Military Engineer Services-MES has published Tender For Maintenance Repair Of Wooden Furniture Articles Under Ge(S) Bathinda At Bathinda Mil Stn. Submission Date for this Tender is 21-08-2023. Wooden Furniture Tenders in bathinda Punjab. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 14-Aug-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 21-08-2023 |
| Sl. No. | Item Description |
| 1 | M&L to repairs Bed plywood topby replacing the following unserviceable parts with first class teakwood.Rest all as per drawings and directed by Engr-in-charge.(DRG NO. FD-246/247/213) |
| 2 | Long leg. |
| 3 | Short leg. |
| 4 | Long rail. |
| 5 | Stiffener. |
| 6 | 3.5 thick teak face plywood, including half round teakwood beading if broken, ofboth side of head rest complete. |
| 7 | 3.5 thick teak face plywood, including half round teakwood beading if broken, ofboth side of foot rest complete. |
| 8 | Plywood 12mm thick(9 ply) BWR Gde of suitable size (1980mm x 920mm) in single piece as per shown in drg. |
| 9 | M&Lto repair Table Peg by replacing the following unserviceable parts with teakwood /prelaminated MDF Board (exterior gde).Rest all as per drawings and directed by Engr-in-charge. (DRG NO. FD-384/277/236) |
| 10 | Top (460mm x 310mm) made out of 18mm thick pre-laminated exterior gde MDF board OSL (Designation PLMDF-12) one side Classic walnut face and balancing white on other side with teakwood beading 4x18mm thick all around of suitable size fixed by panel pin and adhesive with diamond cut pattern finishing at corners . Rest all as per the drawings and directed by Engr-in-charge. |
| 11 | Leg made out of first class teakwood. |
| 12 | Front rail made out of first class teakwood. |
| 13 | Side rail made out of first class teakwood. |
| 14 | Bottom rail made out of first class teakwood. |
| 15 | S&F PVC shoe 15mm dia of approved quality. |
| 16 | M&L to repair Teapoyby replacing the following unserviceable parts with teakwood /prelaminated MDF Board (exterior gde). Rest all as per drawings and directed by engr-in-charge. (DRG NO. FD-382/278/232/34) |
| 17 | Top (460mm x 610mm)made out of 18mm thick pre-laminated exterior grade MDF board OSL (Designation PLMDF-12) one side Classic walnut face and balancing white on other side with teakwood beading 4x18mm thick all around of suitable size fixed by panel pin and adhesive with diamond cut pattern finishing at corners . Rest all as per the drawings and directed by Engr-in-charge. |
| 18 | Leg made out of first class teakwood. |
| 19 | Front rail made out of first class teakwood. |
| 20 | Side rail made out of first class teakwood. |
| 21 | Bottom rail made out of first class teakwood. |
| 22 | S&F PVC shoe 20mm dia of approved quality. |
| 23 | M&Lto repairTable Center by replacing the following unserviceable parts with teakwood /prelaminated MDF Board (exterior gde). Rest all as per drawings and directed by Engr-in-charge.(DRG NO. FD-134/235/ 274) |
| 24 | Top 910mm x 460mm) made out of 18mm thick pre-laminated exterior grade MDF board OSL (Designation PLMDF-12) one side Classic walnut face and balancing white on other side with teakwood beading 4x18mm thick all around of suitable size fixed by panel pin and adhesive with diamond cut pattern finishing at corners . Rest all as per the drawings and directed by Engr-in-charge. |
| 25 | Leg made out of first class teakwood. |
| 26 | Front rail made out of first class teakwood. |
| 27 | Side rail made out of first class teakwood. |
| 28 | Bottom rail made out of first class teakwood. |
| 29 | S&F PVC shoe 20mm dia of approved quality. |
| 30 | M&L to repair Table 900mm x600mm without drawerby replacing the following unserviceable parts with first class teakwood /prelaminated MDF Board (exterior gde).Rest all as per drawings and directed by Engr-in-charge. (DRG NO. FD-284/231/223/55/42(M)) |
| 31 | Top made out of 18mm thick pre-laminated exterior grade MDF board OSL (Designation PLMDF-12) one side Classic walnut face and balancing white on other side with teakwood beading 4x18mm thick all around of suitable size fixed by panel pin and adhesive with diamond cut pattern finishing at corners. Rest all as per the drawings and directed by Engr-in-charge. |
| 32 | Leg made out of first class teakwood. |
| 33 | Front/rear rail made out of first class teakwood. |
| 34 | Side rail made out of first class teakwood. |
| 35 | Stiffener made out of first class teakwood. |
| 36 | S&F PVC shoe 20mm dia of approved quality. |
| 37 | M&L to repair Table 900mm x600mmwith drawer by replacing the following unserviceable parts with first class teakwood /prelaminated MDF Board (exterior gde). Rest all as per drawings and directed by Engr-in-charge. (DRG NO. FD-283/224/41) |
| 38 | Top (910mm x 610mm) made out of 18mm thick pre-laminated exterior grade MDF board OSL (Designation PLMDF-12) one side Naina teak/Classic walnut face and balancing white on other side with teakwood beading 4x18mm thick all around of suitable size fixed by panel pin and adhesive with diamond cut pattern finishing at corners. Rest all as per the drawings and directed by Engr-in-charge. |
| 39 | Leg made out of first class teakwood. |
| 40 | Front/side rail made out of first class teakwood. |
| 41 | Stiffener made out of first class teakwood. |
| 42 | Back rail made out of first class teakwood. |
| 43 | Drawer complete excluding knob. |
| 44 | Front of drawermade out of 18mm thick prelaminated paticle board and 4mmx18mm teakwood beading complete excluding knob. |
| 45 | Bottom of drawer made out of plywood 6mm thick BWR Gde complete. |
| 46 | Side/back of drawermade out of 12 mm thick plywood BWR Gde complete. |
| 47 | S&F PVC shoe 20 mm dia of approved quality. |
| 48 | M&L to repair Table 900mm x900mmby replacing the following unserviceable parts with first class teakwood /prelaminated MDF Board (exterior gde). Rest all as per drawing and directed. (DRG NO. FD-291) |
| 49 | Top (910mm x 910mm) made out of 18mm thick pre-laminated exterior gde MDF board OSL (Designation PLMDF-12) one side Classic walnut face and balancing white on other side with teakwood beading 4x18mm thick all around of suitable size fixed by panel pin and adhesive with diamond cut pattern finishing at corners and polished with high gloss finish of lacquer polish. Rest all as per the drawing and directed by Engr-in-charge. |
| 50 | Leg made out of first class teakwood. |
| 51 | Rail made out of first class teakwood. |
| 52 | S&F PVC shoe 25mm dia of approved quality. |
| 53 | M&L to repair Hat stand with mirror by replacing the following parts with approved ones. Rest all as per drawings and directed by Engr-in-charge. (DRG NO. FD-233/361) |
| 54 | Plywood 3.5/4mm thick OSTF. |
| 55 | First class TW beading at all around of frame. |
| 56 | Mirror 5mm thick. |
| 57 | Brass peg 115-120mm long. |
| 58 | Aluminium nail hook 50mm long. |
| 59 | M&L to repair Table dining (1200mm x900mm) by replacing the following unserviceable parts with first class teakwood /prelaminated MDF Board (exterior gde). Rest all as per drawing and directed by Engr-in-charge. (DRG NO. FD/MAP-II/03) |
| 60 | Topmade out of 18mm thick pre-laminated exterior gde MDF board OSL (Designation PLMDF-12) one side Classic walnut face and balancing white on other side with teakwood beading 4x18mm thick all around of suitable size fixed by panel pin and adhesive with diamond cut pattern finishing at corners. Rest all as per the drawing and directed by Engr-in-charge. |
| 61 | Leg made out of first class teakwood. |
| 62 | Front/rear rail made out of first class teakwood. |
| 63 | Side rail made out of first class teakwood. |
| 64 | Stiffener made out of first class teakwood. |
| 65 | S&F PVC shoe 25mm dia of approved quality. |
| 66 | M&L to repair Table dining6 person by replacing the following unserviceable parts with teakwood /prelaminated MDF Board (exterior gde). Rest all as per drawings and directed by engr-in-charge. (DRG NO. FD-273/239/30(M)/FD/MAP-II/03) |
| 67 | Top ( 1510mm x 910mm) made out of 18mm thick pre-laminated exterior gde MDF board OSL (Designation PLMDF-12) one side Classic walnut face and balancing white on other side with teakwood beading 4x18mm thick all around of suitable size fixed by panel pin and adhesive with diamond cut pattern finishing at corners. Rest all as per the drawings and directed by Engr-in-charge. |
| 68 | Leg made out of first class teakwood. |
| 69 | Front rail made out of first class teakwood. |
| 70 | Side rail made out of first class teakwood. |
| 71 | Stiffener made out of first class teakwood. |
| 72 | S&F PVC shoe 25mm dia of approved quality. |
| 73 | M&Lto repair Table dining8 person by replacing the following unserviceable parts with first class teakwood /prelaminated MDF Board (exterior gde). Rest all as per drawings and directed by Engr-in-charge.(DRG NO. FD-273/239/30(M)) |
| 74 | Top (1810mm x 910mm) made out of 18/19mm thick pre-laminated exterior gde MDF board OSL (Designation PLMDF-12) one side Classic walnut face and balancing white on other side with teakwood beading 4x18mm thick all around of suitable size fixed by panel pin and adhesive with diamond cut pattern finishing at corners. Rest all as per the drawings and directed by Engr-in-charge. |
| 75 | Leg made out of first class teakwood. |
| 76 | Front rail made out of first class teakwood. |
| 77 | Side rail made out of first class teakwood. |
| 78 | Stiffener made out of first class teakwood. |
| 79 | S&F PVC shoe 25mm dia of approved quality. |
| 80 | M&L to repair Table dressing gents with mirror by replacing the following unserviceable parts withfirst class /teakwood/prelaminated MDF board (exterior gde)/plywood BWR gde.Rest all as per drawings and directed by Engr-in-charge. (DRG NO. FD-230/31(M)) |
| 81 | Top made out of 18mm thick pre-laminated MDF board exterior gde OSL (Designation PLMDF-12) one side Naina teak/Classic walnut face and balancing white on other side duly provided teakwood beading infront of suitable size. |
| 82 | All as per item no 12.01 but bottom complete. |
| 83 | All as per item no 12.01 but side complete. |
| 84 | Back ply of base made out of plywood 12mm thick( 9 ply) BWR gde complete. |
| 85 | Only Mirror 5mm thick of suitable size. |
| 86 | Back of mirror made out of plywood 6mm thick BWR Gde complete. |
| 87 | Drawer complete excluding knob. |
| 88 | Front of drawermade out of 18mm thick prelaminated MDF board andteakwood beading complete excluding knob. |
| 89 | Bottom of drawer made out of plywood 6mm thick BWR Gde complete. |
| 90 | Side/back of drawermade out of 12 mm thick (9ply) plywood BWR Gde complete. |
| 91 | M&L to repair Table dressing ladies with mirror by replacing the following unserviceable parts withfirst class teakwood/prelaminated MDF board (exterior gde)/plywood MR gde.Rest all as per drawings and directed by Engr-in-charge. (DRG NO. FD-251/32(M)) |
| 92 | Top made out of 18mm thick pre-laminated exterior gde MDF board OSL (Designation PLMDF-12) one side Naina teak/Classic walnut face and balancing white on other side duly provided teakwood beading infront. |
| 93 | All as per item no 13.01 but bottom complete. |
| 94 | All as per item no 13.01 but side complete. |
| 95 | Back ply of base made out of plywood 12mm thick (9ply) BWR gde complete. |
| 96 | Only Mirror 5mm thick of suitable size. |
| 97 | Back of mirror made out of 6mm thick BWR Gde plywood. |
| 98 | Plain glass 5 mm thick for sliding. |
| 99 | Aluminium channel complete of suitable size for sliding of glass. |
| 100 | Drawer complete excluding knob. |
| 101 | Front of drawermade out of 18mm thick prelaminated MDF board and 4mmx18mm teakwood beading complete excluding knob. |
| 102 | Bottom of drawer made out of plywood 6mm thick BWR Gde complete. |
| 103 | Side/back of drawermade out of 12 mm thick (9ply) plywood BWR Gde complete. |
| 104 | Leg with frame made out of first class teakwood. |
| 105 | M&L to repair Side board by replacing the following items with teakwood /prelaminated MDF board (exterior gde)/ plywood BWR Gde.Rest allas per drawings and directed by Engineer-in-Charge.(DRG NO. FD-241/371) |
| 106 | Top made out of 18mm thick pre-laminatedMDF board exterior gradeOSL (Designation PLMDF-12) one side Naina teak/Classic walnut face and balancing white on other side duly provided first class teakwood beading infront of suitable size. |
| 107 | All as per item No 14.01 but bottom complete. |
| 108 | All as per item No 14.01 but side complete. |
| 109 | All as per item No 14.01 but partition complete. |
| 110 | All as per item No 14.01 but single shutter duly provided teakwood beading on edges complete excluding knob. |
| 111 | All as per item No 14.01 but shelf 18mm thick complete. |
| 112 | Back ply 6mm thick BWR gde complete. |
| 113 | Legs with complete frame made out from first class teak wood. |
| 114 | Drawer complete excluding knob. |
| 115 | Front of drawer made out of 18mm thick prelaminated MDF board and 4mm x 18mm teakwood beading excluding knob. |
| 116 | Bottom of drawer made out of plywood 6mm thick BWR Gde complete. |
| 117 | Side/back of drawer made out of 12mm thick (9 ply) plywood BWR gde complete. |
| 118 | M&L to repair Bin linen multipurpose by replacing the following items with teakwood /prelaminated MDF board (exterior gde)/ plywood BWR gde. Rest allas per drawings anddirected by Engr-in-charge. (DRG NO. FD/E6/MAP/09) |
| 119 | Top made out of 18mm thick pre-laminatedMDF board exterior gradeOSL (Designation PLMDF-12) one side Naina teak/Classic walnut face and balancing white on other side duly provided first class teakwood beading infront of suitable size. |
| 120 | All as per item No 15.01 but bottom complete. |
| 121 | All as per item No 15.01 but side complete. |
| 122 | All as per item No 15.01 but partition complete. |
| 123 | All as per item No 15.01 but single shutter (left) duly provided teakwood beading on edges complete excluding handle. |
| 124 | All as per item No 15.01 but single shutter (right) duly provided teakwood beading on edges complete excluding handle. |
| 125 | All as per item No 15.01 but shelf (left) complete. |
| 126 | All as per item No 15.01 but shelf (right) complete. |
| 127 | Back ply 12mm thick (9 ply) BWR gde. |
| 128 | Legs with complete frame made out from first class teak wood. |
| 129 | Drawer complete excluding handle. |
| 130 | Front of drawer made out of 18mm thick prelaminated MDF board and teakwood beading of suitable size excluding handle. |
| 131 | Bottom of drawer made out of 18mm thick prelaminated MDF board complete. |
| 132 | Side/back of drawer made out of 18mm thick prelaminated MDF board and PVCbeading of suitable size. |
| 133 | CP handle 100mm long of approved quality. |
| 134 | M&L to repairTable writingby replacing the following unserviceable parts withfirst class teakwood/prelaminated MDF board (exterior gde)/plywood BWR gde.Rest all as per drawings and directed.(DRG NO. FD-275/249/33(M)) |
| 135 | Top (1150mm x 610mm) made out of 18mm thick pre-laminated exterior gde MDF board OSL (Designation PLMDF-12) one side Naina teak/Classic walnut face and balancing white on other side with teakwood beading 4x18mm thick all around of suitable size fixed by panel pins and adhesive with diamond cut pattern finishing at corners. Rest all as per the drawings and directed by Engr-in-charge. |
| 136 | Leg made out of first class teakwood complete. |
| 137 | All as per item no 16.02 butfront railcomplete. |
| 138 | All as per item no 16.02 but side railcomplete. |
| 139 | All as per item no 16.02 but side stiffener complete. |
| 140 | All as per item no 16.02 but center stiffener complete. |
| 141 | All as per item no 16.01 but side of cabinet complete. |
| 142 | All as per item no 16.01 but bottom of cabinetcomplete. |
| 143 | All as per item no 16.01 butshutter of cabinetcomplete. |
| 144 | Back of cabinet made out of plywood 6mm thick BWR gde. |
| 145 | Shelf of cabinet made out ofplywood 12 mm thick BWR gde complete. |
| 146 | Drawer complete excluding knob. |
| 147 | Front ofdrawermade out of 18mm thick prelaminated MDF board and 4mmx18mm teakwood beading complete excluding knob. |
| 148 | Bottom of drawer made out of plywood 6mm thick BWR Gde complete. |
| 149 | Side/back of drawermade out of 12 mm thick (9ply) plywood BWR Gde complete. |
| 150 | Brass lock of suitable size with duplicate key complete. |
| 151 | M&L to repair Sofa set 5/4 seater by replacing the following unserviceable parts with first class teakwood.Rest allas per drawings anddirected by Engr-in-charge.(DRG NO. FD-281/373) |
| 152 | Leg. |
| 153 | Arm. |
| 154 | Side rail. |
| 155 | Batton seat/back. |
| 156 | Front rail of single seater. |
| 157 | Front rail of three seater. |
| 158 | Back rest rail top/side of single seater. |
| 159 | Back rest rail side of three seater. |
| 160 | Back rest rail top of three seater. |
| 161 | Removing old foam cushion with tapestry cloth and S&F new P.U.Foam cushion of size 530mmx560mmx100mm (40 density) duly covered with approved quality of tapestry cloth.Make of foam cushion:- sleepwell (Feather Foam) / Kurl-on(Komfort universe goldline plus) / Corfom (Premium Foam) . Note:- Cost of tapestry cloth shall be between Rs 200/- to Rs 250/- per mtr. |
| 162 | Removing worn out tapestry cloth from old cushion and replacing the same with new tapestry cloth of approved quality.Note:- cost of tapestry cloth shall shall be between Rs 200/- to Rs 250/- per mtr. |
| 163 | M&L to repairTV Trolleyby replacing the following unserviceable parts withfirst class teakwood/prelaminated MDF board (exterior gde)/plywood BWR gde.Rest all as per drawings and directed.(DRG NO. FD/E6/MAP/04) |
| 164 | Top made out of 18mm thick pre-laminated exterior gde MDF board OSL (Designation PLMDF-12) one side Naina teak/Classic walnut face and balancing white on other side with half round teakwood beading all around of suitable size fixed by panel pins and adhesive with diamond cut pattern finishing at corners. Rest all as per the drawings and directed by Engr-in-charge. |
| 165 | All as per item no 18.01 above but bottom complete. |
| 166 | All as per item no 18.01 above but shelf complete. |
| 167 | All as per item no 18.01 above but side complete. |
| 168 | All as per item no 18.01 above but back complete. |
| 169 | Glass shutter 5mm thick with hinges of suitable size. |
| 170 | Wheel roller of approved quality. |
| 171 | Magnet catcher of suitable size. |
| 172 | Taking out carefully old existing Knob from side board, table dressing gents, table dressing ladies etc and S&F new decorative Knob 32mm dia of approved quality complete all as specified and directed. |
| 173 | Taking out u/s Bearer of suitable Size from different type of tables likes side board, table writing, table 900 x 600mm with drawer etc and S&F new Bearer of suitable size, made out of first class teakwood complete all as specified and directed. |
| 174 | M & L for preparation of old wooden polished surface of Bed Hard FD-246/247/213 by rubbing down the old polish from wooden surface with sand paper,removing pluck mark with wooden scraper,cleaning of dirt and stopping holes by filling putty (Mixture of fine saw dust, fevicol, water and colour) and adding colour (RawSienna/Brunt Sienna/Turky Umber) of required quantity to obtain the desired colour, wiping off superfluous filler and allow to dry, rubbing off surfaces with sand paper until smooth surfaces is achived, wiping off the polish from other than wooden surfaces with polish thinner and applying lacquer polish till glossy finish is achieved complete all as specified and directed. |
| 175 | M & L for preparation of old wooden polished surface of Table Peg FD-384/277/236 by rubbing down the old polish from wooden surface with sand paper,removing pluck mark with wooden scraper,cleaning of dirt and stopping holes by filling putty (Mixture of fine saw dust, fevicol, water and colour) and adding colour (Raw Sienna/Brunt Sienna/Turky Umber) of required quantity to obtain the desired colour, wiping off superfluous filler and allow to dry, rubbing off surfaces with sand paper until smooth surfaces is achived, wiping off the polish from other than wooden surfaces with polish thinner and applying lacquer polish till glossy finish is achieved complete all as specified and directed. |
| 176 | M & L for preparation of old wooden polished surface of Teapoy FD-382/278/232/34 by rubbing down the old polish from wooden surface with sand paper,removing pluck mark with wooden scraper,cleaning of dirt and stopping holes by filling putty (Mixture of fine saw dust, fevicol, water and colour) and adding colour (RawSienna/Brunt Sienna/Turky Umber) of required quantity to obtain the desired colour, wiping off superfluous filler and allow to dry, rubbing off surfaces with sand paper until smooth surfaces is achived, wiping off the polish from other than wooden surfaces with polish thinner and applying lacquer polish till glossy finish is achieved complete all as specified and directed. |
| 177 | M & L for preparation of old wooden polished surface of Table Center FD-134/235/274 by rubbing down the old polish from wooden surface with sand paper,removing pluck mark with wooden scraper,cleaning of dirt and stopping holes by filling putty (Mixture of fine saw dust, fevicol, water and colour) and adding colour (Raw sienna/Brunt Sienna/Turky Umber) of required quantity to obtain the desired colour, wiping off superfluous filler and allow to dry, rubbing off surfaces with sand paper until smooth surfaces is achived, wiping off the polish from other than wooden surfaces with polish thinner and applying lacquer polish till glossy finish is achieved complete all as specified and directed. |
| 178 | M & L for preparation of old wooden polished surface of Table 900X600mm without drawer FD-284/231/223/55/42(M) by rubbing down the old polish from wooden surface with sand paper,removing pluck mark with wooden scraper,cleaning of dirt and stopping holes by filling putty (Mixture of fine saw dust, fevicol, water and colour) and adding colour (Raw Sienna/Brunt Sienna/Turky Umber) of required quantity to obtain the desired colour, wiping off superfluous filler and allow to dry, rubbing off surfaces with sand paper until smooth surfaces is achived, wiping off the polish from other than wooden surfaces with polish thinner and applying lacquer polish till glossy finish is achieved complete all as specified and directed. |
| 179 | M & L for preparation of old wooden polished surface of Table 900X600mm with drawer FD-283/224/41 by rubbing down the old polish from wooden surface with sand paper,removing pluck mark with wooden scraper,cleaning of dirt and stopping holes by filling putty (Mixture of fine saw dust, fevicol, water and colour) and adding colour (Raw Sienna/Brunt Sienna/Turky Umber) of required quantity to obtain the desired colour, wiping off superfluous filler and allow to dry, rubbing off surfaces with sand paper until smooth surfaces is achived, wiping off the polish from other than wooden surfaces with polish thinner and applying lacquer polish till glossy finish is achieved complete all as specified and directed. |
| 180 | M & L for preparation of old wooden polished surface of Table 900X900mmFD-291 by rubbing down the old polish from wooden surface with sand paper,removing pluck mark with wooden scraper,cleaning of dirt and stopping holes by filling putty (Mixture of fine saw dust, fevicol, water and colour) and adding colour (Raw Sienna/Brunt Sienna/Turky Umber) of required quantity to obtain the desired colour, wiping off superfluous filler and allow to dry, rubbing off surfaces with sand paper until smooth surfaces is achived, wiping off the polish from other than wooden surfaces with polish thinner and applying lacquer polish till glossy finish is achieved complete all as specified and directed. |
| 181 | M & L for preparation of old wooden polished surface of Table dining 1200x900mmFD-FD/MAP-II/03 by rubbing down the old polish from wooden surface with sand paper,removing pluck mark with wooden scraper,cleaning of dirt and stopping holes by filling putty (Mixture of fine saw dust, fevicol, water and colour) and adding colour (Raw Sienna/Brunt Sienna/Turky Umber) of required quantity to obtain the desired colour, wiping off superfluous filler and allow to dry, rubbing off surfaces with sand paper until smooth surfaces is achived, wiping off the polish from other than wooden surfaces with polish thinner and applying lacquer polish till glossy finish is achieved complete all as specified and directed. |
| 182 | M & L for preparation of old wooden polished surface of Table dining 6 persFD-273/239/30(M)/FD/MAP-II/03 by rubbing down the old polish from wooden surface with sand paper,removing pluck mark with wooden scraper,cleaning of dirt and stopping holes by filling putty (Mixture of fine saw dust, fevicol, water and colour) and adding colour (Raw Sienna/Brunt Sienna/Turky Umber) of required quantity to obtain the desired colour, wiping off superfluous filler and allow to dry, rubbing off surfaces with sand paper until smooth surfaces is achived, wiping off the polish from other than wooden surfaces with polish thinner and applying lacquer polish till glossy finish is achieved complete all as specified and directed. |
| 183 | M & L for preparation of old wooden polished surface of Table dining 8 persFD-273/239/30(M) by rubbing down the old polish from wooden surface with sand paper,removing pluck mark with wooden scraper,cleaning of dirt and stopping holes by filling putty (Mixture of fine saw dust, fevicol, water and colour) and adding colour (Raw Sienna/Brunt Sienna/Turky Umber) of required quantity to obtain the desired colour, wiping off superfluous filler and allow to dry, rubbing off surfaces with sand paper until smooth surfaces is achived, wiping off the polish from other than wooden surfaces with polish thinner and applying lacquer polish till glossy finish is achieved complete all as specified and directed. |
| 184 | M & L for preparation of old wooden polished surface of Hat stand with mirror FD-233/361 by rubbing down the old polish from wooden surface with sand paper,removing pluck mark with wooden scraper,cleaning of dirt and stopping holes by filling putty (Mixture of fine saw dust, fevicol, water and colour) and adding colour (Raw Sienna/Brunt Sienna/Turky Umber) of required quantity to obtain the desired colour, wiping off superfluous filler and allow to dry, rubbing off surfaces with sand paper until smooth surfaces is achived, wiping off the polish from other than wooden surfaces with polish thinner and applying lacquer polish till glossy finish is achieved complete all as specified and directed. |
| 185 | M & L for preparation of old wooden polished surface of Table dressing gents with mirror FD-230/31(M) by rubbing down the old polish from wooden surface with sand paper,removing pluck mark with wooden scraper,cleaning of dirt and stopping holes by filling putty (Mixture of fine saw dust, fevicol, water and colour) and adding colour (Raw sienna/Brunt Sienna/Turky Umber) of required quantity to obtain the desired colour, wiping off superfluous filler and allow to dry, rubbing off surfaces with sand paper until smooth surfaces is achived, wiping off the polish from other than wooden surfaces with polish thinner and applying lacquer polish till glossy finish is achieved complete all as specified and directed. |
| 186 | M & L for preparation of old wooden polished surface of Table dressing ladieswith mirror FD-251/32(M) by rubbing down the old polish from wooden surface with sand paper,removing pluck mark with wooden scraper,cleaning of dirt and stopping holes by filling putty (Mixture of fine saw dust, fevicol, water and colour) and adding colour (Raw Sienna/Brunt Sienna/Turky Umber) of required quantity to obtain the desired colour, wiping off superfluous filler and allow to dry, rubbing off surfaces with sand paper until smooth surfaces is achived, wiping off the polish from other than wooden surfaces with polish thinner and applying lacquer polish till glossy finish is achieved complete all as specified and directed. |
| 187 | M & L for preparation of old wooden polished surface ofSide BoardFD-241/371 by rubbing down the old polish from wooden surface with sand paper,removing pluck mark with wooden scraper,cleaning of dirt and stopping holes by filling putty (Mixture of fine saw dust, fevicol, water and colour) and adding colour (Raw Sienna/Brunt Sienna/Turky Umber) of required quantity to obtain the desired colour, wiping off superfluous filler and allow to dry, rubbing off surfaces with sand paper until smooth surfaces is achived, wiping off the polish from other than wooden surfaces with polish thinner and applying lacquer polish till glossy finish is achieved complete all as specified and directed. |
| 188 | M & L for preparation of old wooden polished surface of Bin linen multipurposeFD-FD/E6/MAP/09 by rubbing down the old polish from wooden surface with sand paper,removing pluck mark with wooden scraper,cleaning of dirt and stopping holes by filling putty (Mixture of fine saw dust, fevicol, water and colour) and adding colour (Raw Sienna/Brunt Sienna/Turky Umber) of required quantity to obtain the desired colour, wiping off superfluous filler and allow to dry, rubbing off surfaces with sand paper until smooth surfaces is achived, wiping off the polish from other than wooden surfaces with polish thinner and applying lacquer polish till glossy finish is achieved complete all as specified and directed. |
| 189 | M & L for preparation of old wooden polished surface of Table writingFD-275/249/33(M) by rubbing down the old polish from wooden surface with sand paper,removing pluck mark with wooden scraper,cleaning of dirt and stopping holes by filling putty (Mixture of fine saw dust, fevicol, water and colour) and adding colour (Raw Sienna/Brunt Sienna/Turky Umber) of required quantity to obtain the desired colour, wiping off superfluous filler and allow to dry, rubbing off surfaces with sand paper until smooth surfaces is achived, wiping off the polish from other than wooden surfaces with polish thinner and applying lacquer polish till glossy finish is achieved complete all as specified and directed. |
| 190 | M & L for preparation of old wooden polished surface ofSofa set 5 seaterFD-281/273 by rubbing down the old polish from wooden surface with sand paper,removing pluck mark with wooden scraper,cleaning of dirt and stopping holes by filling putty (Mixture of fine saw dust, fevicol, water and colour) and adding colour (Raw sienna/Brunt Sienna/Turky Umber) of required quantity to obtain the desired colour, wiping off superfluous filler and allow to dry, rubbing off surfaces with sand paper until smooth surfaces is achived, wiping off the polish from other than wooden surfaces with polish thinner and applying lacquer polish till glossy finish is achieved complete all as specified and directed. |
| 191 | M & L for preparation of old wooden polished surface ofSofa set 4 seaterFD-281/273 by rubbing down the old polish from wooden surface with sand paper,removing pluck mark with wooden scraper,cleaning of dirt and stopping holes by filling putty (Mixture of fine saw dust, fevicol, water and colour) and adding colour (Raw Sienna/Brunt Sienna/Turky Umber) of required quantity to obtain the desired colour, wiping off superfluous filler and allow to dry, rubbing off surfaces with sand paper until smooth surfaces is achived, wiping off the polish from other than wooden surfaces with polish thinner and applying lacquer polish till glossy finish is achieved complete all as specified and directed. |
| 192 | M & L for preparation of old wooden polished surface of TV Trolley FD/E6/MAP/04 by rubbing down the old polish from wooden surface with sand paper,removing pluck mark with wooden scraper,cleaning of dirt and stopping holes by filling putty (Mixture of fine saw dust, fevicol, water and colour) and adding colour (Raw Sienna/Brunt Sienna/Turky Umber) of required quantity to obtain the desired colour, wiping off superfluous filler and allow to dry, rubbing off surfaces with sand paper until smooth surfaces is achived, wiping off the polish from other than wooden surfaces with polish thinner and applying lacquer polish till glossy finish is achieved complete all as specified and directed. |
| 193 | Note:- Net contract sum shall be calculated after deduction of Sch of credit. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
