Military Engineer Services-MES has published Tender For Repair To Steel Wooden Furniture Tp At Af Station Chakeri Kanpur. Submission Date for this Tender is 11-11-2023. Wooden Furniture Tenders in chakeri Uttar Pradesh. Bidders can get complete Tender details and download the document.
Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
1 | 14-Aug-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 21-08-2023 |
2 | 21-Aug-2023 | CORRIGENDUM1 | Date | 20-09-2023 |
3 | 20-Sep-2023 | CORRIGENDUM NO. 02 | Date | 14-10-2023 |
4 | 19-Oct-2023 | CORRIGENDUM NO. 03 | Date | 11-11-2023 |
Sl. No. | Item Description |
1 | Visitor Chair Cushioned with arms w/o Castor Wheels (Drg No : TP):-Taking out the old existing unserviceable following parts of Chair Cushioned with arms w/o castor wheels and Supply & Fixing following new parts of the same complete with the help of approprirate nuts, bolts and washers complete all as specified and directed. |
2 | Seat |
3 | Back |
4 | Handle |
5 | Sofa three seater (Branded)(Drg No : TP):-Taking out U/S tapestry/fabric cloth including replacement foam cushion etcfrom sofa three seater(one large piece) Make: Godrej/Featherlite/Furline/ any other make / model/shape TP andS&F new tapestry /fabric cloth incl cushion etc as required , matching with the existing shape and size as directed by GE/ Engr -in -Charge (Cost of tapestry cloth not less than Rs 350/- per meter) |
6 | Sofa two seater(Branded)(Drg No : TP):- Taking out U/S tapestry/ fabric cloth including replacement foam cushion etcfrom sofa two seater(one piece) Make: Godrej/ Featherlite/ Furline/ any other make/model/shape TP andS&F new tapestry /fabric cloth incl cushion etc as required , matching with the existing shape and size as directed by GE/ Engr -in -Charge(Cost of tapestry cloth not less than Rs 350/- per meter) |
7 | Sofa single seater(Branded)(Drg No : TP) :- Taking out U/S tapestry/fabric cloth including replacement foam cushion etcfrom sofa single seaterMake: Godrej/Featherlite/Furline/ any other make/model/shape TP andS&F new tapestry /fabric cloth incl cushion etc as required , matching with the existing shape and size as directed by GE/ Eng -in -Charge (Cost of tapestry cloth not less than Rs 350/- per meter) |
8 | Cabinet filling steel(Drg No : TP):- |
9 | Taking out unserviceable locksfrom Cabinet filling steel and S&F of new locksof existing shape & size with duplicate keys as approved by GE complete all as specified and directed. |
10 | M&L for preparation of Cabinet filling steel by cleaning the dirt with abrasive cloth and applying two coats of synthetic enamel paint OG /Grey,internally & externally complete all as specified and directed. |
11 | Book Case steel Glazed (FD 1028 &TP) :- |
12 | Taking out unserviceableglass fromBook casesteelglazedand S&F of newglassto door of book case steel glazed complete all as specified and directed. |
13 | Taking out unserviceable lockfrom book casesteel glazed Godrej and S&F of new lockof existing shape & size with duplicate keys as approved by GE complete all as specified and shown in drg |
14 | M&L for preparation ofbook case steel glazed Godrej by cleaning the dirt with abrasive cloth and applying two coats of synthetic enamel paint OG /Grey, internally & externally complete all as specified and directed and shown on drawing . |
15 | Cabinet filling steel (Drg No : TP):- |
16 | Taking out U/S tapestry cloth from seat & back of Chair steel and cushion seat and backand S&F new tapestry cloth of approved quality & shade including replacement of foam cushion and plywood etc complete all as specified and directed. |
17 | M & L for Paintingofchair steel with writing pad and cushion seat and back with two coats ofwhite synthetic enamel paint after preparing of surfaces by scraping with abrasive cloth complete all asspecified and directed by Engr-in-Charge. |
18 | Charpoy Folding IP with hard top (Drg No : FD 388 R) :- |
19 | Taking out old U/S Existing ply wood top from charpoy IP Folding and S&F of new 12mm thick commercial ply wood in two pieces BWR grade of same shape and size rest all as per drgincluding welding of broken frameof charpoy IP foldingas and where requiredcomplete all as specified and directed . |
20 | M & L for Paintingofcharpoy folding IP with hard topwith two coats ofblack synthetic enamel paint after preparing of surfaces by scraping with abrasive clothcomplete all asspecified shown on drg and directed by Engr-in-Charge . |
21 | Bed Hard with ply top (6"x3")(Drg No : FD/E6/MAP/08R) :- |
22 | Taking out old U/S Existing ply wood top from Bed hard with ply top and S&F of new 12mm thick commercial ply top BWR grade of same shape and size rest all as per drgincluding welding of broken frameof bed hard with ply topas and where requiredcomplete all as specified and directedby Engineer - in -Charge. |
23 | M & L for Paintingofbed hard with ply topwith two coats ofblack synthetic enamel paint after preparing of surfaces by scraping with abrasive clothof bed hard with ply top complete all asspecified, shown on drg and directed by Engr-in-Charge. |
24 | Taking out U/S rubber shoes from Bed hard with ply top and S & F new rubber shoes of best quality matching with the existing shape & size as approved by Engr-in-charge |
25 | Table Bed Side steel:(Drg No : FD/E6/MAP/15R) :- |
26 | Taking out old unsevicable following components of table bed side as and where required from table bed side and S&F following new components of existing shape and size complete all as specified shown on drawing and directed:- |
27 | Sides made of 18mm thick prelaminated MDF board veneered teak face one side and other face balancing white,exterior grade. |
28 | Top made out of 18mm thick prelaminated MDF board veneered teak face one side and other face balancing white,exterior grade including 4 mm thick beading all around. |
29 | Bottom made out of 18mm thick prelaminated MDF board veneered teak face one side and other face balancing white,exterior grade. |
30 | Back ply 6mm thick plywood, BWR grade, commercial type |
31 | Removing U/S knob from table bed side steel and S&F new brass knob best quality as per drg and directed by Engr-in-charge . |
32 | Taking out old U/S drawer of table bed side steel and S&F of new drawer to be made of 12mm thick, well seasoned sheesham wood planks and 6mm thick commercial ply at bottom of drawers complete all as specified shown on drawing and directed. |
33 | Taking out U/S rubber shoes from table bed side steel and S & F new rubber shoes of best quality matching with the existing shape & size as approved by Engr-in-charge |
34 | M & L for Paintingoftable bed side steelwith two coats of synthetic enamel paint (black) after preparing of surfaces by scraping with abrasive clothcomplete all asspecified shown on drg and directed by Engr-in-Charge. |
35 | Shoe RackSteel:(Drg No : FD/E6/MAP/02R) :- |
36 | Taking out old U/S Shelvesfrom shoe Rack steel and S&F ofnewShelvesof existing shape and size as directed by Eng -in -Charge |
37 | M&L for welding of broken frame of shoe Rack steel as and where required complete all as specified and directed by Engr-in-charge |
38 | M & L for Paintingofshoe Rack Steelwith two coats ofsynthetic enamel paint(black) after preparing of surfaces complete all asspecifiedshown on drg and directed by Engr-in-Charge. |
39 | Taking out U/S rubber shoes from shoe Rack steel and S & F new rubber shoes of best quality matching with the existing shape & size as approved by Engr-in-charge |
40 | Rack steel 5/6 tier(Drg No : FD-1038) :- |
41 | Taking down existing unserviceable shelf of Rack steel 5/6 Tier and S&F of new shelf made of 1mm thick mild steel of existing shape and size complete allas specified, shown on drg and directed. |
42 | M&L for preparation of Rack steel 5/6 Tier by cleaning the dirt with abrasive cloth and applying two coats of synthetic enamel paint, internally & externally complete all as specified shown on drawing and directed. |
43 | Rack side steel 3/4 spaces (Drg No : FD-1023) :- |
44 | Taking down existing unserviceable shelves of Rack side steel 3/4 spaces and S&F of new shelves made of 1mm thick mild steel of existing shape and size complete allas specified, shown on drg and directed. |
45 | M&L for preparation of Rack side steel 3/4 spaces by cleaning the dirt with abrasive cloth and applying two coats of synthetic enamel paint, internally & externally complete all as specified on drawing and directed. |
46 | Table 1520x860x760mm (Drg No : TP) :- |
47 | Taking out oldU/Stop from table 1520x860x760mm andS & F of new top 18 mm thickpre laminated MDF board veneered teak face one side and other face balancing white,exterior gradeand providing 4mm thick teak wood beadingall around the topof table complete all as specified, shown on drg and as directed by Engr-in-Charge . |
48 | M&L for preparation of old/new wooden exposed surfaces by way of scrapping, rubbing, cleaning & applying one coat of high class French polish till glossy finish Complete all as shown on drgs andas directed. |
49 | Table computer (TP) |
50 | Taking out the old existing unserviceable following parts of 3"X2" Table Computer and Supply & Fixing following new parts of the same complete with the help of approprirate nuts, bolts and washers complete all as specified and directed. |
51 | Top made out of 18mm thick prelaminated MDF board veneered teak face one side and other face balancing white,exterior grade including 4 mm thick beading all around. |
52 | Shelf made out of 18mm thick prelaminated MDF board veneered teak face one side and other face balancing white,exterior grade including 4 mm thick beading all around. |
53 | Drawer made out of 18mm thick prelaminated MDF board veneered teak face one side and other face balancing white,exterior grade including 4 mm thick beading all around. |
54 | New Key board with slider |
55 | New Caster Wheel |
56 | Chair computer (TP) :- |
57 | Taking out the old existing unserviceable following parts of Chair Computer and Supply & Fixing following new parts of the same complete with the help of approprirate nuts, bolts and washers complete all as specified and directed. |
58 | Seat |
59 | Back |
60 | Base |
61 | Coaster wheel |
62 | Chair revolving executive High Back (TP) :- |
63 | Taking out the old existing unserviceable following parts of Chair revolving executive High Back and Supply & Fixing following new parts of the same complete with the help of approprirate nuts, bolts and washers complete all as specified and directed. |
64 | Seat |
65 | Back |
66 | Base |
67 | Coaster wheel |
68 | Hydraulic assembly (Gas Lift ) |
69 | Handle |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail