Orissa Industrial Infrastructure Development Corporation-IDCO has published Tender For Laying Of Treated Water Rising Main From Odisha Biotech Farm Junction To Odisha Adarsha Vidyalaya At Andharua Bhubaneswar. Submission Date for this Tender is 11-08-2023. Pipe Laying Tenders in bhubaneswar Odisha. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | Earth work : |
2 | Earth work in hard soil or gravelly soil within 50m initial lead & 1.5m initial lift including dressing, levelling & breaking clods to maximum 5cm to 7cm & laying in layers not exceeding 0.3m in depth & as per specification & direction of Department. |
3 | Earth work in stoney earth & gravels mixed with stone boulders not exceeding 0.014 cum in volume within 50m initial lead & 1.50m lift including dressing, levelling & breaking clods to maximum 5cm to 7cm & laying in layers not exceeding 0.3m in depth & as per specification & direction of Department. |
4 | Exavaction of pipe line trench in laterite rock or any hard rock(other than granite or disintegrated rock)removed by chiselling including dressing and levelling and benching the bed not exceeding 1.50 depth & depositing the soil withinintial lead of 50m & as per specification approved by the department. |
5 | Filling the pipe line trenches with sand including watering & ramming etc. complete including all labour, T&P, cost of sand, conveyance, taxes, royality, loading & unloading as per specification & direction of EIC. |
6 | Filling foundation trenches and Plinth with excavated & selected earth, laying in layers not exceeding 23cm thick well watered & rammed etc. complete including labour , T&P, lead & lift cost & conveyance, loading, unloading etc. complete as per specification & direction of EIC. |
7 | Providing all materials, labour, T&P for laying of centrifugally cast (Spun) Ductile Iron pressure pipes for water works purpose with socket & spigot ends confirming to IS-8329/2000 with 3rd revision in standard lengths for classification K-9 suitable for push on joints (Rubber Gasket "D" jointing) with outside zinc coating as per IS-8329/2000 including alligning the pipes inside trench as per IS-12288/1987 including testing the pipe line with required water pressure as per IS-8329/2000 amendment 1st, Sep. 2011 etc.all complete as per specification & direction of EIC (Excluding cost for earth work, jointing of specials, rubber gasket & fittings which shall be paid separately). |
8 | 250mm Dia D.IK-9 Pipe |
9 | Providing all labour, T&P and making push-on joint with rubber gasket ring as per IS-5382/1985 1st Revision suitable for D.I pipe and fittings of the following nominal dia including testing of the joints with required water pressure (The cost is inclusive of cost of ring) and all complete as per specification & direction of E.I.C. |
10 | Material with labour (For fittings) |
11 | 250mm Dia D.IK-9 Pipe |
12 | Labour only for pipes |
13 | 250mm Dia D.IK-9 Pipe |
14 | Providing all materials, labour, T&P and laying in trenches following D.I fittings & fixing with the pipes after cutting the pipes to required shape & size including wastage etc. confirming to IS-9523:2000, 1st revision with pressure rating PN-1.0 of following nominal diameter, all complete including test the joints with required water pressure as per specification & direction of EIC. (Excluding cost of earth work in trenches, back filling & rubber gasket) |
15 | 250mm DI 90 degree Bend |
16 | 250mm DI 45 degree Bend |
17 | 250mm DI 22.5 degree Bend |
18 | 250mm Flanged Tail piece |
19 | 250mm dia MJ Collar |
20 | 250mm Socketed Tail piece |
21 | 250mm x250mmx250mmAS Tee |
22 | 250mm dia Blank flange |
23 | Providing, fitting & fixing of following size valves as per IS specifications including fixing the same with supply of required jointing materials like rubber insertion, MS nuts & bolts, paint etc. and testing the joints with required water pressure & all complete as per specification & direction of E.I.C. (Make :-Kirloskar / Vag/ Audco) |
24 | 250mm dia D.I Sluice valve (Non rising spindle) of PN-1.0 as per IS-14846/2000 with ISI mark. |
25 | 250mm dia DI NR Valve (Make:Kirloskar/Vag/Audco) |
26 | 25 mm dia Single air valve with metal strap for pipe of PN-1.0 as per IS-14845/2000 with ISI mark. |
27 | Providing all materials, labour and T&P required for construction of Flyash Brick valve chamber of following minimum sizewith CC 1:3:6 with 40mm size h.g. stone metal (crusher broken) of 100mm thick, earth work excavation in all kinds of soil/rock including back filling duly watered & rammed as per approved design & drawing and fixing pre-cast factory made SFRC man hole cover with frame of clear opening of 600mmx450mm and providing and fixing of Polypropylene Steel Reinforced Man Hole stps of approved quality and size in two parallel lines of 300mm spacing in vertical walls with center to center 375mm(staggered).Painting the chamber with 2 (two) or more coats of approved water proofing cement paint over a coat of cement wash. Printing and writing the wall sign boardof approved size and specification including cost of all materials, labour, T&P, royalties, all taxes and hire & running charges of machineries with POLetc. all complete as per specification & direction of EIC. |
28 | Inner size 1200mm x 1200mm x 1500mm height valve chambers |
29 | Construction of RCC M-20 thrust block of following minimum size having minimum cube strength 200Kg/cm²at 28 days confirming to IS-456/2000 and IS-3370 at all locations & heights using graded H.G. stone aggregate (crusher broken ) of 20mm & down size including machine mixing, lifting, conveying, placing in position, mechanical consolidation, curing, dewatering, if necessary, including cost for rigid, levelled & plumbed centering & shuttering to required slope, allignment & size for all kinds of RCC work with steel centering materials with all bracing, ties, anchorage & supports & removing the same after required interval from the date of casting, Providing & Placing MS reinforcement (HYSD bars) of required dia including cutting, bending, binding, straightening of approved quality as per approved design & drawing & tying the grills for RCC works & placing in position using binding wires 18 to 20 gauge soft drawn & cold annealed, PCC 1:3:6 with 40mm size h.g. stone metal (crusher broken) of 100mm thick earth work excavation in all kinds of soil/rock including back filling duly watered & rammed as per approved design & drawing etc. all complete as per specification & direction of EIC. |
30 | RCC Thrust block of size 1000mm x 1000mm x 1000mm height |
31 | Providing all materials , labour, T&P for making flange joints with the pipes & fittings including supply of required & approved size of M.S. nuts & bolts, washer & rubber insertion & paints etc. including testing the joints with required water pressure etc. all complete as per specification & direction of EIC. |
32 | 250mm size Flange joint |
33 | Supply, installation, testing and commissioningof Smart water meter siutable for followng pipe lines with IOT Technology using LORA or NBIOT technology& related infrastructure work |
34 | 250mm dia |
35 | Cutting asphalt or bituminous road for taking the sewer line through and making good to the damages including cost of alllabour, T & P etc. all complete as per the direction of engineer-in-charge. (15cm thick) |
36 | 20.0mtrx1.0mtr |
37 | Cement concrete (1:3:6) with 4cm. Size crusher broken hard Granite metal including cost of all labour, materials with all taxes, lead,T & P etc all complete .For repairing road work |
38 | Cement concrete (1:2:4) with 12mm size crusher brokenhard granite chipsincluding cost of all labour, materials with all taxes, lead, T & P etc all complete. |
39 | GST as applicable Will be Paid Extra. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail