Tender For Construction Of 100000 Ltr Oht (7.50 M Staging) At Ponnegoundanpudur H-O Mgc Palayam Panchayat Annur Union In Coimbatore District Under 15Th Finance Commission 2021-2022 -Package No- Tn 01-Mgc Palayam
Tender Value
Ref. Documents
Estimated cost
Bid Submission
31 Jul 2023
0 days left
EMD
21440
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
annur → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of 100000 Ltr Oht ( 7.50 M Staging ) At Ponnegoundanpudur H-O Mgc Palayam Panchayat Annur Union In Coimbatore District Under 15Th Finance Commission 2021-2022 -Package No- Tn 01-Mgc Palayam
BOQ
| Sl. No. | Item Description |
| 1 | Construction of 100000 ltr OHT (7.50 M Staging) at Ponnegoundanpudur H/O MGC Palayam Panchayat Annur union in Coimbatore District under 15th Finance Commission 2021-2022 -Package No. TN 01-MGC Palayam |
| 2 | Earthwork excavation and depositing on bank with an initial lead of 10m and lift of 2m in the following classification of soils.Hard stiff clay black cotton, hard red earth, shales, murram, ordinary gravel, stoney earth and earth mixed with small size boulders for foundation SS 20B. |
| 3 | Cement Concrete 1:4:8 (One cement, four sand and eight aggregates) using 40mm HBG stone for levelling course for foundation including the cost of mixing concrete, ramming, curing etc., complete.. |
| 4 | Supplying and erecting steel centering for sides and soffits including necessary supports and shuttering to the required height for RCC items using MS sheets or susitable size of BG.10 stiffened with welded MS angles of size 25mm x 25mm x 3mmof boarding, laid over silver oak joints of size 10cm x 6.5cm spaced at 90cm centre to centre and supported by casurina props of 10cm to13cm dia spaced at 75cm centre to centre complying with standard specifications etc. complete.(Plane Surface GL to 3.30m) |
| 5 | A) PLANE SURFACE |
| 6 | Below Ground level and upto 3.30m above ground level |
| 7 | 3.31m to 4.30m above ground level |
| 8 | 6.31m to 7.30m above ground level |
| 9 | 10.30 to 11.30m above ground level |
| 10 | Supplying and erecting steel centering for sides and soffits including necessary supports and shuttering to the required height for RCC items using MS sheets or susitable size of BG.10 stiffened with welded MS angles of size 25mm x 25mm x 3mmof boarding, laid over silver oak joints of size 10cm x 6.5cm spaced at 90cm centre to centre and supported by casurina props of 10cm to13cm dia spaced at 75cm centre to centre complying with standard specifications etc. complete.(Curved Surface 3.31m to 4.30m) |
| 11 | B)CURVED SURFACE |
| 12 | 6.31m to 7.30m above ground level |
| 13 | 7.31m to 8.30m above ground level |
| 14 | 8.31m to 9.30m above ground level |
| 15 | 9.31m to 10.30m above ground level |
| 16 | 10.31m to 11.30m above ground level |
| 17 | Supplying and erecting steel centering for sides and soffits including necessary supports and shuttering to the required height for RCC items using MS sheets or susitable size of BG.10 stiffened with welded MS angles of size 25mm x 25mm x 3mmof boarding, laid over silver oak joints of size 10cm x 6.5cm spaced at 90cm centre to centre and supported by casurina props of 10cm to13cm dia spaced at 75cm centre to centre complying with standard specifications etc. complete.(Curved Surface 6.31m to 7.30m) |
| 18 | C) SQUARE COLOUMN |
| 19 | Below Ground level and upto 3.30m above ground level |
| 20 | 3.31m to 4.30m above ground level |
| 21 | 4.31m to 5.30m above ground level |
| 22 | 5.31m to 6.30m above ground level |
| 23 | 6.31m to 7.30m above ground level |
| 24 | Supplying and erecting steel centering for sides and soffits including necessary supports and shuttering to the required height for RCC items using MS sheets or susitable size of BG.10 stiffened with welded MS angles of size 25mm x 25mm x 3mmof boarding, laid over silver oak joints of size 10cm x 6.5cm spaced at 90cm centre to centre and supported by casurina props of 10cm to13cm dia spaced at 75cm centre to centre complying with standard specifications etc. complete.(Square Column 0m to 3.30 m) |
| 25 | C) CIRCULAR COLOUMN |
| 26 | Below Ground level and upto 3.30m above ground level |
| 27 | 3.31m to 4.30m above ground level |
| 28 | 4.31m to 5.30m above ground level |
| 29 | 5.31m to 6.30m above ground level |
| 30 | 6.31m to 7.30m above ground level |
| 31 | Supplying, fabricating and placing in position of HSD steel rods for reinforcement including the cost of steel and binding wire etc., complete.RTS rod |
| 32 | RCC 1:1.5:3 (One cement, one and half sand and three agreegates) using 20mm HBG stone excluding cost of reinforce ment, centering, shuttering strutting, but including cost of mixing concrete, placing, vibrating with mechanical vibrator, finishsing, curing etc., complete.(1.50m-4.50m below GL) |
| 33 | For works in 1.5m to 4.5m below Ground Level |
| 34 | For works in 0m to 1.50m below Ground level |
| 35 | For works in 0m to 4.5m above Ground level |
| 36 | For works in 4.51m to 7.32m above Ground level |
| 37 | For works in 7.33m to 10.98m above Ground level |
| 38 | painting two coats with Approved emulsion over one priming coat of emulsion over cement plastered wall surface and celing etc.., complete |
| 39 | Fabrication, supply, deliveryat site and fixing in position ofMS ladderwith easy inclinationin two parts with width45cmmade out of 50mm x 50mm x 6mm MS angleusing 16 mm dia round bar at 30cm centre to centreassteps with handrails at the top for2.00m inclined height and also withnecessary projecting arms at the top and bottomfor proper resting with one coat of red oxide paint , loading,transit,unloading, insurance charges, taxes etc., complete as directed by the TWAD Board officers. The rate includes concrete bed block in CC 1:3:6using 20mm HBGS at top and bottom of suitable size with necessory anchor bolts . |
| 40 | Providing and fixing of RCC inner accesss ladder in RCC 1: 1.5:3 (one cement, one and half sand and three agreegate) using 20mm HBG stone for OHT including cost of reinforcement, placing grill in position, centering shuttering charges, mixing concrete curing etc., to required height and clear width of 45cm consisting of two Nos. of vertical post of 10cm x 15cm and step slab of 25mm x 25mm etc. complete. |
| 41 | Providing PVC ventilating arrangements mosquito proof nylon net with 110mm PVC cowl and as directed by the departmental officers. |
| 42 | Providing manhole cover SFRC of size 0.60 x 0.60M inMS angle fixed along edges and as directed by Deptal officers |
| 43 | Provision for pipe connection arrangements for inlet, outlet, scour and overflow etc., including cost of pipes, specials, valve, labour charge for lifting, aligning, cutting, threading, fixing and painting of GI pipes with two coats of approved quality enamel paint etc. complete as detailed below.(80mm dia GI Pipe for Inlet) |
| 44 | Provision for pipe connection arrangements for inlet, outlet, scour and overflow etc., including cost of pipes, specials, valve, labour charge for lifting, aligning, cutting, threading, fixing and painting of GI pipes with two coats of approved quality enamel paint etc. complete as detailed below.(80mm dia GI pipes for over flow & rain water harvesting pipe) |
| 45 | Provision for pipe connection arrangements for inlet, outlet, scour and overflow etc., including cost of pipes, specials, valve, labour charge for lifting, aligning, cutting, threading, fixing and painting of GI pipes with two coats of approved quality enamel paint etc. complete as detailed below.(80mm dia GI pipe for delivery pipe) |
| 46 | Provision for pipe connection arrangements for inlet, outlet, scour and overflow etc., including cost of pipes, specials, valve, labour charge for lifting, aligning, cutting, threading, fixing and painting of GI pipes with two coats of approved quality enamel paint etc. complete as detailed below.(80 mm dia GI Coupler) |
| 47 | Provision for pipe connection arrangements for inlet, outlet, scour and overflow etc., including cost of pipes, specials, valve, labour charge for lifting, aligning, cutting, threading, fixing and painting of GI pipes with two coats of approved quality enamel paint etc. complete as detailed below.(80 mm dia GI Union) |
| 48 | Provision for pipe connection arrangements for inlet, outlet, scour and overflow etc., including cost of pipes, specials, valve, labour charge for lifting, aligning, cutting, threading, fixing and painting of GI pipes with two coats of approved quality enamel paint etc. complete as detailed below.(80 mm dia GI Elbow) |
| 49 | Provision for pipe connection arrangements for inlet, outlet, scour and overflow etc., including cost of pipes, specials, valve, labour charge for lifting, aligning, cutting, threading, fixing and painting of GI pipes with two coats of approved quality enamel paint etc. complete as detailed below.(65 mm dia Gate Valve) |
| 50 | GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column \"BB\" for all works in this package} |
AI Tender Summary
Tender Timeline
Jul 25, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedJul 31, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJul 31, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender