Road And Building Department-RBD has published Tender For Construction Of Storage Cum Biomedical Waste Management Equipment Room At Chc Belpada Under Khaprakhol Block For The Year 2022-23. Submission Date for this Tender is 02-08-2023. Waste recycling plant Tenders in kantabanji Odisha. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Earth work in hard soils with all leads and lifts including rough dressing and breaking cloods to maximum 5 cm to 7 cm and laying in layers not exceeding 0.3m (1 ft) in depth including all labour with T & P & cost royality and as per diretion of the Engineer-in-charge. |
| 2 | Supplying & Filling foundation trenches , plinth & ditches withclean course river sand well watered and rammed inlayers not exceeding23 c.m.indepthwith all lead and lift including cost, conveyance, loading, unloading, stacking,royalties and alltaxes of sand,cost & conveyance of water, cost of all Labour,labour ess,T&P required for the work etc. complete in all respect as directed by the Engineer- in -charge. |
| 3 | Providing and laying plain cement concrete of M-15 proportion (1:3:6) in foundation and floors using 12mm. size black hard crusher broken granite stone metal and screened and washed sharp sand for mortar of approved quality and from approved quarry including hoisting, lowering, laying concrete, ramming, watering and curing etc. complete including cost, conveyance, royalties and cost of all labours,labour cess, T&P etc complete as per specification & direction of the Engineer-in-charge. |
| 4 | Providing lifting, hoisting and laying R.C.C. of M-20 Grade to base of columns and footing, columns, beams, plinth band, lintels, chajja, shaft, fins, roof slabs, balconies, stair cases, parapets, window sills, lofts, railing, jally, copping or in places as shown in the drawing for all floors with 20mm and down graded size black hard crusher broken ships of approved quality from approved quarry including mixing and vibro compacting to proper shape and size, level and plumbs and finishing the exposed surfaces smooth (if required providing plaster with cement mortar (1:4) wherever necessary without any extra cost) including rigid smooth centering and shuttering, scafolding, watering (excluding reinforcement bars) and curing for required period including cost of all material, labour, conveyance, royality, loading and unloading, sundries, tools and plants etc. complete as per the direction of the Engineer in Charge. (A) Column Base & Footing |
| 5 | (B) Column |
| 6 | (C) Plinth Bend |
| 7 | (D) Lintel |
| 8 | (E) Slab |
| 9 | (F) Wall Beam |
| 10 | (G) Chajja |
| 11 | Providing fitting and fixing in position R.C.C. (1:2:4) precast slab using 12mm size black hard granite crusher broken chips and 75 Kg. of steel inforcement per cum including cost of all materials, labour and T&P and fixing in proper position as per direction of Engineer-in-charge. |
| 12 | Fly ash Brick masonry work in cm (1:6) in foundation & plinthusing fly ash bricks (25cmx12cmx8cm) having minimum crushing strength not less than 35 kg /cm2 with dimesional tolerance + 8 %after immersing the bricks for six hour in water before use in F&P and S/S including splays cutting & circular mouilding, hoisting,, watering, curing etc with cost of all labour T&P for the work in all respect as per the direction of Engineer in-charge. Cost and conveyance of all materials labours all taxes T&P etc all complete. |
| 13 | Fly Ash brick masonry in cement mortar (1:6) in Superstructure using Fly Ash bricks of 25 x 12 x 8 cm size having a crushing strength of not less than 75 kg./sqcm with dimensional tolerance ± 2% including splays cutting circular moulding chamfering and corbelling and similar such type of works with all necessary projections watering and curing after immersing the bricks in water at least for six hours before use including cost, conveyance, royaltieswith all labour,labour cess and T & P required for the work complete in all respect as per specification and direction of Engineer-in-Charge. |
| 14 | Supplying,cutting ,straightening of steel HYSD (Fe- 415) conforming to (IS- 1786) withbending, binding, cranking, hooking, welding or jointing if necessary & tying the grills and placing in positionas required for the Rod work in all floors and & for providing fan hooks hosting lowering ,& laying steels including cost conveyance ,taxes & royalties of allmaterials and binding wires of 18 to 20 gauge & cost of all labourT&P required for the work etc. Complete in all respect as per the direction of Engineer in charges ( payment will be made on weight of MS rod or tor steel only basing on the co- efficient of MS rod or tor steel bars approvedby SAIL/ TATA/competent authority and (Noseparate payment will be made towards the cost of binding wires over lapping, wastage, coupling, welded, joints , spacer bars, ,chairs stays, hangers and annealed steel wires or other methods for binding and placing etc.) |
| 15 | Supplyingfitting and fixng in all floor M.S. Grills, M.S. Doors, M.S. Gate etc. as per approved drawing and design including making holes in walls and R.C.C. structures, wood works etc. and making good the dameges to walls with cement concrete (1:2:4) with black hard crusher broken granite chips of 12mm size complete in all respect including cost of materials labour etc. required form the work complete. |
| 16 | 12mm (1/2 ") thick cement plaster (1:6) in finished smooth to outside smooth surface of brick walls after racking out jointsincluding watering and curring etc. complete with cost conveyance royalty and taxes of all materials and cost of all materials and cost of all with T & P required for the work complete. |
| 17 | 16mm (5/8 ")thick cement plaster (1:8) in finishingsmooth to inside rough surface of 10" thick brick walls after racking out the jointsincluding watering and curring, with cost conveyance royalty and cost of all labourT & P required for the work etc. complete. |
| 18 | 20mm thick cement plaster in cement mortar (1:4)grading plaster in top of roof slab on R.C.C. surface finished smooth with close deep chipping including cost conveyance royalties and taxes of all materials and cost of alllabour,with T & P required for the work etc. complete. |
| 19 | Painting three coats with approved Enamel paint on Steel surface over a coat of Red Oxide Primer including sand papering, polishing the surface including cost conveyance taxes and royaltiesof all materials and with T & P required for the work including cost of paints and primer complete in all respect as per direction of Engg-in-charge. |
| 20 | Wall painting two coats with any approved colour of weather seal coat of over a coat of Water Bound Wall Cement Primer to out side surface of all by means of brush including watering and curing etc. complete including cost of paint with taxes and cost of all labour with T & P required for the work etc. complete. |
| 21 | Wall painting two coats with approved emulsion paint over a coat of Water Bound Wall cement Primer on plastered surface by means of brush including watering and curing etc. complete including cost of paint with taxes and cost of all labour with T & P required for the work etc. complete. |
| 22 | 2.5cm (1") a.v thick A.S. Flooring with cement concrete of prop( 1:2:4) with black hard crusher broken gramite chips laid in two layers the bottom layer being 1/2" thick with 1/2" size black hard crusher broken granite chips and the top layer being 1/2"thick with 1/2" size black hard crusher broken granite chips laid over 4" thick base course in ground floor and after chipping and chiselling the top of floor slabs in upper floors laid to proper slope including rounding of corners watering and curing with cost conveyance royalties and taxes of all materials and cost of all labour T & P required for the work etc. complete in all floors. |
| 23 | Cement concrete of proportion (1:2:4) using 12mm (1/2 ") size hard granite crusher broken chips of approved quality from approved quarry andincluding lowering laying concrete watering and curing etc. complete to the required levels laid in layers not exceeding 15cm. thick including cost and conveyance, royalities and taxes of all materials and cost of all labour with T&P required for the work complete. |
| 24 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes conforming to IS:15778, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. (i) 20mm dia PVC ASTM pipe (sch-80) |
| 25 | (ii) 25mm dia PVC ASTM pipe (sch-80) |
| 26 | Supplying all materials, labour T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all joiniting materialsincluding cost & conveyance of all materials to worksite, payment oftaxes etc. allcomplete as per P.H specification and direction of the Engineer-in-charge. (i) 15mm dia CP angle stop cock (Con-CHR-053KN Jaquar make) |
| 27 | (ii) 15mm dia CP Long Body Bib cock (Con-CHR-107KN Jaquar make) |
| 28 | (iii) 125mm CP grating |
| 29 | Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer"s specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches , cost & conveyance of all materials to worksite, payment oftaxes etc.all complete as per P.H specification and direction of the Engineer-in-charge. (i) 110mm U-PVC SWR Pipe (Ori Plast / Finolex / Supreme Make Type-B) |
| 30 | (ii) 110mm U-PVC door bend (Ori Plast / Finolex / Supreme Make) |
| 31 | (iii) 110mm U-PVC Plain bend (Ori Plast / Finolex / Supreme Make) |
| 32 | (iv) 110mm U-PVC Plain tee (Ori Plast / Finolex / Supreme Make) |
| 33 | (v) 110mm U-PVC Socket (Ori Plast / Finolex / Supreme Make) |
| 34 | Supplying all materials, labour T&P and fixing wash basins with hole for pillar taps with cast iron or M.S.brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered "Hot" and "Cold" with long screws, shanks and back nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste, cost & conveyance of all materials to worksite, payment oftaxes etc. all complete as perP.H specification and direction of the Engineer-in-charge. (i) 550mm x 400mm W.H.basin (Hindware / Parryware / Neycer make) with 15mm dia C.P.pillar cock (Plaza make) with pedestal |
| 35 | Supplying all materials labour T&P and constructing 1.20m dia x 2.00 m deep soak way pit with dry brick having crossing strength not less than 75Kg/CM2 to 99Kg/CM2 in CM(1:6) for the remaining 0.4572mm height of wall at top CC(1:3)inside and outside inside fill with dry brick khoa size 38mm ,CM thick RCC perforated slab to a height of 1.9012m from bottom covered by means of 50mmthick RCC wall cover in pieces filled with iron plugs including earth work in excavation refilling of cavity around the pit and painting the iron works complete as per PHD design and specification including carriage of all materials to site. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
