Construction Of Pump House At G. T. Road In Ward No.- 5 , Under Bhadreswar Municipality .
Tender Value
4.49 Lakhs
Estimated cost
Bid Submission
04 Aug 2023
0 days left
EMD
8991
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
bhadreswar → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Pump House At G. T. Road In Ward No.- 5 , Under Bhadreswar Municipality .
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation of foundation trenches of drains, in all sorts of soil (including mixed soil but excluding laterite and complete)a) Depth of excavation not exceeding 1,500 mm. Page No.- 1, item No.- 2(a) (M1) |
| 2 | Earth work Filling in foundation trenches, plinth with good earth by in layers not exceeding 150 mm. including Watering and ramming etc . Layers by layers a) with earth obtained from excavation of foundation . (M1)Page- 1 , item no.- 3/a |
| 3 | Filling in foundation or plinth with silver good earth by in layers not exceeding 150 mm. including Watering and ramming etc . Layers by layers a) with earth obtained from excavation of foundation . (M1)Page- 2 , item no.- 4/b |
| 4 | Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper earth and filling joints with powered earth or local sand. At Gr. Floor for acquarium & at garage . (M1)Page-14, Item.No.1/A |
| 5 | Ordinary Cement concrete (1:2:4 with graded stone chips(20 mm. normal size) excluding shuttering and reinforcement, if any, in ground flooras per relevant IS codes. Page-24, Item.No.4 (M1) |
| 6 | Ordinary Cement concrete (Mix 1:1.5:3) with graded stone chips(20 mm.normal size) excluding shuttering and reinforcement, if any, in ground flooras per relevant IS codes. 1) Pakur Variety . Page-26, Item.No.10/(a) (M1) |
| 7 | Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups,binders etc. including supply of rods, initial straightening and removal of loose rust (if necessary ) cutting torequisite length hooking and gauge black annealed wire at every intersection complete as per drawing and direction . i (.JSW/SRMB/SHYAM)....Page No.- 43 irem no.- 40/(a)/i/l |
| 8 | Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard woodplanks of approved thickness with required bracing for concrete slabs... out completion of works (upto roof of ground floor ) (M7) a) 25 mm to 30 mm thick wooden shuttering as per decision & direction of Engineer-In-Charge. Page- 42 item No.- 30/(a&f) |
| 9 | Brick work with 1st class bricks in cement mortar (6:1) in Foundation & plinth in Superstructure , (E7) Page No.- 29 , Sl No.- 21/a & Sl. No.- 21/b |
| 10 | Plaster (to wall, floor, ceiling etc) with sand & cement mortar including nosing & drip course where necessary (A1) |
| 11 | A) 20mm thick plaster(1:6 ) B) 15 mm thick (1:6) |
| 12 | c) 10 mm. thick (1:4) page no.- 151 , sl. No.- 2(i/b,c&ii/c) |
| 13 | Neat cement punning 1.5mm thick in wall, dado, window, sills, floor,drain etc. (M1) P-323, Sl.No.7 |
| 14 | 125 mm, thick Brick work with 1st class bricks in cement mortar(E7) in Ground FloorPage No.- 29 , Sl No.- 29 |
| 15 | 25 mm. thick damp proof with cement concrete (1:1.5:3) (with graded stone aggregate 10 mm. normal size ) and painting the top surface with a coat of bitumen [VG.40] Using 1.7 Kg. Per Sq.m. Including heating the bitumen and cost and carriage of all materials complete |
| 16 | M.S. OR W.I Ornamental grill of approved design joints continuously welded with M.S , W.I . Flats and bars of windows , railing etc. fitted and fixed with necessary screws and lugs in ground floor . (M6) i) Grill weighing above 10 kg./sq.mtr. And up to 16 kg./sq.mtr. p-104, sl. no. 13/i |
| 17 | Supplying, 1.5 mm. thick M.S. sheet Fitting & Fixing on one or both faces of M.S./W.I. gate etc. with point welding at not more than 150 mm apart complete in all respect as per design including cost of all labour and materials , p-105,sl.no.- 15(M6) |
| 18 | (a) Openable steel windows as perIS sizes with side hunge shutters and horizental glazingbars with or without fixing typeventolators (the extra rate admissible for the openable portion only .) (M4) vi) Steel peg stay 300 mm. long including fitting & fixting Page -107 / Sl. No.- 20/b |
| 19 | iv) two nose steel handel including fitting & fixting . |
| 20 | vi) Steel peg stay 300 mm. long including fitting & fixting Page -107 / Sl. No.- 20/b |
| 21 | Supplying best Indian sheet pans set in putty and fitted and fixed with nails and putty complete . (M4) i) 3mm. Thk. (wt. 7.4 kg/sq.m.) Page No.- 166, Sl. No.- 1(i) |
| 22 | Supplying , fitting , & fixing UPVC Pipes A- types and fittings Conforming to IS :13592-1992 with all necessary clamps nails , including making holes in walls , fllor etc. (M1) i) 75 mm. dia. Page No.- 173 , Sl. No.- 21/(A/i) |
| 23 | (a) Priming one coat on sheet or other metal surface with synthetic oil bound primer of apprived quantity including smoothening surfaces by sand papering etc. (A1) . |
| 24 | (b) Priming one coat on timer or plastered surface with synthetic oil bound primer of apprived quantity including smoothening surfaces by sand papering etc. (A1) P- 200, Sl. No.- 1/a & b |
| 25 | M.S. Structural works in roof trusses with tubular sections conforming to IS:806-1968 & IS: 1161-1998 connected to one another with bracket , gusset cleats as per design , direction of Engineer -in -charge complete including cutting to requisite size , febrication with necessary metal arc welding conforming to IS:816-1969 & IS:814-2004 , haulage , hoisting and erection all complete. i) For truesses spanning up to 12.00 m. p- 100 , Sl. No.- 2/a . |
| 26 | Supplying , fitting & fixing Zn-Al alloy (55% Al & 45% Zn) coating of 150 grams per sq. metre (followed by colour coated on both side) steel sheet work having minimum yield strength of 550 Mpa of trapizoidal profile of approved make (excluding the supporting frame work) fitted and fixed with 55 mm. & 25mm. self tapping screw , epdm washer 16 mm. dia & 3 mm. th. washer etc. complete with 150 mm. end lap. i) In Roof :- P-82 , Sl. No.- 4/a |
| 27 | (A) Painting with best quality synthetic enamel paint of approved make and brand including smoothing surface by sand papering etc. including using of approved putty etc. on the surface , if necessary : (A1) (a) on timber or plastered surface: with super gloss (hi-gloss)- (iv) Two coats (with any shade except white) |
| 28 | (b) On sheet or other metal surface : with super gloss (hi-gloss)- (iv) Two coats (with any shade except white ) page- 200 , Sl. No. - 2/(a/iv & b/iv) |
| 29 | Add Central + state GST @ 18% |
| 30 | Add Labour welfare cess @ 1% |
AI Tender Summary
Tender Timeline
Jul 24, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedAug 04, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedAug 07, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender