Tender For Sitc Of Air Conditioners For New Museum And Old Auditorium At Csirceeri, Pilani (Rajasthan)”. 1 Supply, installation, testing, commissioning of following modular type Variable Refrigerant Flow/Variable Refrigerant Volume air cooled outdoor units suitable for cooling and heating , having all hermetically sealed inverter type scroll compressor(s), minimum two compressor above 14 HP modules, microprocessor based controller, top discharge type condensing unit(s), with R-410A refrigerant, Vibration isolators, with suitable masonary foundation work etc. complete as required. The unit shall deliver the rated capacity at AHRI conditions and work even at 50 degree celcius ambient temperature without tripping.The unit shall be suitable to work on 400V +/-10%, 3 Phase, 50 Hz AC power supply. The unit shall be filled with first charge of refrigerant and ready for use as required. The COP at AHRI conditions shall not be less than 3.1 and IEER not less than 6.5 .The ODU(s) net weight shall not be less than 350 kg. (To verify ODU capacity and COP values the bidder is required to submit the OEM Data book to the department ) Preferable make: Hitachi, O General, Blue star, Toshiba 1.1 Outdoor unit 16 HP 4 Nos. 2 Supply, installation, testing, commissioning of following minimum capacity VRV/VRF High wall type indoor unit equipped with washable synthetic media pre filter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil section with DX copper coil, electronic expansion valve, outer cabinet, cord less remote control, drain pan and necessary accessories etc., suitable for operation on 230 V +/- 10%, 50 Hz, single phase AC supply, complete as required. The unit shall have force shut down provision in case of fire on receiving signal from BMS system. The cooling capacity of indoor unit will be at air inlet conditions of 27 degree C DB and 19 degree C WB temperature. Preferable make: Hitachi, O General, Blue star, 2.1 High wall type indoor unit 2.0 TR 24 Nos . 3 Supply, Installation, Testing, Commissioning including vaccumiazation and nitrogen testing of following normal sizes of soft/hard drawn copper refrigerant piping for VRV/VRF system, complete with fittings, refnets/Y-joints with suitable ring type hanger supports, jointing/brazing including accessories, insulated with XLPE class-O tubler section/with class-O closed cell elastomeric nitrile rubber tubular sleeves sections of specified thickness as given below for suction and liquid lines, all accessories as per specification etc. as required: Preferable Make: Rajco/Mandev/yorkshire/Totaline/vaishali/ Maxflow /Parasmani 3.1 6.4 mm dia (OD)(Soft drawn) with tube thickness 0.8 mm with 12 mm thick insulation. 85 RMT 3.2 9.5 mm dia (OD)(Soft drawn) with tube thickness 0.8 mm with 12 mm thick insulation. 45 RMT 3.3 12.7 mm dia(OD)(Soft drawn) with tube thickness 0.8 mm with 12 mm thick insulation. 100 RMT 3.4 15.86 mm dia (OD)(Soft drawn) with tube thickness 0.8 mm with 12 mm thick insulation. 130 RMT 3.5 19 mm dia (OD)(Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation. 50 RMT 3.6 22.2 mm dia (OD)(Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation. 35 RMT 3.7 25.4 mm dia (OD)(Hard drawn) with tube thickness 1.2 mm with 19mm thick insulation. 35 RMT 3.8 28.58 mm dia (OD)(Hard drawn) with tube thickness 1.2 mm with 19mm thick insulation. 70 RMT 4 Laying and fixing of PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on cable tray as required. 4.1 Above 35sqmm and up to 50 sq.mm 60 RMT 4.2 Upto 35 sqmm 40 RMT 5 Laying of PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. 5.1 Above 35sqmm and up to 50 sq.mm 20 RMT 6 Supply& making one end termination with heavy duty single compression brass gland SIBG type, copper lugs duly crimped with crimping tool, PVC tape etc. for following size of armoured PVC insulated & PVC sheathed copper cable of 1.1 KV grade as required. 6.1 3.5core x 50 Sq.mm. copper cable 4 Nos. 6.2 3.5core x 25 Sq.mm. copper cable 8 Nos. 7 Providing and fixing 4.00 mm dia. copper earth wire on surface or in recess for loop earthing along with existing surface / UG cable as required. 120 RMT 8 Supplying and fixing following size powder coated M.S. ‘C’ channel type trays with cover including connectors, bend, tee etc. and fitted on wall/floor/ roof with M.S. fasteners, supports, clamps/MS hanger etc. as required. 8.1 100 mm width X 75 mm depth X 1.0mm thickness. 140 RMT 8.2 200 mm width X 75 mm depth X 1.0mm thickness. 140 RMT 9 Supply and fixing of heavy duty rigid UPVC piping (for drain) on wall complete with fittings and clamps/supports etc. The joints shall be properly sealed with rubber based adhesive to ensure proper bonding. The rate shall include UPVC Coupler, reducer, socket, bend, Tee as required as per the site to connect with the Drain Hopper of IDUs. 9.1 25 mm dia. rigid U PVC pipe. 80 RMT 10 Supplying and Fixing of following sizes powder coated M.S. stand for outdoor units, including Fasteners (Fischer) & Fixtures etc. Complete in all respect. 10.1 M.S. stand(16 HP outdoor unit) 4 Nos. 11 Supply and laying of following sizes of FRLS PVC insulated flexible copper conductor cable of 1.1 KV grade for power supply to indoor unit i/c providing and laying of suitable size PVC casing capping from power point to indoor unit on surface and where ever required etc. as required. Preferable Make: Finolex, KEI, Havells, Polycab, L&T, RR 11.1 3C x 1.5 Sq.mm cable 100 RMT 12 Supply and laying of following size overall shielded Control cum Communication cable in suitable PVC conduits between indoor and outdoor units. Preferable Make: Finolex, KEI, Havells, Polycab, L&T, RR, Universal. 12.1 2C x 1.0 Sq.mm shielded cable 165 RMT 13 Supply of following sizes of 1.1 KV grade copper conductor XLPE insulated and PVC sheathed armored cable conforming to IS:7098 (Part-I) 1988 of as required. Preferable Make: KEI, Havells RPG, Unistar, Skytone, Polycab. 13.1 3.5 core x 50 Sq.mm. copper cable 80 RMT 13.2 3.5 core x 25 Sq.mm. copper cable 40 RMT 14 Supply, fabricating, testing and commissioning of Kiosk type weather proof distribution feeder pillar box of size 800 x 850 x 300 mm with a taper of 75 mm at top (for protection from rain water) and made out of 3.2 mm (10 gauge) thick CRCA MS Sheet, front and back both side openable, duly hinged doors with locking arrangement by providing both sides hold drafts and all hardware for fabrication of box. The cubical panel should be dust and vermin proof followed by duly phosphatized and powder painted in gray or required shade after rinsing. The cubical panel should be mounted with hardware on angle iron frame 40 x 40 x 6 mm and 400 mm long legs duly primered and black painted. Frame be grouted with metal fastener and cement concrete 1:3:6 ratio in 150x150x300 mm and providing brick masonry along angle iron frame above ground level, complete in all respect including S/F of following accessories, their inter connections with suitable size FR PVC copper wires, lugs, testing etc.as reqd. Panel should be fabricated through electrical panel builders only and Delivery challan should be produce along with panel. The panel should comprising of as per following – Preferable panel fabricators:- •Krypton power control(India) Pvt .Ltd., delhi •Electro power Pvt .Ltd., Noida •KMG A to Z system Pvt.Ltd., Noida •SPC Electrotech Pvt.Ltd., delhi •Johns Electric Co. Pvt.Ltd., Jaipur •Westron control& automation, Bhiwadi •Nitya Electro control, Noida INCOMER: a) 1No- quick make and quick break 4 Pole current limiting MCCB- 125 Amp., 35 KA with adjustable O/L setting & Thermal Magnetic Release and conforming to IS:13947-2/ IEC 60947-2 with front face and centralized adjustable, line load inter changeability including making connections with lugs/ spreaders etc. as required.(Preferable 2 Nos. make: Seimens, Havells, Scheider, L&T, GE) b) 1 Set – 200 A, 4 strips copper bus bar of suitable length, fixed on SMC/DMC type insulators & colour coding with heat shrinkable PVC sleeves. c) 1 set- Digital Volt meter (0 - 500V) with in-built selector switch and 3 Nos SP AC control MCBs-2A of approved make for 3-phase supply including making connections with lugs, testing etc. d) 1Set- Digital Ammeter with built-in selector switch 3 Nos. CTs 125/5A for 3 phase supply including making connections with lugs, testing etc. e). 1set- Suitable size TP&N Input Terminals to receive XLPE Copper/ Al. cable of 1.1KV grade for incoming circuit. OUTGOING: a) 2 Nos.- quick make and quick break 3 Pole current limiting MCCB- 63 Amp., 35 KA with adjustable O/L setting & Thermal Magnetic Release and conforming to IS:13947-2/ IEC 60947-2 with front face and centralized adjustable, line load inter changeability including making connections with lugs/ spreaders etc. as required..(Preferable make: Seimens, Havells, Scheider, L&T, GE) b). 2 sets- Suitable size TP&N Terminals to receive XLPE Copper/ Al. cable of 1.1KV grade for outgoing circuits.
