Tender For Improvement Of Internal Streets And Side Drain Near Takiya Pond At Village Mundka In Mundka Ac-08 In Distt. West.
Tender Value
4.83 Crore
Estimated cost
Bid Submission
02 Aug 2023
0 days left
EMD
9.66 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
mundka → Delhi
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Improvement Of Internal Streets And Side Drain Near Takiya Pond At Village Mundka In Mundka Ac-08 In Distt. West.
BOQ
| Sl. No. | Item Description |
| 1 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar |
| 2 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) |
| 3 | Excavation of silt including malba, earth debries, rubbish ploythene bed all floating material etc. from the bed of drain and disposal of excavated material at own source of contractor by mechanical transport with all lead and all lift complete as per directions of engineer-in-charge. |
| 4 | Supplying of building rubbish/malba by mechanical transport upto a lead of 5.00 Km including royality, loading, unloading, stacking at site and banking the same in layers not exceeding 20cm in depth, breaking clods, rolling each layer with 1/2 tonne roller on wooden or steel rammer and rolling every 3rd and top most layer with power roller of minimum 8 tonne and dressing up in embankments for road, flood bank and guide bank or filling up ground depression all lead up and all lift. all kinds of soil. |
| 5 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 6 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations and plinth in : cement mortar 1:4 (1 cement : 4 coarse sand) |
| 7 | 12 mm cement plaster of mix : 1:4 (1 cement: 4 coarse sand) Neat cement punning. |
| 8 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate. |
| 9 | Providing and laying cement concrete pavement of M-10 with ready mixed concrete from batching plant of reputed cement manufacture and transported to the site of work in transit mixer having continuous agitated mixer, manufacture as per mixed design of M-10 grade of cement concrete work including pumping of RMC from transit mixer to site. Placing in required camber compulsory with plate/screed vibrator with wire brush etc. and curing including cost admixer in recommended proportions as per IS:9103 to accelerate/retard setting of concrete, improve workabilty witthout impairing strength and durabiltity as per specification and direction of Engineer-in-Charge. Note-1) less cement used than specified in this item is recoverable seprately.M-10 Grade plain cement concrete by using 220 kg of cement per cum of concrete. |
| 10 | Providing and laying RMC of M-30 grade By using 400kg of cement (43 grade. OPC) per Cum of concretein roads/streets manufactured in automatic RMC plant using coarse sand and graded stone aggregate of 20mm nominal size in appropriate proportion as per approved design criteria including transportation to site in transit mixer, including cost of admixture in recommended proportion as per IS9103 to accelerate/ retard setting of concrete to improve workability without impairing strength and durability as per specification including spreading and compacting mechanically by using needle and surface vibrators, leveling to required slope & camber, finishing by floating & brooming with wire brushes etc. and curing including making provision for contraction /expansion, construction of cross/ longitudinal joints of size 10mm wide 50 mm deep by groove cutting machine, providing and filling joints with approved joint filler and sealants, etc. complete, as per direction of Engineer-charge (Cost of joint filler & sealants shall be paid for separately under relevant items) |
| 11 | Providing and laying in position bitumen hot sealing compound for expansion joints etc Using grade ‘A’ sealing compound. |
| 12 | Providing and fixing in cement mortar 1:6 (1cement : 6 fine sand) red sand stone slabs 30mm thick over drains to acts as shuttering complete as per direction of Engineer in charge. |
| 13 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size). |
| 14 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. |
AI Tender Summary
Tender Timeline
Jul 26, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedAug 02, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedAug 02, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender