Tender For Construction / Repair Of Drain / Cc Road At Various Places In Ward No 33
Tender Value
24.89 Lakhs
Estimated cost
Bid Submission
04 Aug 2023
0 days left
EMD
50000
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
losal → Rajasthan
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction / Repair Of Drain / Cc Road At Various Places In Ward No 33
BOQ
| Sl. No. | Item Description |
| 1 | Road Work |
| 2 | Dismantling of existing structures like culverts, bridges, retainingwalls, CC road and other structure comprising of masonry, cementconcrete, wood work, steel work, including T&P and scaffoldingwherever necessary, sorting the dismantled material, disposal ofunserviceable material and stacking the serviceable material with all lifts and lead of 50 metres as directed by Engineer. |
| 3 | Cement Concrete Grade M-15 and above and PCC blocks |
| 4 | Lime Concrete, cement concrete grade M-10 (1:5:10) and below |
| 5 | Carriage of Materials by mechanical transport including loading, unloading and stacking :: Earth 2 Km |
| 6 | Providing, laying, spreading (with paver finisher only) and compacting wet mix macadam (WMM) base course comprising of graded stone aggregate and granular material conforming to MORT&H specifications (Table 400-II) in layers of equal compacted thickness each consolidated, including pre-mixing the material with water at OMC in mechanical mixer (Pug Mill), carriage of mixed material by tippers to site, laying in uniform layers in base course on a well prepared sub-base/ base course and compacting with power vibratory-roller to achieve the desired density complete as per MoRT&H specification clause - 406 including all material, labour, machinery, lighting, guarding and maintenance of diversion. |
| 7 | Centring and shuttering with plywood or steel sheet upto two stories or height upto 7.5 metre above plinth level including strutting, propping etc. and removal of form for :Foundations, footings, bases of columns, etc. for mass concrete. |
| 8 | Providing and laying lean cement concrete 1:4:8 in Sub- base over aprepared sub-grade with coarse and fine aggregate conforming toIS: 383, the size of coarse aggregate not exceeding25 mm,aggregate cement ratio not to exceed15:1aggregate gradation after blending to be as per table6001,cementcontent not to beless than 150 kg/ cum,optimum moisture content to be determined during trial length construction, concrete strength not to be less than10 Mpa at 7 days, mixed in a batching plant, transported to site, laidwith a paver with electronic sensor, compacting with 8-10 tonnesvibratory roller, finishing and curing complete as per clause 601, 112of MoRT&H specification including all material, labour, machinerylighting, guarding and maintenance of diversion. |
| 9 | Providing and laying un-reinforced, plain cement concrete mix with Concrete Mixer & vibrator pavement over a prepared sub base with 43 grade cement , coarse and fine aggregate conforming to IS: 383 maximum size of coarse aggregate not exceeding 25 mm, mixed asper approved mix design, laid, spread, compacted and finished in acontinuous operation including provision of contraction expansionconstruction and longitudinal joints etc including all material, labour machinery, lighting, guarding and maintenance of diversion. PCC M-20 |
| 10 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level : 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 11 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded20mm nominal size stone aggregate) finished with a floating coat ofneat cement including cement slurrybut excluding the cost of nosing of steps etc. complete. 40mm thick |
| 12 | Structural steel work in single section fixed with or withoutconnecting plate including cutting, hoisting, fixing in position andapplying a priming coat of approved steel primer all complete. |
AI Tender Summary
Tender Timeline
Jul 24, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedAug 04, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedAug 07, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender