Public Health Engineering Department-PHED has published Tender For Supplying And Commissioning Of Automated Water Quality Monitoring System Including Improvement In Chemical Dosing System Of 3Nos Water Treatment Plant At Koraput Municipality Under State Plan For The Year 2023-24. Submission Date for this Tender is 04-08-2023. Dosing Pump Tenders in koraput Odisha. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | (Part-A) Automated water quality monitoring system |
2 | Supplying of online turbidity indication controler cum analyzer as per following specification as P.H. laboratory including cabling, transportation, installation and commissioning etc.all complete Make :- Endress Houser/ Microset/ Thermo Scientific) i) Range - 0 to 4000 NTU ii) Working temp, 0 to 60 DEG C iii) Output - 4 - 20 Ma iv) Set point 05nos (High low) v) 2 groups of ON/ OFF relay control vi) Protection level IP65 vii) Services for 5 years |
3 | Supplying of PLC, electrical panel, instrumentation work as per following specification at P.H. laboratory including all cost, transportation, installation & commissioning etc.all complete (Make :- Siemens/ Delta/ ABB) i) Programmable logical control (24V) ii) Ultrasonic level transmitter output signal 4-20 MA-1no (Make Siemens/ Baumer/ ABB) iii) Flow switch -2nos iv) Indication lamp v) DOL starter (1HP) -1no vi) Control panel :- Electrical & instrument panel, on-off, trip indication lamps, instrumentation enclosure boxes vii) Services for 5 years |
4 | PAC dosing system as per following specification at PH laboratory including all cost, transportation, installation & commissioning etc.all complete i) FRP dosing tank 1000x2 liters, vertical cylindrical, closed bolted top cover with hinges (Make- Sintex/ Storewell/ Mouli) ii) Agitator impeller swing dia/ No. of impeller : 350mm-2 nos with agitator gear box. iii) Dosing pump : Mechanical deaphragm operated metering pump, contimous duty, capacity 0 to 120 LPH (Make :- Grunfor/ Wilo/ KSB) iv) Flow control valve (UPVC) - 1no v) Rotameter inlet line, vertical 0-1200 LPH (Transparent tube) -2nos. vi) Solenoid valve - 2nos strainer for inlet line vii) Ball valve, piping within the skid viii) Fitting, flanges, union, gaskets ix) Level gauge indicator x) Service for 5 years |
5 | Automation for PAC dosing system as per following specification at P.H. laboratory, Koraput including all cost, transportation, installation & commissioning etc.all complete. i) IOT profinet connection, net biter + HSM system (Make- Siemens/ Delta/ Endress houser) ii) Netbitter software + mobile application iii) Flow adjustment of pump by VFD auto made iv) Interlocking of level transmitter to dosing pump & solenoid valve. v) Water inlet on-off provision will be provided inbuilt control panel. vi) Ethernet provision in PLC for communication with client DCS system. vii) VFD for pump - 1 set (Make - Siemens/ ABB / Delta) viii) MCB contactors, switch gear (Make - Siemens/ ABB/ Delta) ix) Services for 5 years |
6 | (Part-B) Construction of Auto Chemical dosing unit room - 2.nos of size 6.00 x 3.00 |
7 | Earth work in all kinds of soil within 50mtr initial lead and 1.5mtr initial lift including rough dressing and breaking of clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3mtr in depth as per direction of Engineer-in-charge. |
8 | Filling foundation and plinth with sand watered and rammed |
9 | Cement concrete (1:4:8) with 4cm size hard granite metal. |
10 | Rigid and smooth centering and shuttering for R.C.C. works including false works and dismantling them after casting including cost of materials complete in ground floor. |
11 | i) Column base |
12 | ii) Wall top beam |
13 | iii) Roof & chajja |
14 | iv) Lintel |
15 | Cement concrete (M-20) for R.C.C. works with 20mm size hard granite chips including hoisting and laying. |
16 | M.S. Reinforcement for R.C.C. works including cutting,bending, binding and tying grills and placing in position including cost of M.S.Rods, binding wire 18 to 20 gauge. |
17 | 2.5cm thick damp proof course with C.C. (1:2:4) using 12mm size hard broken granite chips. |
18 | Brick work with C.B. bricks having crushing strength not less than 35kg/sqm in cement mortar(1:6) in foundation and plinth. |
19 | i) 1st footing |
20 | ii) Superstructure |
21 | 20mm. thick C.P. in cement mortar(1:4) for b/w. |
22 | 12mm. thick C.P. in cement mortar (1:3) for brick work. |
23 | Cement concrete(1:2:4) with 12mm size hard granite chips. |
24 | Fixing Granite in floors or steps & landing on 25mm. thick bed of CM (1:1) jointed with neat cement slurryincluding rubbing & polishing (Granite upto 0.10sqm.(10mm. Thick)) |
25 | Providing fitting, fixing of ACP Aluminum composed panel including required Aluminum framewith all necessary fittings as per specification and direction of E.I.C |
26 | Supplying, fitting & fixing up window (sliding type) made up aluminium section 9778 as window frame section No. 4095, 4096 and 9777, 3994 as shutter frame with 5mm. thick plain glass as panel fitted with rubber bending including lucking arrangement including all fittings including cost of materials all taxes, labour, T & P excluding cost of glass etc complete as per direction of Engineer in Charge. |
27 | Fabricating, Supplying and fixing of M.S window grill made out of M.S flat 20mm x 4mm including labour charge for fixing etc complete |
28 | Painting two coats with approved Enamel paint in new or old iron work |
29 | Priming one coat with any approved primer |
30 | Distempering two coats with any approved shade. |
31 | Painting two coats with approved weather sealcoatin Plaster surface |
32 | Filling foundation and plinth with excavated materials(in all kinds of soil) |
33 | Supplying all materials, labour and T&P and laying in trenches, unplasticized PVC pipes conforming to [ASTM-D-1785/89,Sch-80],the following nominal diameter and fittings including testing as per specification all complete. |
34 | i) 25mm.dia PVC pipe [ Sch-80.] |
35 | ii) 15mm.dia PVC pipe [ Sch-80.] |
36 | Supplying all materials,labour and T&P for fixing M.S Angle for supporting for GCI sheet including febrication work, cutting, weling, drilling with required nut bolt, wahser, including painting etc. Complete as per specification and direction of E.I.C (i) 90mm M.S. Angle - 6mm thick, (ii) 50mm M.S. Angle - 6mm thick) & (iii) 25mm M.S. flat |
37 | Supplying all materials,labour and T&P for fixing G.C.I. sheet (Colour) in roof drilling holes in wind ties including fixing of ridges valleys wind ties etc. complete. |
38 | Supplying all materials, labour and T&P for concreting with welding the base of 3" angle for anchoring as per specification and direction of E.I.C |
39 | Site development. |
40 | Earth work in all kinds of soil within 50mtr initial lead and 1.5mtr initial lift including rough dressing and breaking of clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3mtr in depth as per direction of Engineer-in-charge. |
41 | Filling foundation and plinth with sand watered and rammed |
42 | Cement concrete (1:4:8) with 4cm size hard granite metal. |
43 | Cement concrete(1:2:4) with 12mm size hard granite chips. |
44 | Rigid and smooth centering and shuttering for R.C.C. works including false works and dismantling them after casting including cost of materials complete in ground floor. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail