Construction Of Varanda.
Tender Value
64066
Estimated cost
Bid Submission
31 Jul 2023
0 days left
EMD
12800
Bank guarantee accepted
Document Fee
767
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
gursahaiganj → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Varanda.
BOQ
| Sl. No. | Item Description |
| 1 | Earth workinexcavation in tranches for foundation pipes cable etc ordinary soil ( loan clay or sand ) including lift upto 1.5 m. lead upto 50 m and dressing of sides and ramming of bottom and disposal of surplus excavation earth as directed by the Engineer incharge with a lead of 50 m. |
| 2 | Providing and laying in cement concrete 1:4:8 ( 1cement : 4 fine sand : 8 graded brickaggregate 40mm nominal size ) andcuring comlete, including cost of formwork in foundation. |
| 3 | R.c.c footing work with cement approved coarse sand and 2cm gauge approved stone ballast in the proportion 1:2:4 in R.cc Slab supply of reinforcement and its bending butinculding its fixing and binding the same with 24 bwgi binding wire and including necessary oentering and shuttering etc. And also including supply of all materials labor and tools and plants etc. Required for proper completion of the work. Strength of the concrete shall not be less than M-150. (5-Chapter S.I. No.-287) |
| 4 | R.c.c beam work with cement approved coarse sand and 2cm gauge approved stone ballast in the proportion 1:2:4 in R.cc Slab supply of reinforcement and its bending butinculding its fixing and binding the same with 24 bwgi binding wire and including necessary oentering and shuttering etc. And also including supply of all materials labor and tools and plants etc. Required for proper completion of the work. Strength of the concrete shall not be less than M-150. (5-Chapter S.I. No.-285) |
| 5 | R.c.c column work with cement approved coarse sand and 2cm gauge approved stone ballast in the proportion 1:2:4 in R.cc Slab supply of reinforcement and its bending butinculding its fixing and binding the same with 24 bwgi binding wire and including necessary oentering and shuttering etc. And also including supply of all materials labor and tools and plants etc. Required for proper completion of the work. Strength of the concrete shall not be less than M-150. (5-Chapter S.I. No.-288) |
| 6 | R.c.c slab work with cement approved coarse sand and 2cm gauge approved stone ballast in the proportion 1:2:4 in R.cc Slab supply of reinforcement and its bending butinculding its fixing and binding the same with 24 bwgi binding wire and including necessary oentering and shuttering etc. And also including supply of all materials labor and tools and plants etc. Required for proper completion of the work. Strength of the concrete shall not be less than M-150. (5-Chapter S.I. No.-288) |
| 7 | Mild steel or iron in plain work such as reinforced concrete orreinforced brick work (when not included in and an overall rates) brought for proper completion of the work and including supply of steel, its wastage bend hooks and authorized over lapping shall be measured up to floor two level.(b) 1 Omm to 12mm tor.(Chapter No. 10 5.1. No. 504(B)) |
| 8 | Class-150 (Non Modular) brick work in 1:6 Cement and Coarse sand mortor in Superstracture for wall thickness 12cm. And including supply of all material, labour and tolls and plants etc. All complete. (S.I. No. 305) |
| 9 | Class-150 (Non Modular) brick work in 1:4 Cement and Coarse sand mortor in Superstracture for wall thickness 12cm. And including supply of all material, labour and tolls and plants etc. All complete. (S.I. No. 305) |
| 10 | 12mm thick cement Plaster with cement mortar in proportion of 1:3cement and fine sand in single coat on fair side of single or half brick wall for interior plastering including arises, interior rounded angles chamfers and of rounded angels not exceeding 80 mm in grit and finished even and smooth. |
| 11 | Providing andLaying in cement concrete 1:2:4 of not less than M20 stone ballast (20mm nominal size):2 approved coarse sand :1 cement and curing complete, including cost of formwork in foundation and floors.Si no 4.6 |
| 12 | Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. non rectficed ordnary tile.Knj SOR Chap-14 SI No. 14.19 ( Size 300 X450 mm ) |
| 13 | One priming coat and one coat of dry distemper on new work including supply of all materials, labour and T&P etc. required for proper completion of the work. |
| 14 | Finishing wall Putty Aproved brand and manufacture and of required shade and undecorated wall surface to give and even shade over and including curing and cost of all material. (15-Chapter Si.No.31 New) |
| 15 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade:New work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm) Chapter 15 dsr13.46.1 |
| 16 | GST |
AI Tender Summary
Tender Timeline
Jul 25, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedJul 31, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJul 31, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender