Tender For Supply Of Construction/Hardware Materials Ie A. Ac Sheet, Cement, Wire Mesh, Ms Pipe, J Hooks And Washer, Binding Wire, Nails, Bituminous Washer Pkt, Waterproof Cement Paint For Goat Shelter & Poultry Shelter. Asbestos sheet 2.25 meter x 1.05 m) Thickness nominal 6mm Over all Width 1.05 m. Laid width 1.01 m, cover efficiency 91% (Allowing for side and end laps with 2.25 m sheet, Weight of 100 sq m as laid 1.40 M Tonnes, Standard Length 2.25 m. colour available Natural Gray Cement (Ultratech) Ordinary Portland Cement (OPC), cement, Per Bag, Fine ness 0.08mm sleve max, initial setting time min 45 minute and maximum setting time max 10 hours. Galvanized Welded Wire Mesh ( 6.10 mx 1.06 m) Type of selvage Galvanized welded wire mesh (Square Type), Mesh size in mm- 1.63 mm, Nominal diameter of Mess wire in mm -1.63 mm, Length of the Fabric in Meter 6.10 m,Width of the Galvanized Chain Linked Wire Mesh (10.97 m x 1.22 m) Fabric in Meter 1.06 m Diameter of the line Wire (mm)-1.63 mm, Number of Line wire in width (44 Lines to 63 Lines), Minimum weight per square meter of Galvanized Iron Wire 1.5 KG to 2.5 KG, The diameter of the wire mesh as per standard wire mesh (SWG) Galvanized Chain liked Wire mesh, Mesh size in mm 2.64mm, Nominal diameter of Mesh wire in mm -2.64mm ,Length of fabric 10.97 m. Width of the fabric in meter- 1.22 m, Diameter of the line wire in mm 2.64 mm Number of fine wire (13) 20) nos, minimum weight per square meter of galvanized iron wire -2.2 kg to 2.5 kg, Diameter of wire mesh in (standard wire mesh hook and Washer Screw Colour silver Finish Type- GI, Item shape 3, Material type Wire wound, Measurement system-Inch Pitch 18 teeth per pitch, Size 6inch standard, Thread length 40 mm Thread type- UNC, Diameter 6mm-10mm, thickness-1.6 mm-7.5mm Binding Wire As per Indian standard code152502:1963. The bindin a wire should be 16 to 18 gauges in size, It shall be free from rust, oil, paint, grease, loose mill scale or any type. Nalls Material Iron, Size- 2 to 3 Inch, Flat head, Diamond Point, Round smooth shank. Bituminous washer packet Each material containing Circular in shape. Free from any damage. The material should be in round or circular shape and packed in a closed packet Length of each pipew Mid steel Pipes (MS) (41.9 42.5) mm OD and 2.6 2.9mm thickness, Weight 2.00 to 2.54 kg/meter Water Proofing Cement Paint(Mint Green) shouldbe 13 or 3.96m. Thickness of the pipe c should be ranges between 2- 2.9 mm. Weight of the Item F should be varied from 2 to 2.54 kg/meter length The ends are cleanly. finished by nominal deburring process. A long hallow, open- ended object of circular cross section, The material shall be free from odour of putrefaction shall be free from lumps, skins and the conditions of r the material shall be such c that settling, if any may be F easily incorporated on stirring When suitably thinned with water, t the material shall mix readily with minimum amount of foaming to a smooth and homogeneous state After the application by brush the resulting film shall show pigment not flocculation, coarseness or other characteristics. undesirable To check the consistency if a metal rod or palette knife Insert into the original container the material shall not cake hard inside the container and shall be in such a condition that stirring easily produces a smooth uniform paint suitable for application.
