Maintenance Of Kanthalloor Deputy Range Officer Quaretrse At Pious Nagar In Kanthalloor Range During 2022-23 &23-24
Tender Value
3.20 Lakhs
Estimated cost
Bid Submission
31 Jul 2023
0 days left
EMD
8010
Bank guarantee accepted
Document Fee
760
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
marayoor → Kerala
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Maintenance Of Kanthalloor Deputy Range Officer Quaretrse At Pious Nagar In Kanthalloor Range During 2022-23 &23-24
BOQ
| Sl. No. | Item Description |
| 1 | 1) 4.1.3-Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level: 1:2:4 (cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) Porch wearing coat(NoxLxBxD:1x11 x3.5x 0.05)Porch wearing coat(NoxLxBxD:1x8 x2.9x 0.05)Car porch pillar foundation (NoxLxBxD:4x0.5 x0.5x 0.5) |
| 2 | 2) 4.1.8 - Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)Damaged toiled floor (NoxLxBxD:1x1.8 x1.5x 0.15) Road (NoxLxBxD:1x8 x2.9x 0.1) Porch (NoxLxBxD:1x11 x3.5x 0.1) |
| 3 | 3) 13.1.1 - 12 mm cement plaster of mix: 1:4 ( 1 cement : 4 fine sand)Porch floor (NoxLxB:1x11 x3.5)Patch work basement(NoxLxB:1x4 x1) |
| 4 | 4) 13.91Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.Total Quantity = 556.950Walls In side-All round (95.8x2.9),Do out side (38.9x4.1),ceiling (10.6x9.4),Cup board in work area, and Kitchen (20) Deducted Quantity = -31.175Door (6x0.9x2) ,Window (5x1.5x1.35),W2 (3x1x1.35),KW (2x1.5x1),Toilet door (2x0.8x2) Net Total Quantity525.775 sqm |
| 5 | 5) 13.99.1Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work .Door (6x0.9x2) ,Window(5x1.5x1.35),W2 (3x1x1.35) ,KW (2x1.5x1),Toilet door ( 2x0.8x2) ,grill (21x0.45x1.3), Cup board ( 1x8x2) |
| 6 | 6) 13.111.1 Finishing walls with Acrylic Smooth exterior paint of required shade :Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surfaceArea same as item no 6 above -L-505.771 |
| 7 | 7) 50.9.1.1- Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately), using good quality Anjili wood /jack wood Replacing damaged dorr frame at bottom (2x0.9x0.1x0.08x1) |
| 8 | 8) 50.9.2.1 - Providing and fixing paneled and glazed shutters for doors, windows and clerestory windows, 35 mm thick shutters including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineerin - charge. using Anjili/ Jack woodwindow shutter (2x0.41x1.27) |
| 9 | 9) 50.14.1.1 - Removing and refixing door shutters after necessary repairs for easy opening and closing etc complete as per the direction of site Engineer-in-charg.All doors except Main entrance door -8 |
| 10 | 10) 50.14.1.2 - Removing and refixing window shutters after necessary repairs for easy opening and closing etc complete as per the direction of site Engineer-in-chargewindow -10 |
| 11 | 11) 50.17.1.4- Supplying and fixing CP Health faucet good quality including cost of materials and labour charges etc. complete as per the direction of site engineer-in-charge. |
| 12 | 12) 2.31-Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared Back side of quarters (12x5) |
| 13 | 13) 10.16.2 -Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished seamless type tubesPipe support, Rafters, Purlins etc. for car porch -L-400 |
| 14 | (14) 12.50 - Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.Porch roof ( 11x3.6) |
| 15 | 15) 9.55.3 - Providing and fixing ISI marked M.S. pressed butt hinges bright finished with necessary screws etc, complete: 75x47x1.70 mmReplacing damaged -16 |
| 16 | 16) 9.97.3 - Providing and fixing aluminium tower bolts, ISI marked, anodised(anodic coating not less than grade AC 10 as per : 1868), transparent or dyed to required colour or shade, with necessary screws complete: 200x10 mmReplacing damaged -16 |
| 17 | 17) 9.100.3 - Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete:75 mm Cup board handle -10 |
| 18 | 18) 50.9.15.3 - Providing and fixing iron hooks and eyes : 200mm. |
| 19 | 19) 50.9.15.5 - Providing and fixing iron hooks and eyes: 100 mm |
| 20 | 20) 11.37 - Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigment etc., complete.Toilet1 - 1.8x1.5 |
| 21 | 21) 17.2.2 - Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: W.C. pan with ISI marked black solid plastic seat and lid -Replacing damaged -1 |
| 22 | 22) od370483/2022_2023 - Engaging coolie for different type of works which cannot be measured in a standard form( Cleaning roof top, Washing fungi from sunshade etc)For cleaning terrace, sun shade etc -3 |
| 23 | 2.0- Purchasing and fitting electrical fittings such as switch, Fan, Fan regulator etc . and special fittings. ( Payment as per GST bill) |
AI Tender Summary
Tender Timeline
Jul 22, 2023
11:30 IST
Tender Published
Tender notice published.
CompletedJul 31, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedAug 03, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender