165 kg/sq.mm with tape (0.52 mm thick) and weight 43.478 gm/ metre (cost of M.S. angle, C.C. blocks shall be paid separately)Dismantling, Demolishing and Relaying ItemsDemolishing any ratio cement concrete manually/ by mechanical means including disposal of material outside premises at unobjectionable and as per direction of Engineer -in - charge.Demolishing R.C.C. workmanually/ by mechanicalmeans including stacking of steel bars & disposal of unserviceable material outside site at unobjectionable place& as per direction of Engineer-in-chargeDemolishing brick work manually/mechanical means including stacking of serviceable material & disposal of unserviceable material outside site at unobjectionable place & as/direction of Engineer-in-charge.Demolishing stonemasonry manually/ by mechanicalmeans including stacking serviceable material & isposal of unserviceable material out of site at unobjectionable place and as per direction of Engineer-in-charge:Dismantling Steel work in build up sections in angles, tees, flats channels etc. including all gusset plates, bolts nuts, cutting rivets welding etc. including dismembering and stacking within premises |
| 36 | Dismantling, Demolishing and Relaying Items |
| 37 | Demolishing any ratio cement concrete manually/ by mechanical means including disposal of material outside premises at unobjectionable and as per direction of Engineer -in - charge. |
| 38 | Demolishing R.C.C. workmanually/ by mechanicalmeans including stacking of steel bars & disposal of unserviceable material outside site at unobjectionable place& as per direction of Engineer-in-charge |
| 39 | Demolishing brick work manually/mechanical means including stacking of serviceable material & disposal of unserviceable material outside site at unobjectionable place & as/direction of Engineer-in-charge. |
| 40 | Demolishing stonemasonry manually/ by mechanicalmeans including stacking serviceable material & isposal of unserviceable material out of site at unobjectionable place and as per direction of Engineer-in-charge: |
| 41 | Dismantling Steel work in build up sections in angles, tees, flats channels etc. including all gusset plates, bolts nuts, cutting rivets welding etc. including dismembering and stacking within premises |
| 42 | Demolishing dry brick pitching in floors, drains etc. including stacking serviceable material and disposal of unserviceable material within premises |
| 43 | Dismantling roofing including ridges, hips valleys and gutters, false ceiling of any type etc.,and stacking the material within premises, of: Dismantling roofing G.S. Sheet/ Klippon galvalume sheets/False ceiling panels and stacking as directed by Engineer in charge. |
| 44 | Dismantling roofing Asbestos sheet and stacking at desired place as directed by Engineer in charge |
| 45 | Dismantling precast concrete or stone slabs in walls, partition walls etc. including stacking within premises: Thickness up to 40 mm |
| 46 | Dismantling precast concrete or stone slabs in walls, partition walls etc. including stacking within premises: Thickness above 40 mm up to 75 mm |
| 47 | Dismantling manually/bymechanical means including stacking of serviceable material & disposal of unserviceable material outside site at unobjectionable place & as per direction of Engineer-in-charge : Bituminous road including WBM |
| 48 | Taking out existing CC interlocking paver blocks from footpath central verge, including removal of rubbish etc., disposal of unserviceable material out of site at unobjectionable place & stacking serviceable material within plant primeses as per direction of Engineer - in-Charge |
| 49 | Laying Corporation supplied interlocking paver blocks of any design /shape laid in required line,level,curvature,colour & pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as/ direction of Engineer-in-charge. |
AI Tender Summary
Tender Timeline
Jul 27, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedAug 04, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedAug 05, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender