Maintenance Of Gachirampara L.I Scheme Under Gachiramparaadc Village Of Dasda Rd Block Under Water Resource Sub-Divison, Kanchanpur , North Tripura During The Year 2023-2024.Sh:- Remodeling Of Upvc Distribution System Etc..
Tender Value
5.20 Lakhs
Estimated cost
Bid Submission
16 Aug 2023
0 days left
EMD
10414
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
kanchanpur → Tripura
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Maintenance Of Gachirampara L.I Scheme Under Gachiramparaadc Village Of Dasda Rd Block Under Water Resource Sub-Divison, Kanchanpur , North Tripura During The Year 2023-2024.Sh:- Remodeling Of Upvc Distribution System Etc..
BOQ
| Sl. No. | Item Description |
| 1 | Providing, fixing and laying fabricated UPVC end cap conforming to IS : 10124 (Part 4) with solvent cementconforming to IS : 14182 including testing of joints complete as perCPWD specification and direction of the Engineer - in - charge.a) 90 mm dia |
| 2 | b) 110 mm dia |
| 3 | c) 140 mm dia |
| 4 | d) 160 mm dia |
| 5 | Providing, fixing and laying fabricated UPVC straight reducer conforming to IS : 10124 (Part 3) with solvent cementconforming to IS : 14182 including testing of joints complete as per CPWD specification and direction of the Engineer - in - charge.a) 110 x 90 mm dia |
| 6 | b) 140 x 110 mm dia |
| 7 | c) 140 x 90 mm dia |
| 8 | d) 160 x 140 mm dia |
| 9 | Providing & fixingC.I. sluice valve (with CAP)completewith bolts, nuts, rubber indertions etc. ( the tail piece if required will be paid separetely ) as per CPWD specification and direction of the Engineer-in-charge. a) 100 mm dia PN-1.6 |
| 10 | b) 125 mm dia PN-1.6 |
| 11 | c) 150 mm dia PN- 1.6 |
| 12 | d) 200 mm dia PN-1.6 |
| 13 | e) 250 mm dia PN-1.6 |
| 14 | Constructing masonry Chamber 90 x 90 x 100 cm, inside with brick work in cement mortar 1 : 4 ( 1 cement : 4 fine sand ) for sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside ) with chained lid and RCC top slab 1 : 2 : 4 mix ( 1 cement : 2 fine sand:4 graded stone aggregate 20 mm nominal size ) necessary excavation foundation concrete 1 : 5 : 10 ( 1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1 : 3 ( 1 cement : 3 fine sand ) 12 mm thick finished with a floating coat of neat cement complete as per standard design, CPWD specification and direction of the Engineer - in - charge.A. With 1st class bricks. |
| 15 | Providing & fitting fixing MS tail piece with MS flange suitable for pipes complete as per CPWD Specification & direction of Engineer in-charge.a) 100 mm dia PVC Pipe |
| 16 | b) 125 mm dia PVC Pipe |
| 17 | c) 150 mm dia PVC Pipe |
| 18 | d) 200 mm dia PVC Pipe |
| 19 | e) 250 mm dia PVC Pipe |
| 20 | Providing and fitting fixing of different dia rigid UPVC unequal Tee (including earth cutting & backfilling all socketted) suitable for pipes as per IS specification of Working pressure 2.5/4.0 kg/sq.cm confirming to IS: 10124 (Part-V) as per CPWD Specification & direction of Engineer-in-charge.a) 315 x 315 x 250 mm dia |
| 21 | b) 315 x 315 x 200mm dia |
| 22 | c) 315 x 315 x 160 mm dia |
| 23 | d) 250 x 250 x 200mm dia |
| 24 | e) 250 x 250 x 160mm dia |
| 25 | f) 250 x 250 x 140 mm dia |
| 26 | g) 200 x 200 x 160 mm dia |
| 27 | h) 200 x 200 x 140 mm dia |
| 28 | i) 200 x 200 x 110 mm dia |
| 29 | j) 160 x 160 x 140mm dia |
| 30 | k) 160 x 160 x 110 mm dia |
| 31 | l) 160 x 160 x 90 mm dia |
| 32 | m) 140 x 140 x 110 mm dia |
| 33 | n) 140 x 140 x 90mm dia |
| 34 | o) 110 x 110 x 90 mm dia |
| 35 | Providing and fitting fixing of different dia rigid UPVC equal Tee (including earth cutting & backfilling all socketted) suitable for pipes as per IS specification of Working pressure 2.5/4.0 kg/sq.cm confirming to IS: 10124 (Part-V) as per CPWD Specification & direction of Engineer-in-charge.a) 90 x 90 X 90 mm dia |
| 36 | b) 110 x 110 X 110 mm dia |
| 37 | c) 140 x 140 X 140 mm dia |
| 38 | d) 160 x 160 X 160mm dia |
| 39 | Providing and fitting fixing rigid UPVC Reducing socket (one size lower at one end, both end socketted) suitable for pipes of Working pressure 2.5/4.0 kg/sq.cm. as per CPWD Specification & direction of Engineer-in-charge.a) 315x250 mm dia |
| 40 | b) 250x200 mm dia |
| 41 | c) 200x160 mm dia |
| 42 | d) 160x140 mm dia |
| 43 | e) 140x110 mm dia |
| 44 | f) 110x90 mm dia |
| 45 | Providing&fittingfixingrigidUPVCbend (30degree, 45degree, 60 degree,90 degree) for UPVC pipes as per IS specification of Working pressure 2.5/4.0 kg/sq.cm as per CPWD Specification & direction of Engineer-in-charge.a) 160 mm dia |
| 46 | b) 140 mm dia |
| 47 | c) 110 mm dia |
| 48 | d) 90 mm dia |
| 49 | Excavating trenches of required width for pipes, cables, etc.includingexcavationfor socketsand dressingof sidesramming of bottoms , depth minimum 1.25mincluding getting out the excavated soil and then returning the soil as required in layers not exceeding20cmindepthincludingconsolidatingeachdeposited layers by ramming watering etc. and disposal of surplus excavated soil as directed within a lead of 50 m as per CPWD Specification & direction of Engineer-in-charge.A) All kinds of soil.a) Pipe , cables etc. exceeding 75mm diabut not exceeding 160 mm dia . |
| 50 | b) Pipe , cables etc. exceeding 200 mm diabut not exceeding 315 mm dia . |
| 51 | Providing and fitting fixing of G.I hydrant suitable for PVC pipesas per standard specification complete as per direction of Engineer-in- charge (Rate excluding the cost of NTP controlvalve). 80 X 50 mm dia |
| 52 | Providing and fitting fixing of CI(Cast Iron) NTP control valve (40mm) suitable for fitting fixing with GI hydrant point as per CPWD Specification & direction of Engineer-in-charge. |
| 53 | Providing and laying different dia rigid UPVC pipes of Working Pressure 2.5 kg/4.0 kg/ sq.cm. complete with necessary coupler and solvent cement as per CPWD Specification & direction of Engineerin- charge.a) 90 mm dia |
| 54 | b) 110 mm dia |
| 55 | c) 140 mm dia |
| 56 | d) 160 mm dia |
| 57 | e) 200 mm dia |
| 58 | f) 250 mm dia |
| 59 | g) 315 mm dia |
| 60 | Providing and fitting fixing of M.S shore manifold made with 3mm thick MS sheet of size one way 315 mm dia & three way 125 mm dia made with suitable flange(all end) including coating with sheet primer (tailpiece if required will be paid separately) including proper alignment with pipe line & earth cutting ,backfilling complete as per direction of Engineer-in-charge. |
| 61 | Labour charge for laying of G.I pipe conforming IS 1161,3589 & 1239 including fitting fixing complete as per direction of Engineer-in-Charge.a) 125 mm dia |
| 62 | b) 150 mm dia |
| 63 | Supplying & fitting fixing of G.I bend of approved quality.a) 150 mm dia |
| 64 | b) 125 mm dia |
| 65 | Supplying & fitting fixing of 125 mm dia G.I bend of approved quality. |
| 66 | Providing & fitting fixing M.S flange (10mm thick) at site of work of approved quality.a) 150 mm dia |
| 67 | b) 125 mm dia |
| 68 | Providing & fitting fixing Rubber flange washer 6 mm thick at site of work of approved quality.a) 150 mm dia |
| 69 | b) 125 mm dia |
AI Tender Summary
Tender Timeline
Jul 24, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedAug 16, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedAug 16, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender