Tender For Repairs To Phc Sub Center, Delivary Room And Toilet Block At. Varud Tal. Bhoom Dist. Osmanbad
Tender Value
5.87 Lakhs
Estimated cost
Bid Submission
07 Aug 2023
0 days left
EMD
5871
Bank guarantee accepted
Document Fee
200
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
warud → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Repairs To Phc Sub Center, Delivary Room And Toilet Block At. Varud Tal. Bhoom Dist. Osmanbad As Per Boq
BOQ
| Sl. No. | Item Description |
| 1 | Item No.1: Removingdoorsandwindowswithframesandstackingthematerialsasdirectedwithall leads, lifts etc. complete. (SSR 2022-23 I.No. 46.15) |
| 2 | Item No.2: Removing cement tiles, or marble or polishedshahabad floor or dado without bed concrete including stacking the materials as directed with all leads, lifts etc. complete (SSR 2022-23 I.No. 46.19) |
| 3 | Item No.3: Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removingtheexcavatedmaterialuptoadistanceof50m.beyondthebuildingareaand stackingandspreadingasdirected,dewatering,preparingthebedforthefoundationand necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means (SSR 2022-23 I.No. 21.02) |
| 4 | Item No.4: Supplying hard murum/ kankar at the road site, including conveying and stacking complete. (SSR 2022-23 I.No. 2.29a) |
| 5 | Item No.5: Spreading hard murum/ soft murrum/ gravel or kankar for side width complete (SSR 2022-23 I.No. 2.30) |
| 6 | Item No.6: ProvidingandlayingCastinsitu/ReadyMixcementconcreteinM-10oftrap/granite/ quartzite/gneissmetalforfoundationandbeddingincludingbailingoutwater,Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided,finishingifrequiredandcuringcomplete,withfullyautomaticmicroprocessor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete.With fine aggregate (Crushed sand VSI Grade) (SSR 2022-23 I.No. 24.01) |
| 7 | Item No.7: Providinguncoursedrubblemasonryoftrap/granite/quartzite/gneissstonesincement mortar1:6infoundationandplinthofinnerwalls/inplinthofexternalwallsincluding bailing out water manually , striking joints on un exposed faces and watering etc.complete. (SSR 2022-23 I.No. 28.01) |
| 8 | Item No.8: Providing secondclassBurntBrickmasonrywithconventional/I.S.typebricksincement mortar1:6insuperstructureincludingstrikingjoints,rakingoutjoints,wateringand scaffolding etc. Complete (SSR 2022-23 I.No. 27.05) |
| 9 | Item No.9: ProvidingandlayingCastinsitu/ReadyMixcementconcreteM-20oftrap/granite /quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or asdirectedincludingsteelcentering,formwork,coverblocks,laying/pumping, compactionandrougheningthesurfaceifspecialfinishistobeprovidedandcuringetc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) (SSR 2022-23 I.No. 25.50) |
| 10 | Item No.10: ProvidingandlayingCastinsitu/ReadyMixcementconcreteM-20oftrap/granite/ quartzite/ gneiss metal for R.C.C.slabs andlandingsasper detaileddesigns anddrawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) (SSR 2022-23 I.No. 25.70) |
| 11 | Item No.11: Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C.pilecaps,footings,foundations,slabs,beamscolumns,canopies,staircase,newels, chajjas,lintelspardis,copings,fins,archesetc.asperdetaileddesigns,drawingsand schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. (SSR 2022-23 I.No. 26.33) |
| 12 | Item No.12: Providing and fabricating structural steel work in rolled sections like joists, channels, angles, teesetc.asperdetaileddesignanddrawingsorasdirectedincludingcutting,fabricating, hoisting,erecting,fixinginpositionmakingriveted/bolted/weldedconnectionswithout connecting plates, braces etc. andincluding one coat of anticorrosive paint andover ittwo coats of oil painting of approved quality and shade etc. complete. (SSR 2022-23 I.No. 23.01) |
| 13 | Item No.13: Providing andfixing colourcoatedZincalume (R)AZ150(min150gms/sq.mt.totalon each side ) profiled sheets for roofing. The feed material is manufactured out of nominal 0.45 mm Base Metal Thickness ( BMT ) (0.5 mm TCT ), Hi-strength steel with min.550 MPa yield strength,metallichotdipcoatedwithAluminium-Zincalloy(55%aluminium 43.4%zinc 1.6% silicon) with COLORBOND ( R ) steel quality super durable polyester paint coat ( with inorganicpigment).Thepaintshallhaveatotalcoatingthicknessofnominal35um, comprising of nominal 25 um exterior coat on top surface and nominal 10 um reverse coat on back surface. Profile sheet shall have nom. 950-1050 mm effective cover width and nominal 25-30 mm deep ribs with subtle square fluting in the five pan at nominal 180-250 mm center- to-center.The endribshallbedesignedforanti-capillarygroove.andreturnleg.Thefeed material should have coil manufacturers product details marked a regular interval. Including fasteners with min. fastened with min. 25 um Zinc-Tin alloy coated, Hex head, self-drilling screw etc. complete. (weight of profile 4.52 Kilogram/ One Square Metre) (SSR 2022-23 I.No. 38.34) |
| 14 | Item No.14: Providing and fixing mild steel grill work for windows, ventilators etc. 20 Kilogram/ One Square Metre asperdrawing including fixtures,necessarywelding andpainting withone coatsof anticorrosive paint and two coats of oil painting complete. (SSR 2022-23 I.No. 40.01) |
| 15 | Item No.15: Providingandfixingcoldrolledsteelhollowdoorframe105mmx60mmforanysizes including holdfasthinges, tie members withredoxide andgray paint etc.complete asper I.S.I.specificationsandcodeofpracticeprescribedincludinganticorrosivetreatmentas directed by the engineer. (SSR 2022-23 I.No. 39.49) |
| 16 | Item No.16: Providing and fixing M.S. grill door 24 Kilogram/ One Square Metre of various size as per detailed drawings without hot dip coating, iron fixtures and fastenings and 3 coats of oil painting etc (SSR 2022-23 I.No. 39.31) |
| 17 | Item No.17: Providing and fixing solid core flush door shutter in single leaf 32 mm thick decorative type of exterior grade as per detailed drawings approved face veneers 3 mm thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium platedfixturesandfastenings,withbrassmortiselock,chromiumplatedhandlesonboth sides, and finishing with French Polish etc. complete. (SSR 2022-23 I.No. 39.09) |
| 18 | Item No.18: Providing and fixing in position powder coated aluminium louvered windows / ventilator of varioussizeswithpowdercoatingasperdetaileddrawingandspecificationsincluding aluminiumframes80x38mmx1.22mmboxtype,5mmthicksheetglasslouvers,of approved quality etc. complete. (SSR 2022-23 I.No. 39.68) |
| 19 | Item No.19: Providing andfixing in position(as per 1868 / 1982) Alluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90 mm at weight 0.637 Kilogram/One Running Metre. with window frame bottom track section 92 x 31.75 x 1.30 mm at weight 1.070 Kilogram/One Running Metre.. Top and side track section 92 x 31.75 x 1.30 mm at weight 0.933 Kilogram/Runningmetre.Theshuttershouldbeofbearingbottom40x18x1.25mmat weight 0.417Kilogram/One Running Metre.Inter locking section 40x 18x 1.10mm atweight0.469Kilogram/Runningmetre.andhandleandtopsection40x18x1.25mm atweighto.417Kilogram/Runningmetre.Asperdetaileddrawingsandasdirectedby Engineerincharge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mmthickplainglassandaluminiummosquitonetshutterwithstainlesssteeljailwithall required screws and nuts etc, complete. With colour Anodising with box (SSR 2022-23 I.No. 39.41) |
| 20 | Item No.20: Providing and laying Antiskid Ceramic tiles of approved qualityof size 30 cm x 30 cm and confirming to IS 15622-2006 (Group-B IIA) for antiskid flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with cement slurry cleaning curing etc. complete. (SSR 2022-23 I.No. 33.67) |
| 21 | Item No.21: Providing and laying ceramic tileshaving size 30 cm. x 45 cm. confirming to correspondingI.S. for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. complete. (SSR 2022-23 I.No. 33.26) |
| 22 | Item No.22: Providingandlayingtelephoneblack/AmbaWhite/Cadburybrown/Rubyred/Ocean Brown granite stone of 18 to 20 mm thick for door frame/ dado/ window boxing etc. On C.M. 1:6 including filling joints with polymer base filler nosing/moulding the sharp edges wherever necessary, curing,etc. complete. (SSR 2022-23 I.No. 33.68) |
| 23 | Item No.23: Providing and laying vitrified matt fininsh tileshaving size 590 mm to 605 mm x to 605 mm of8to10mmthicknessandconfirmingIS.15622-2006(GroupBla)ofapprovedmake, shadeandpatternforflooringinrequiredpositionlaidonabedof1:4cementmorar including neat cement float, filling joints, curing and cleaning etc. complete. (SSR 2022-23 I.No. 33.42) |
| 24 | Item No.24: Providinginternalcementplaster12mm thickinsinglecoatincementmortar1:4without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. (SSR 2022-23 I.No. 32.04) |
| 25 | Item No.25: Providing internal cement plaster 20mm thick inSingle coats in cement mortar 1:5without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc. complete (SSR 2022-23 I.No. 32.06) |
| 26 | Item No.26: Providing andapplying Twocoats ofwall care Putty onplastered surface andCeiling and Walls to prepare surface even and smooth of approved make, etc complete. (SSR 2022-23 I.No. 32.34) |
| 27 | Item No.27: Providing and fixing European type white glazed earthenware water closet pan with UPVC seat and lid with chromium plated brass hinges and rubber buffers including UPVC and vent pipe up to the outside face of wall without flushing cistern with flush cock and with water Jet and necessary fittings including cutting and making good to the walls and floors testing etc. complete.( prior approval of sample and brand by Ex. Engineer is necessary before use) (SSR 2022-23 I.No. 43.20) |
| 28 | Item No.28: Providing and fixing coloured glazed earthenware Wash Hand Basin of 55cm x 40 cm size including cold water pillar tap/cold and hot water pillar tap brackets, rubber plugs and brass chain, stop tap and necessary pipe connection including P.V.C. waste pipe and trap up to the outside face of the wall. Making good the damaged surface, testing etc. complete. (SSR 2022-23 I.No. 41.66) |
| 29 | Item No.29: Providing and fixing H.D.P container one piece moulded water tank made out of high density polythyler and built corrugated inclusive of delivery up to destination hoisting andfixingofaccessoriessuchasinlet,outletoverflowpipeinclusiveofalltankscapacity between 200 to 1000 liters (SSR 2022-23 I.No. 42.53) |
| 30 | Item No.30: Providing andfixing 10cm C.I.NahaniTrapincludingC.I.gratingbendandpiece ofC.I. pipe upto the outside face of the wall complete.(SSR 2022-23 I.No.41.80) |
| 31 | Item No.31: Providing , laying and fixing ,jointingEco- drain 110 mm SN 8 Nu- Drain Upvc pipes or of equivalent make, manufacture as per EN 13476 or equivalent as per I.S.15328 with fittings such a bends, tees, coupler, etc, jointing with rubber lubricant including necessary excavation, trench refilling with selective excavated material etc. complete.(SSR 2022-23 I.No.43.30) |
| 32 | Item No.32: Providingandfixing75mmdiastabiliserpipe/P.V.C.soilvent/wastepipeandwith necessary fixtures andfitting such as bends, tees, single junctions, slotted vent, clamps etc.complete(SSR 2022-23 I.No.42.51) |
| 33 | Item No.33: Providing and fixing on walls/ ceiling/ floor 15 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. (SSR 2022-23 I.No.42.55) |
| 34 | Item No.34: Providing andfixing onwalls/ceiling/floor 20mm dia.CPVC pipe withnecessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. (SSR 2022-23 I.No. 42.56) |
| 35 | Item No.35: Providing and fixing 15 mm dia. screw down bib/ stop tap of brass including necessary socket union nut complete. (SSR 2022-23 I.No.41.40) |
| 36 | Item No.36: Providingandlayingdampproofcourse50mmthickinM20cementconcretelayerand bitumen / using cement with waterproofing compound curing, formwork etc. complete. (SSR 2022-23 I.No. 31.01) |
| 37 | Item No.37: Providing and applying plastic emulsion paint of approved quality, colour and shade to old andnewsurfacesintwocoatsincludingscaffolding,preparingthesurface.(excludingthe primer coat)etc. complete. (SSR 2022-23 I.No. 36.12) |
| 38 | Item No.38: Providing and applying two coats of exteriorweather shield paint of approved manufacture andofapprovedcolourtotheplasteredsurfacesincludingcleaning,preparingtheplaster surface ,applying primer coat ,scaffolding if necessary, and watering the surface for two days etccomplete.(SSR 2022-23 I.No. 35.26) |
| 39 | Item No.39: ProvidingandfixingheavydutyinterlockingconcreteColouredpavingblocksof60mm thickness of having a strength of 300 Kilogram/Sq.cm. of approvedquality andshape ona bed of crushed sand of 25 to 30 mm thick including skirting joints and cleaning etc. complete (SSR 2022-23 I.No. 33.51) |
| 40 | Total in Figures- Part A |
| 41 | Item No.40: Charges for testing of material in vigilance & quality control laboratory For Concrete Compressive Strength OF C.C. Cube (Set of 3 cubes). |
| 42 | Item No.41: Charges for testing of Material in Vigilance and Quality control Laboratory etc Complate. for Paver Block |
| 43 | Item No.42: Royalty Charges a) For sand = Royalty + surcharge (2%) + Distt. Mineral Foundation Cess (10%) = 211.95+4.23+21.19 = 237.37 Per CumAs per SSR 2022-23 Section V Page No.3 |
| 44 | Item No.43: Royalty Charges b) For All Other Minerals = Royalty + surcharge (2%) = 211.95+4.23 = 216.18 per cumAs per SSR 2022-23 Section V Page No.3 |
| 45 | Total in Figures Part |
AI Tender Summary
Tender Timeline
Jul 24, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedAug 07, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedAug 08, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender