Tender For Composite Tender For Construction Of Class Room And Renovation Of Existing Building Of Anchalika Mahila Secondary School, Bandhamunda In The District Of Jajpur For The Year 2023-24.
Tender Value
33.26 Lakhs
Estimated cost
Bid Submission
04 Aug 2023
0 days left
EMD
33265
Bank guarantee accepted
Document Fee
6000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
panikoili → Odisha
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Composite Tender For Construction Of Class Room And Renovation Of Existing Building Of Anchalika Mahila Secondary School, Bandhamunda In The District Of Jajpur For The Year 2023-24. Building Work
BOQ
| Sl. No. | Item Description |
| 1 | Civil itemsEarth work in excavation all kinds ofsoilwithin50m lead and 1.5m lift includingshoring, shuttering, propping bullahs, pilling dewatering from foundation, supplying & working pumps & stcking the excavated materials away from the working area including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m in depth inclduing cost, conveyance, taxes cess, royalties of all materials, cost of all labour, T&Prequired for the work etc. complete and as directed by the Engineer-in-charge. |
| 2 | Supplying, filling in foundation & plinth with sand in 3.5cm. (9\") thick layers including wtering and ramming with the conveyance royalties, taxes of the materials and labour with T&P required for the work etc. Complete (Measurement will be taken on finished compacted section only. |
| 3 | Cement concrete of proporation (1:3:6) in foundation and plinth using 4cm size clean hard black broken granite stone metal ofapproved quarry including hosting, lowering and laying concrete in layers not exceeding 15cm.(6\") thick to the required level ramming, watering, curing etc. complete including cost and conveyance of all materials with all taxes and royalties and all labour with T&P required for the work etc. comlete, including dewatering if required as per direction of the Engineer-in-charge. |
| 4 | Fly ashbrick25cmx12cmx8cm masonry in cement mortar(1:6) after immersing bricks for six hours in water before usein Foundation & Plinth with all necessary projections using Bricks of 10” size having a crushing strength of not less than 75Kgs/Sqcm with dimensioinal tolerance +2 perceent including splays cutting, circular moulding, chamfering, corbelling and similar such types of works with all necessary projections watering and curing. complete including cost and conveyance, royality & taxes of all materials and labour with T&P required for the work with all etc. complete in all all respect in all floors with all other specifications as per the direction of Engineer-in-charge. |
| 5 | R.C.C. work of M- 20 grade having Minimum compressive strength (in work test) of 200kgs/sqcm. Cubes at 28 days after mixing and test conducted in accordance with IS-456 and is 516 using 12mm. To 20mm.(1/2\" to \") size (20mm not to exceed 25%) nard black crusher broken granite sione chips approved quality and from approved quarry including hoisting, lowering, laying concrete and compacting by using vibrators watering for 4 weeks including centering shuttering and finishing the exposed surface and providing grooves or beads where necessary including cost, conveyance, taxes and royalties of all maierials and labour with T&P required for the work etc. complete in all respect but excluding cost of M.S.rod or Tor steel and binding wires of 18 to 20gauge and labour charges for straightening, cutting, bending, binding wires and tying the grills and placing in proper position including all other specification as per the direction of Engineer-in-charge. a) Column Base |
| 6 | b) Column & Beam |
| 7 | c) Plinth Beam |
| 8 | d) Lintel |
| 9 | e) Chajja |
| 10 | f) Roof slab |
| 11 | Straightening bent up or coiled rods cutting, bending, cranking, hooking, welding or jointing (if required)the M.S.rods or Tor steel and binding wires and binding, tying the grills, hoisting, lowering and placing in proper position as required for R.C.C. works andincluding cost, conveyance and taxes of M.S.rods or Tor steel and binding wires of 18 to 20gauge and labour with all T&P required for the work etc. complete in all floors(weight of binding wires/ over lapping/Wastage of rodwill not be considered for payment and payment will be made on weight of M.S.Rodsor Tor steels only) including all other specification as per the direction of the Engineer-in-Charge. |
| 12 | Fly ash brick 25cmx12cmx8cm masonry in cement mortar(1:6) after immersing bricks for six hours in water before use in Super structure with all necessary projections using Bricks of 10\" size having a crushing strength between 100Kgs/Sqcm to 149Kg/Sqcm. Including splays cutting, circular moulding, chamfering, corbelling and similar such types of works with all necessary projections watering and curing, complete including cost and conveyance, royality & taxes of all materials and labour with T&P required for the work with all etc. complete in all all respect in all floors with all other specifications as per the direction of Engineer-in-charge. |
| 13 | 16mm.(5/8”) thick cement plaster (1:6) over brick work finished smooth to inside surface of 9”/10” thick brick walls after raking out the joint including watering and curing with cost and conveyance of all materials and labour with T&P required for the work with all taxes and royalties etc. complete in all respect in all floors as per the direction of the Engineer-in-charge. |
| 14 | 12mm.(1/2”) thick cement plaster (1:6) over brick work finished smooth to inside/ outside brick walls after raking out the joint including watering and curing with cost and conveyance of all materials and labour with T&P required for the work with all taxes and royalties etc. complete in all respect in all floors as per the direction of the Engineer-in-charge. |
| 15 | 6mm thick cement plaster (1:4) over RCC surface finished smooth including closed deep chipping and slury tratment water and curing with cost and conveyance of all materials and labour with T&P required for the work with all taxes and royalties etc. complete in all respect in all floors as per the direction of the Engineer-in-charge. |
| 16 | Finishing surface of walls with cement based wall putty (water based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding stagging charges etc. complete as per specification including cost, conveyance labour and T&P etc. of all materials and labour etc. complete as per the direction of the Engineer-in-charge. |
| 17 | Suppying , fitting and fixing Vertified tiles in floors of size 600mm x 600mm of approved make(quality and design will be approvaled by Engineer-in- charge ) confirming to IS 13755 laid on in floors on 20mm thick bed of C.M(1:4)and filling joints with white cement of approved quality including cost of all materials,carriage ,labour,T & P & all taxes etc complete required for the workas per the direction of the Engineer-in-charge. |
| 18 | Supplying fittingfixing of vertified tiles(Plain Ivory)in skirting & dodosand risers of step size 600mx600m of approved make conforming to US 13755 laid on 12mm thick CM(1:3) and filling joints with white cement of approved quality including cost of all materials, labour T&P etc required for the work all complete. , |
| 19 | Supplying fitting and fixing of MSdoor, window with grill, made out of MS angle frame , MS Flat sheet etc of approvedsection & design, electrically welded properly with all necessary locking arrengement,with Plain Cement concrete (1:2:4) for clamp fixing including cost, conveyance, royality taxes for all materials etc. complete as per the direction of the Engineer-in-charge(Design of grill and the size of materials i.e. M.S.flat will be approved by the Engineer-in-charge before making andthe weight will be taken for payment of finished materials before fixing). |
| 20 | Wall painting two coats with plastic emulsion paint over a coat of primer with all cost of paint labour, T&P with cost and conveyance of all materials and labour with T&P required for the work with all taxes and royalties etc. complete in all respect in all floors as per the direction of the Engineer-in-charge. |
| 21 | Finishing Wall 2 (Two) coats with any approved Weather coat paint over a coat at cement wash with brush to outside wall surface offer cleaning surface including cost of paint and primer, watering and curing cost conveyance and axes off all materials and labour with T&P required for the work etc. complete. |
| 22 | Providing labour for fixing of M.S.Grill etc including all materials and labour with T&P required for the work etc. complete as per the direction of the Engineer-in-charge. |
| 23 | Painting2 (Two) coats with any approved Synthetic Enamel paint over a coat of primerwith brush to outside wall surface after cleaning surface including cost of paint & primer watering and curing cost conveyance and taxes of all materials and labour with T&P required for the work etc. complete |
| 24 | 2.5cm. thick grading Cement concrete (1:2:2) on roof slab with 4.7mm size hard geanite crusher broken chips in desire thickness and planarity of approved quality and from approved quarry including hosting, lowering and laying concrete in layers to the required level ramming, watering curing and cost of all labour T&P etc complete. |
| 25 | Removing old grading plaster from roof slab, clearing the surface lowering and removing the debris within 50m lead including cost, carriage and royality of all materials etc complete T&P required for the work as per the direction of the Engineer-in-charge. |
| 26 | E.I itemsRecessed wiringto light point/ fan point/Call bell point with 1.5sqmm FR PVC Insulated single core multistarand copperConductorof ISI marked with 20mm dia non metalic PVC flexible conduct with 6Amps semiswitch socket & 1.5sqmm FR PVC Single core multistrand copper conductor as earth wire includingallaccessories and connection as per direction of Engineer in charge (Make-Legrand / L&T/ Havels ) -do-light pointGroup-A |
| 27 | -do-light pointGroup-B |
| 28 | -do-light pointGroup-C |
| 29 | -do-Fan pointGroup-B |
| 30 | -do- Fan pointGroup-C |
| 31 | Supply and fixing of 5/6Amps Modular socket on existing board.Make-Legrand / L&T/ Havels ) |
| 32 | Supply &Fixing of 3nos 3pin 5/6Amps semi modular switch socket,1no of 5pin 15/16Amps socket outlet including connection. |
| 33 | Recessed wiring to submain in the following insulated single core multistrand copper conductor of ISI markedin the following mm dia non-metallic heavy duty flexible conduit 1.6 mm thick along with the following sq.mm FR PVC insulatedsingle core multistrand copper conductoras earth wire as required complete in all respect as per direction of Engineer-in-charge.(Make of wire-Finolex/L&T/Havells)2x1.5 sqmm +1x1.5 sqmm |
| 34 | 2x2.5 sqmm +1x1.5 sqmm from MCB box to switch board &15Amps plug. |
| 35 | 2x6 sq mm+1x2.5 sqmm form Main switch to MCB Box. |
| 36 | Providing and fixing 8 SWG (4 mm) dia copper wire on surfae or in recess for loop earthing along with existing surface / recessed conduit / submain wiring /cable as required. |
| 37 | Supply and fixing of followingMCB distribution board 240V on recess complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required (but with out MCB/ RCCB/ Isolator) Make-siemens/ Legrand/schnider 12waysingle door |
| 38 | Supply and fixing of following MCB \"C\" series suitable for lighting and other loads of the following poles in the exiting MCB DB ISI marked complete with connections testing and commissioning etc (Make- siemens/ Legrand/schnider )6/10Amps single pole MCB. |
| 39 | 63Amps double pole MCB. |
| 40 | Supply and fixing of Bakelite Angle holder/Batten Holder of ISI marked in place of ceiling Rose completein all respect as per direction of Engineer in charge (Make : Cona / Anchore) |
| 41 | Supply and fixing of 9watt LED lamp.Make-Havells/Philips |
| 42 | SITC of Energy efficient 1x20watt LED Tube light fitting withcomplete with as per direction of Engineer-in-charge.Make- Philips/Bajaj |
| 43 | S/Fof 1200mm sweep white/milky colour ceiling fanISI Marked with regulatorincludingconnection complete in all respect as per direction of Engineer in charge (Havells velocity/Crompton jura/Orient PSPO) |
| 44 | Supply and fixing of 32Amps ICDP Mainswitch on MS Box..Make-Anchor/L&T |
| 45 | Supplying and fixing of following Modulartype switch / socket on the existing switch box / cover including connections etc as required.Make-L&T/Legrand/Roma5/6Amps modular switchswitch |
| 46 | 5/6Amps modular socket |
| 47 | 15/16Amps modular switch |
| 48 | 15/16Amps modular socket |
| 49 | Supplying and fixing of following Modulartype base & cover as follow.Make-L&T/Legrand/RomaModular base & cover for 2 module |
| 50 | Modular base & cover for 4 module |
| 51 | Modular base & cover for 6 module |
| 52 | Modular base & cover for 8 module |
| 53 | Supply and fixing of Angle holder .Make-Anchor |
| 54 | Supply and fixing of 9 watt LED Lamp.Make-Philips/Havells/Bajaj |
| 55 | Supply and fixing of Electronics socket type fan regulator.Make-Legrand/Havells/Anchor |
| 56 | S/F of 1X30Watt LED Tube light fitting with complete as per direction of Engineer-in-charge.Make- Philips/Bajaj |
| 57 | Supply and fixing of following MCB \"C\" series suitable for lighting and other loads of the following poles in the exiting MCB DB ISI marked complete with connections testing and commissioning etc (Make- siemens/ Legrand/schnider )32Amps double pole |
| 58 | 6/10Amps single pole MCB |
| 59 | Supply and drawing of following sizes FR PVC insulated single core multistrand copper conductor in existing surface / recessed STEEL/PVC conduit as required.2x1.5sqmm |
| 60 | 2x2.5sqmm |
| 61 | 2X4SQMM |
| 62 | S/Fof 1200mm sweep white/milky colour ceiling fan ISI Markedincludingconnection complete in all respect as per direction of Engineer in charge (Havells velocity/Crompton jura/Orient PSPO) |
| 63 | P.H itemsSupplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor pvc pipesconforming to ASTM-D-1785/89 (Sch-80) and pipe fittings of the following nominal bore with clamps including making good the wall, ceilingand floor all complete as per specification and direction of the Engineer in charge.In ground floor25mm dia PVC ASTM pipe (sch-80) |
| 64 | 32 mm dia PVC ASTM pipe (sch-80) |
| 65 | Supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking GI pipes and fittings/ PVC pipes and fittings etc all complete as per PH specification and direction of the Engineer in charge.250mmthick wall |
| 66 | Supplying all materials, labour, T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all jointing materials complete as per specification and direction of the Engineer in charge.15 mm dia CP long body Bib cock(Plaza /Zigma/ Amber) make |
| 67 | 25mm CPVC Ball Valve(Ashirvad Make ) |
| 68 | 15mm dia CP flange |
| 69 | 15mm dia CP extension piece |
| 70 | Supplying all materials,labour,T&P and fixing Rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS : 12701--1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc, including hoisting upto a height of 5 metres above ground level and placing the tank to the required position and providing 1st class K.B brickwork in cement mortar (1:6) of 0.46m height in staging and in circular protection wall to support the tank, 12mm thick cement plaster (1:6) over brickwork, R.C.C slab of size 1.60mx1.60m and 0.10m thick, R.C.C beam of 0.25mx0.30m and 2.60m average length in cement concrete(1:2:4) using 12mm size h.g chips including centering and shuttering,watering, curing, conveyance of all materials to worksite etc all complete as per specification and direction of the Engineer in charge .On the roof of groundfloor 1000litre capacity water storage tanks ( Sintex / Supreeme make ) |
AI Tender Summary
Tender Timeline
Jul 26, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedAug 04, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedAug 05, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender