Tender For Construction Of Nurse Station Cabin Labour Room Postnatal Ward 10 Beds Toilets In Kallapalli
Tender Value
Ref. Documents
Estimated cost
Bid Submission
31 Jul 2023
0 days left
EMD
30000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
krishnarayapuram → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Nurse Station Cabin Labour Room Postnatal Ward 10 Beds Toilets In Kallapalli
BOQ
| Sl. No. | Item Description |
| 1 | Name of the Work :Condtruction of Nurse Station (Cabin), Labour Room, Postnatal Ward (10 beds), Toilets in VEPPANGUDI H/O Sivayam pt |
| 2 | Earth work excavation for foundation in all clauses of soils and sub soils to full depth asmay be directed except in hard rock requiring blasting but inclusive of shoring struttingand boiling out water whenever necessary et complete |
| 3 | Cement Concrete 1:4:8 (One Cement, Four M.Sand and eight hard broken stone jelly)using 40 mm gauge hard broken granite stone jelly for foundation including dewateringwherever necessary and laid in layers of not more than 15 cm thick, well rammed,onsolidated and curing etc. complete complying with standard specification |
| 4 | Collection and supply of gritty gravel from appd quarry including cost and conveyance ofall materials to site including all labour charges for filling etc.complete, |
| 5 | Brick work using country bricks of size 83/4\"x41/4\"x23/4\" in cement mortar 1:5 (Onecement and five M.Sand) including curing neat finishing, etc., complete complying withstandard specifiction. |
| 6 | Supplying and erectering for sides and soffits including supports and strutting upto 3.29m.Ht for plain surface including struting etc.,complete. |
| 7 | Supplying and erectering steel conteering for round columm |
| 8 | AGL-LINTEL |
| 9 | Supplying fabricating and placing in position of ribbed steel rods for reinforcement to all RCC works as per the design given including cost of steel and binding wire also in allfloors etc., complete |
| 10 | Reinforced Cement Concrete 1:1-1/2:3 (One Cement, One and a half crushed stone M.Sand and Three hard broken stone jelly) using 20 mm gauge hard broken granite stone jelly for all RCC items of works excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary and bearing surfaces of walls, beams etc. shall be finished smooth with Cement Mortar 1:3 (One Cement and Three M.Sand) and kraft paper laid over it without claiming extra, etc., complete complying with standard specification and as |
| 11 | Plastering with cement Morter 1:5 12mm thick in all floors including curing etc.,PorticoSeptic tankcomplete complying with standard specification and as directed.rials and labour charges |
| 12 | Special ceiling plastering and finishing the exposed surface of all RCC items of work suchas slabs, beams, sunshades, facia, canopy slab, staircase waist slab, landing slab etc., with Cement Mortar 1:3 (One Cement and Three M.Sand) 10mm thick including hacking the surfaces, providing cement mortar nosing, beading for sunshades, staircases, steps, landing slabs and curing, etc., in all floors complying with standard specification and as directed by the departmental officers |
| 13 | Pastering with cement mortar 1:4mix to 20 mm thick includingcost and conveyance of allmaterials to site and all labour |
| 14 | Paving the floor with best quality Vetrified Tiles of size 600 x 600 x 8mm of approvedcolour, shade and quality laid in cement mortar 1:3 (one cement and three M.Sand) 20mm thick in all floors and the top pointed with the white cement mixed same colourpigments etc, complete complying with standard specification. (The make and brand ofthe tiles should be got approved by Executive Engineer before use on works) |
| 15 | White washing two coats using shell lime including cost and conveyance of all materialsto site and all labour charges etc |
| 16 | White washing two coats using shell lime including cost and conveyance of all materialsto site and all labour charges etcFlooring with following ceramic tiles of size 305 x 305 x 6 mm laid over 20 mm thick ent mortar 1:3 (One Cement and Three M.Sand) base mortar over the existing slab/ floor including cutting the tiles to the required size with special cutter wherever necessary, laying in position and pointing with white cement mixed with colouring pigment at the rate of 0.3 Kg./ sq.m. etc., complete complying with standard specification. (The make and brand of the tiles should be got approved by Executive |
| 17 | Dadooing walls with following best approved quality, white / colour glazed tiles of following sizes set in Cement Mortar 1:2 (One Cement and Two crushed stone M.Sand) 10mm thick and pointing the joints with white cement mixed with colouring pigments at the rate of 0.40 Kg./ sq.m. neatly in all floors, curing, etc., complying with standard specification and as directed by the departmental officers. |
| 18 | Distembering two coats with best approved distember including ncost and conveyanceof all materials and and all labour charges etc complete. |
| 19 | Painting two coats of approved Exterior emulsion paint over one priming coat of oldwall surface Including cleaning preparing the surface and curing etc complete. Outer alround |
| 20 | Painting two coats of new iron works such as steel doors, Window, Ventilators, Window bars Balustrdes etc., with best approved first quality of synthetic enamel paint of approved colour over the existing priming coat etc., complete complying with standard specifications etc., |
| 21 | Manufacturing supplying and fixing of steel door with the following specification MSangels of size 40x40x6mm are used for the outer frames and M.S. angles of size 35x35x5mm for the shutter frames stiffeners with 32 x 6mm M.S flat is provided at required intervals in the shutter frame. 18-gauge C.R. sheet laid as panel in the shutter and welded intact. M.S. flat 18x5mm is welded over the 32 x 6mm M.S. flat M.Sandwitching the C.R. sheet in between additional stiffeners with 18x5mm M.S. flat is provided diagonally at the rear side of the shutter, 3nos. of hinges in case of single leaf |
| 22 | Manufacturing, supplying and fixing in position of steel windows with the following specifications. Outer frames of windows made of \"Z\" section F7D of size 33 x 25 x 3mm at 4194g/m and mullion \"J\" section (F4B) of size 46 x 25 x 3mm at 2.28kg/m and shutter on of made of F70 of 33 x 25 x 3mm at 1.419kg/m as specified in IS 7452/1990. ach Jenable shutter should not exceed a width of 600mm to enable separate operations and easy maintanenance. The panel of the shutters to be covered with 18 gauge cold rolled |
| 23 | Supply of Following materials For Water Supply 32 mm Pipe 10 Ksc |
| 24 | 20mm Waste Not Tap |
| 25 | Supplying and fixing in positon Indian Water Closet (Oriya type) of size 580 x 440mm white glazed earthern ware of approved quality and brand with \"P\" or \"S\" trap conforming |
| 26 | Europeon Water Closet with all fittings and 10lit capacity flusing tank |
| 27 | Supply and delivery and fixing of HDPE tank as per IS 12701/1996 including loading,unloading, transportation and labour charges for fixing of the GI pipes and specials forpipe connection works including cutting, threading and fixing charges etc., |
| 28 | Supplying and fixing in position best quality and approved make Indian made white colour glazed earthernware wash hand basin of size 550 x 400mm (with pedestal / hout pedestal) with a pair of cast iron brackets, including cost 15mm dia brass CP pillar 32mm dia \"8\" class Gl waste pipe with rubber plug and chain, 15mm dia GM wheel wave, 15mm brass nipple, 15mm dia nylone connection, 32mm dia CP brass waste coupling including fixing of wash basin using CI brackets on to the wall in position with TW plugs and screws, rubber washers, white lead and giving necessary water supply connection and painting the brackets with two coat of painting over a priming coat of anti corrosive paint including testing for leakages etc., complete complying with standard specification and as directed by the departmental officers. (The wash hand basin and specials should be got approved by the Executive Engineer before use on works). |
| 29 | Provision for PVC 110mm dia Rain Water down fall Pipe |
| 30 | Supply and fixing of Electrical ArrangementsLight & Fan point SD 17 |
| 31 | Plug Paint SD 36 |
| 32 | Light fittings 4\" 18W Crystal Glass LED Tube Light Fitting SD NO 87 |
| 33 | Ceiling Fan Fitting SD 106 |
| 34 | Service wire SD 64 |
| 35 | GST Amount for providing Service to Government Contract Works for the above ConstructionWorks.GST Amount is the Total GST Amount for overall quoted amount above this row in column \"BB\" for all works in this package}(Refer Clause 13.2 & 13.3 of Section 2 of Instruction to Bidders (ITB) of SBD) |
AI Tender Summary
Tender Timeline
Jul 25, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedJul 31, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJul 31, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender