Tender For Mtc. Of Auditorium Of Sabroom Mmd College, Including Internal Water Supply, And Sanitary Installation Etc. During The Year 2023-24. Sh. Earth Work, Pcc Work, Flooring, Ceiling Etc.
Tender Value
24.25 Lakhs
Estimated cost
Bid Submission
09 Aug 2023
0 days left
EMD
48513
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
sabroom → Tripura
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Mtc. Of Auditorium Of Sabroom Mmd College, Including Internal Water Supply, And Sanitary Installation Etc. During The Year 2023-24. Sh. Earth Work, Pcc Work, Flooring, Ceiling Etc.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead Of area 3 sqm and below. |
| 2 | Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door |
| 3 | Demolishing cement concrete manually / by mechanical means including disposal of material with all lifts and upto 50 m lead etc. complete as per direction of the Engineer- in-charge:1). Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) |
| 4 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sqm and under including cutting the patch in proper shape and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground with all leads and lifts including finishing even and smooth and curing complete as per direction of the Engineer in charge:-a) With cement mortar 1:4 ( 1 cement : 4 fine sand ). |
| 5 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade [Payment shall be made after submission of Test Certificate issued by the Manufacturer] :a)New work ( two or more coats) over and including water thinnable priming coat with cement primer. |
| 6 | Distempering with oil bound washable distemper of approved brand and manufacture and of requiredshade on old work ( one or more coats ), to give an even shade as required complete as per direction of the Engineer in charge. |
| 7 | Applying one coat of water thinnable cement primer of approved brand and manufacturer on wall surface complete.Water thinnable cement primer |
| 8 | Finishing walls with water proofing cement paint of required shade of approved brand and manufacture[Payment shall be made after submission of Test Certificate issued by the Manufacturer] :a)New work ( two or more coats applied @ 3.84 kg/10 sqm) |
| 9 | Finishing walls with water proofing cement paint of required shade of approved brand and manufacture on oldwork ( one or more coats ) including preparation of surface as required complete as per direction of the Engineer in charge. |
| 10 | Providing and fixing 25 mm thick wooden planking, tongued and grooved in floors including fixing with iron screws complete. With teak wood local |
| 11 | Providing wood work in frames of false ceiling, partitions etc. sawn and put up in position :a) Karai wood. |
| 12 | Providing and fixing IS : 1341 marked M.S. heavy weight butt hinges with necessary screws etc. complete :a) 125 × 90 × 4.00 mm. |
| 13 | Providing and fixing ISI marked oxidised M.S.sliding door bolts with nuts and screws etc. completea)250 x 16 mm |
| 14 | Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete :a)200 x 10 mm |
| 15 | Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. completea) 100 mm. |
| 16 | Providing 40 × 5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts,nuts and wooden plugs and embedding in cement concrete block 30 × 10 × 15 cm 1:3:6 mix (1 cement : 3 fine sand : 6 graded stone aggregate 20mm nominal size |
| 17 | Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6mm angle iron and 3mm M.S. gusset plates at the junctions and corners, & with cleats with bolts & nuts, rivets, locking arrangement, handles, hooks & eyes, pinlets including embedding in cement concrete of required grade for fixing in position, all necessary fittings, including applying a priming coat of approved steel primer etc. complete as required:-a)Using M.S. angels 40x40x6 mm for diagonal braces |
| 18 | Providing and fixing plain Multipurpose Cement board(High Pressure steam cured) as per IS : 14862 : 2000 with suitable screws for fibre cement board inceiling etc. complete (frame work to be paid separately) :6 mm thick cement board |
| 19 | Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content [Payment shall be made aftersubmission of Test Certificate issued by the Manufacturer].With ready mixed red oxide zinc chromatic on steel / iron works having VOC content less than 250 grams/ litre |
| 20 | Painting Steel work with Deluxe Multi Surface Paint toPainting Steel work with Deluxe Multi Surface Paint togive an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture |
| 21 | Providing and laying ceramic floor tiles in different sizes (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 - 2017 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid over 20 mm thick cement mortar 1:4 (1 cement : 4 fine sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc. complete.Ceramic Tiles 1st quality 300 x 300mm in all shades anddesigns |
| 22 | Providing and fixing 1st quality ceramic glazed wall tiles (minimum 200 x 300) conforming to IS : 15622 - 2017(thickness to be specified by the manufacturer) of approved make in all colours, shades of any size as approved by Engineer-in-charge in skirting, risers ofsteps and dados, laid over 12 mm thick bed of cement mortar 1 : 3 (1 cement : 3 fine sand) jointed with ordinary cement slurry including pointing with white cement mixed with pigment of matching shade complete. |
| 23 | Providing and fixing 28 mm thick door shutter made of solid PVC foam profile with homogenous fine cellular structure having smooth outer integral skin having 71mm width & 28mm thick as vertical & horizontal styles. Joints are made using solvent adhesive and GI ‘C sections (39mm x 19mm x 0.6mm thick) or M S pipe (40mm x 20mm ) stiffener frame insert & telescopic polymeric ‘L’ corners .The panel shall be filled with 3mm thick high - pressure compact laminate as per manufacturer’s specifications and directions of the Engineer-incharge,cover moulding shall be provided forcovering fixing screws and elegant look.( for W.C. bathroom door shutter). |
| 24 | Providing and fixing factory made door frame (single rebate) made of solid PVC foam profile with homogenous fine cellular structure having smooth outer integral skin having 60mm width & 30mm thickness and shall be fixed to wall as per instructions of Engineer-In-Charge using 100x8 sheet metal CSK screws |
| 25 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 26 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.-All kinds of soil. |
| 27 | Supplying and filling in plinth, under floor, foundations etc. with sand (fine) from local quarry with all lifts including spreading in horizontal layers, watering, grading to required slope, ramming, consolidating and compacting each layer by using plate compactor or by any suitable method complete. |
| 28 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering -- All work upto plinth level:a) 1:3:6 ( 1 Cement: 3 fine sand : 6 graded stone aggregate 20 mm nominal size) |
| 29 | First class brick work in foundation and plinth including cost of all materials as required complete:a)In cement mortar 1:4 ( 1 cement : 4 fine sand ). |
| 30 | First class brick work in superstructure above plinth level & upto floor-five level including cost of all materials as required complete:a) In cement mortar 1:4 ( 1 cement : 4 fine sand ). |
| 31 | Half brick masonry work with first class bricks in foundation and plinth including cost of all materials as required complete:- In cement mortar 1:4 ( 1 cement : 4 fine sand ) |
| 32 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. -All kinds of soil |
| 33 | 12 mm cement plaster of mixa)In cement mortar 1 : 4 ( 1 cement : 4 fine sand ) |
| 34 | Neat cement punning. |
| 35 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 fine sand : 6 graded well burnt brick aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth. |
| 36 | Providing and fixing Stainless Steel AISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required: 1). Kitchen sink with drain board A.510x1040 mm bowl depth 225mm |
| 37 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : 1. White Vitreous china Orrisa pattern W.C. pan of size 580x440 mm with integral type foot rests. |
| 38 | Providing and fixing G.I. pipes of medim class as per IS : 1239 with latest amendment complete with G.I. fittings and clamps, including cutting and making good the walls etc. complete as per CPWD specification and direction of the Engineer - in -charge. Internal work - Exposed on wall.i. 15 mm dia. nominal bore |
| 39 | ii. 20 mm dia. nominal bore |
| 40 | Making connection of G.I. distribution branch with G.I. main offollowing sizes by providing and fixing tee, including cutting & threading the pipe etc. complete as per CPWD specification and direction of the Engineer - in - charge.i. 25 mm to 40 mm dia. nominal bore |
| 41 | Providing and fixing G.I. Bend /elbow in the pipe line including testing of joints complete as per CPWD specification and direction of the Engineer - in - charge.i. 15 mm dia. |
| 42 | ii. 20 mm dia. |
| 43 | Providing and fixing G.I. equal Tee with the pipe line including testing of joints complete as per CPWD specification and direction of the Engineer - in - charge. ii.20 x 20 x 20 mm dia |
| 44 | Providing and fixing of Brass Union Joints ( Medium class ) with the pipe line including testing of joints complete as per CPWD specification and direction of the Engineer - in - charge.i. 15 mm dia. |
| 45 | ii. 20 mm dia. |
| 46 | Providing and fitting fixing of brass fullway valve with handle in the GI pipe line including cutting, threading etc. complete as per CPWD specification and direction of the Engineer - in - charge.iii. 25 mm dia |
| 47 | Providing and fixing brass stop cock of approved quality :a) 15 mm nominal bore. |
| 48 | Providing and Fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x265mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : a).One urinal basin with 5 litre white P.V.C. automaticflushing cistern. |
| 49 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangular shape 453x357mm |
| 50 | Providing and fixing glazing of approved quality in aluminium doors, windows, ventilator, shutters and partition etc. with EPDM rubber / neoprene gasket etc.complete as per architectural drawing and the direction of Engineer-in-charge (Cost of snap beading shall be paid in basic item) :-16.3.1 With float glass panes of 4.0 mm thickness ( weight not less than 10.0 kg / sqm ) |
AI Tender Summary
Tender Timeline
Jul 26, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedAug 09, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedAug 09, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender