Tender For Construction Of New Work And Boundary Wall Raising At Girls Ashram Hostel Hardi Block Bassi Jaipur
Tender Value
14.21 Lakhs
Estimated cost
Bid Submission
31 Jul 2023
0 days left
EMD
28420
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
jaipur → Rajasthan
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of New Work And Boundary Wall Raising At Girls Ashram Hostel Hardi Block Bassi Jaipur
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling old plaster or skirting, racking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meter. |
| 2 | Plaster on new surface on wall in cement sand mortar 1:4 including racking of joints etc. complete fine finish. (20 mm) |
| 3 | Supplying and Fixing fixed wire gauge of 14 mesh x 24 gauge to the metal frame of rolled section by metal beading 20 x 3 mm with suitable screw at not exceeding 150 mm distance . |
| 4 | Providing and fixing M.S. sheet 1mm thick single leaf door shutter in angle iron frame 35x35x5 mm suitabilty diagonally braced with 25x3 mm flat iron above and below lock rail of size 50x5 mm beading extra including extra including all fitting as per direction of Engineer incharge but excluding the cost of choukhat including two coat of anti- corrasite redoxide primer paint ( add extra for using G.I. sheet 22 SWG . insteed of M.S. sheet ) . |
| 5 | Add extra for double leaf shutter 20% |
| 6 | Minor Repairing work ofdoor and window.( Hand Draft, Hinges, Belding,Handle & Bend Removing) |
| 7 | P & F WVC wash basin ( 1st quality, IS:2556 mark) of approved make with C.I. brackets duly painted , 1 No. 15 mm C.P. Pillar cock ( IS: 8934 mark) and 32 mm C.P. brass waste coupling of approved make, 25 mm G.I. waste pipe complete including cutting and making good the wall. Size 510 mm X 400 mm. |
| 8 | P & F G.I. pipes ( Internal work ) with G.I. Fittings excluding union ( IS:1239 Mark) & MS clamps including cutting and making 20mm dia. Nominal bore. \"B\" class.good the walls and floors. |
| 9 | 25mm dia. Nominal bore. \"B\" class. |
| 10 | P & F G.I. pipes ( External work ) with G.I. Fittings excluding union ( IS:1239 Mark) including trenching & refilling earth etc.20mm dia. Nominal bore. \"B\" class. |
| 11 | 25mm dia. Nominal bore. \"B\" class. |
| 12 | P& F bib cock (IS: 8931 mark ) superior quality of approved makeC.P. Brass bib cock, 15 mm nominal bore. |
| 13 | P & F Inlet Connection ( Angle Valves ) superior quality , of approved make,for wash basin, gyser etc. C.P. Inlet connection 15 mm Brass ( IS : 8931 marked ) . |
| 14 | P & F Ball Cock (IS : 1703 Mark) with rod & PVC Ball complete. Brass wt. 400 gm, 15mm nominal bore. |
| 15 | P & F PVC storage Tank ISI Marked ( IS : 12701 ) indicating the BIS license No. of approved make with cover , 25 mm dia. 1m long G.I. over flow pipe & 25 Cm long wash out pipe with plug & socket , including making connection etc. complete of approved design,500 Litres capacity |
| 16 | 1000 Litres capacity |
| 17 | P & F rigid PVC Pipe (IS:4985 mark) II/(4Kg/Sq.cm) approved quality / make including joining the pipe with solvent cement rubber ring and lubricant.75 mm dia. |
| 18 | 110 mm dia. |
| 19 | Construction of chamber in all type of soil with 300 mm thick masonry in CM 1:6 m 10 cm thick C.C. 1:5:10 in foundation, 20mm thick insider plaster in Cm 1:6, finished with floating neat cement, 50mm thick M-15 grade C.C. flooring , earthwork etc. complete as per design including disposal of surplus earth within a lead of 50 mtr.Inside size 300 X 300 mm depth upto 0.5 MCement cover with frame. |
| 20 | Construction of soakage well in all type of soil with 300 mm thick dry masonry, top and bottom 300 mm course in CM 1:6, 80mm thick stone slab, jointing of slab in CM 1 : 3, Ralthal, Kharanja, 40 mm thick M-15 grade C.C flooring , earthwork complete as per approved drawing including disposal of earth within a lead of 50 mtr.:Size 300 Cm. dia outside & 300 Cm. depth . |
| 21 | Construction of septic Tank in all types of soil with 40 Cm .thick masonry in CM 1:6, 15 Cm thick C.C bed of 1:5:10, M-15 grade C.C flooring & over stone slab covering ,80 mm thick slab ,jointing of slab in CM 1:3. Ralthal, Kharanja,50 mm thick stone partition walls, 20 mm thick plaster in CM 1:6 finished with neat floating cement, 4 Nos C.I foot rests of approved design ,two No. 450 mm dia each Ferro cementcover with frame, earth work etc. complete as per approved drawing including disposal of surplus earth within a lead of 50 mtr:- Size 400 x140x150 cm.(for 50 users) |
| 22 | Earth work in excavation over areas (exceeding 30cm in depth. 1.5 Mtr. In width as well as 10 Sqm on plan) including disposal of excavated earth lead up to 50m and with all lift disposed earth to be levelled and neatly dressed: All kinds of soil. |
| 23 | Providing and laying granular sub-base material having P.I. not more than 6 including spreading in layers not exceeding 150 mm compactedthickness and consolidation by 8-10 tonne power roller to required camber and grade including cost of water and hire charges of machineryincluding T&P with all lead (Compacted thickness to be measured).as per MoRTH specification table 400-1, 400-2, For grading-III with CBR value not less than 20.to attain 100% proctor density. |
| 24 | Structural steel work riveted or bolted in built up sections, trusses and framed work, including cutting hoisting fixing in position and applying a priming coat of approved steel primer all complete above linth level upto 4.5 mtr height Hot finished welded type tubes. |
| 25 | Construction of Tube-well upto 100 Meter depth and above in all type of rocks by DTH system and over burden, to accommodate casing pipe of following sizes in all types of soils and over burden including lowering of casing pipes, but excluding cost of casing pipes as per IS: 2800 (Part I & II) 1979 specifications. The work would be completed after obtaining sand free water. The tube well should have a throughout bore .200mm dia Nominal bore |
| 26 | Supply of ERW M.S. black casing pipe ISI marked (IS:4270/1992) of grade Fe410 of following sizes at site of work.200mm dia Nominal bore |
| 27 | S & F tube well cover of M.S.sheet (6mm thick) with nuts and bolts complete for casing size:200mm dia Nominal bore |
| 28 | S&F M.S. clamp, set of 50 x6mm flat iron with nuts and bolts etc. for holding the riser pipe assembly of submersible pump set. |
| 29 | Providing & fixing of HDPE pipe ISI mark (IS:4984/95) for water supply (suitable for submersible & jet pump) with required fittings.50 mm OD 6kg/cm2 |
| 30 | 50 mm OD 4kg/cm2 |
| 31 | SITC of radial / mixed flow submersible motor pump stets IS: marked (IS:8034 1989) of approved make with required connection suitable for T.W./ D.C.B/ Open well. The job includes lowering of riser pipe, G.I./ H.D.P.E. pipe with rope cables, installation of complete fitting and accessories, jointing of elecrical cables up to switch board. All labour for testing of submerible pumps set and supply of water to water mains, complete in all respect. 100 mm diameter submersible pump shall have following HP Rating, phase, 5.0 HP, 3-ø, (68-102) Mtr, ( 225-85 ) LPM |
| 32 | Providing of synthetic rope for submersible pump ISI marked (IS:5175) of following size.16mm (suitable above 50mm & up to 75mm OD pipe) |
| 33 | P/Laying ISI marked P.V.C. insulated submersible cable confirming to IS:694 with flexible copper conductor including making connection etc. as required. 10.0 Sq.mm 3 core flat / Round (Gr.1) |
| 34 | Supply and fixing of Oil / Air break Starter panel made out of sheet steel powder coated enclosure comprising of over load protection relay, short circuit & single phasing protection, ON / OFF push buttons, ammeter, voltmeter, indicating lamps etc. complete in all respect suitable for following rating motors. |
| 35 | P&F Gl pipes (External works) with GI fitting excluding Union (IS 1239 mark) including trencheing & refilling earth etc. A. 25 mm dia nominal bore B class |
| 36 | 32 mm dia nominal bore B class |
| 37 | 50 mm dia nominal bore B class |
| 38 | Making connection of G.1. distribution branch with G.I. main including allUpto 25mm dia |
| 39 | Beyone 25mm upto 100 mm |
| 40 | P&F Full way valve (15 778 mark or wheel valve of approved make.A.Gun-metal 25mm dia nominal bore |
| 41 | Gun-metal 32 mm dia nominal bore |
| 42 | Gun-metal 50 mm dia nominal bore |
| 43 | P & F WVC wash basin (1st quality, 1.5: 2556 mark) of approved make with C.P. pillar cock (1.5: 8934 mark) & 32mm C.P. brass waste coupling of approved make, 25 mm G.1. waste pipe complete including cutting & making good the wall. Size 580 X450 mm. |
| 44 | R R stone masonry work for SUPERSTRUCTURE and plinth in CM 1:6 ( 1 cement : 6 coarse sand ) above 30 cm thick wall . |
| 45 | Providing and fixing precst cement concrete coping 1:2:4 mix 50 mm thick complete with specification. |
| 46 | Plaster on new surface on wall in cement mortar 1:6 with 20 mm thick including curring and rackingetc. complete in all respect . |
AI Tender Summary
Tender Timeline
Jul 24, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedJul 31, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJul 31, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender