Purvanchal Vidyut Vitaran Nigam Limited has published Provide Of 11 Kv And Lt Lines Commandent, 22Th Border Security Force, Chauki- Pathalahawa Under Edd-Nichlaul Under Deposit Scheme Year 2023-24.. Submission Date for this Tender is 08-08-2023. Overhead Line Tenders in nichlaul Uttar Pradesh. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | fo|qr forj.k [k.M&fupykSy ds vUrxZr tek ;kstuk ds vUrxZr VuZ dh vk/kkj ij dekaMs.V] 22 oh0 okfguh l’kL= lhek cy] egjktxat] pkSdh&iFkygoka dk dk;ZA |
| 2 | Supply of Following Material As per latest IS/Specification:- |
| 3 | STP Pole 11 Mtr Long |
| 4 | Pcc Pole 8.5 Mtr Long |
| 5 | Stone Pad 300x300x75 mm |
| 6 | ACSR Weasl Conductor |
| 7 | 11 KV X-arm holding Clamp for S.T. Pole |
| 8 | 11 Kv.V-Type X-arm |
| 9 | 11 Kv.Pin Insulator with pin |
| 10 | 11 Kv.Disc Insulator with fitting |
| 11 | 11/.4 KV63 KVA Transformer |
| 12 | F-Bracket |
| 13 | Dropper Channel |
| 14 | Earthing Set Complete |
| 15 | Stay Set Complete |
| 16 | Top Channel |
| 17 | GI WIRE 6SWG |
| 18 | Cross bracing With Clamp |
| 19 | Dead End Clamp |
| 20 | Transformer Base |
| 21 | Al. Lug for 63 KVA Transformer |
| 22 | Eye Hook |
| 23 | Eye Bolt |
| 24 | . LT armoured cable of size (3.5x70) sqmm |
| 25 | Tee-of Channel |
| 26 | 11 Kv. X-arm Holding Clamp for PCC Pole |
| 27 | F-Bracket Clamp |
| 28 | Z Clamp |
| 29 | Dropper Channel Clamp |
| 30 | Gurading Angle |
| 31 | Gurarding Angle Clamp |
| 32 | Tee-of Channel Holding Clamp |
| 33 | Danger Board With Clamp |
| 34 | Top Channel Holding Clamp |
| 35 | Nuts & Bolt |
| 36 | dk;Z dk fooj.k%& |
| 37 | The excavation of foundation pit in mix soil/normal soil/soft soil & hard rock as per site condition and its back filling and leveling etc. The size of the pit will be (750x450)mm and having depth of 1/6th of the full length of the support. Erection of support, complete with providing & fixing of all clamps and other accessories as per drawing. The work includes carriage and handling of supports from sectional store to pit site as well as an fabrication work if required. 1) 8.5 Mtr Single PCC Pole. |
| 38 | The excavation of foundation pit in mix soil/normal soil/soft soil & hard rock as per site condition and its back filling and leveling etc. The size of the pit will be (750x450)mm and having depth of 1/6th of the full length of the support. Erection of support, complete with providing & fixing of all clamps and other accessories as per drawing. The work includes carriage and handling of supports from sectional store to pit site as well as an fabrication work if required. 1)11Mtr Long STP, SP-55 Round Pole |
| 39 | Grouting of supports in CC 1:4:8 (Cement, sand & 20mm stone grift). Grouting will be done in the block of size (450x450)mm x1/6th of full length of the support, upto ground level, 300mm plinth above the ground level with C.C. 1:3:6 (Cement, Course sand and Stone grift) with muffing as per drawing. Work includes back filling and proper ramming. 1) 8.5 Mtr PCC Pole |
| 40 | Grouting of supports in CC 1:4:8 (Cement, sand & 20mm stone grift). Grouting will be done in the block of size (450x450)mm x1/6th of full length of the support, upto ground level, 300mm plinth above the ground level with C.C. 1:3:6(Cement, Course sand and Stone grift) with muffing as per drawing.Work includes back filling and proper ramming. 1)11Mtr Long STP, SP-55 Round Pole |
| 41 | Grouting of stay rods (20x1800)mm including all work of excavation, cement concrete in size (0.60x0.60x0.30)m in ratio 1:4:8 cement, sand, 20mm Stone grift) as per drg. Including back filling of soil and proper ramming etc. |
| 42 | Fixing, tightening & nozzling of stay wire with stay rod with the poles of required tension as per drawing, including providing & fixing of Stay Insulators of 33KV and Stay Clamps. |
| 43 | Installation of 11 KV X-arm on Poles with Cross Arm Holding Clamp as per specification. |
| 44 | Installation of Top Channel /T-off channel with clamp with nut and bolts. |
| 45 | Laying, spreading, lifting and final sagging of 3 phases of ACSR Weasel conductorin accordance with profile and sag chart including binding, Jumphering and fixing of P.G. Clamp as per requirement in 03 Nos. conductor in parallel. |
| 46 | Guarding between two like single Pole/Double Pole/ Four Pole to guard LT/ 11 KV Line/ Telephone Pole/ River Crossing/Road Crossing etc. with G.I. wire No. 6SWG and GI Wire No 8 SWG including cutting with fabrication and fixing of guarding Cross arm with clamps, nuts and bolts as per drawing. |
| 47 | Installation and fixing of Top Channel/ Tee-off Channel/ Dropper Channel with Clamp, nuts and bolts on double Pole Structure |
| 48 | Fixing of Transformer base with Clamp, nuts and bolts on Double Pole Structure |
| 49 | Fixing of Crossing Bracing with clamp, nuts and bolts on Double Pole structure |
| 50 | Wrapping of barbed wire on 8.5 Mtr. PCC/ 11 Mtr. ST SP-55 Poles as anti-climbing device for a length of 0.9Mtr. Wire pitch/gap 13mm and fixing upper and lower end keeping lower end at a height of 2.75Mtr. from the ground, complete with providing and fixing of lower end & upper end clamps made of M.S. Flat 40x5mm complete with nuts & bolts. |
| 51 | Earthing of 8.5 Mtr PCC Pole with M.S. earth Rod of (20x2500)mm long including excavation of pit and driving M.S.Rod 3.0M apart from suppor and 0.5M below the ground level and connecting belowl the earth electrodes with the help of G.I.wire No. 6 SWG and earthing lugs. |
| 52 | Earthing of 11 Mtr ST Poles with M.S. earth Rod of (20x2500)mm long including excavation of pit and driving M.S .Rod 3.0M apart from suppor and 0.5M below the ground level and connecting below the earth electrodes with the help of G.I. wire No. 6 SWG and earthing lugs. |
| 53 | Installation of distribution Transformer on Double Pole structure with H.T and LT side connection and Transformer Body & Neutral Earthing by MS Earthing and GI Wire a) 63 KVA |
| 54 | Laying of LT Cable of size 3.5x240 sqmm |
| 55 | Providing & fixing of SMC Danger board at each location as per specification of the drawing. Size 200mmx250mm & 3mm thickness with G.I Clamp & nut & bolt. |
| 56 | Chopping of branches of trees of eucalyptus, Neem, Banyan and other kind of trees along the route of the line and disposal of the same at suitable place. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
